Metal Scrap Trading Corporation Limited - Gujarat
41006830 auction sale of lot no: 07 pcb grp :[empty barrel scrap] lot name: empty oil barrel scrap...
41006830 auction sale of lot no: 07 pcb grp :[empty barrel scrap] lot name: empty oil barrel scrap...
41006715 auction sale of lot no: 13 pcb grp :[empty barrel scrap] lot name: oil barrel serviceable...
41006712 auction sale of lot no: 10 pcb grp :[empty barrel scrap] lot name: empty oil barrel (serviceable)...
41005809 auction sale of lot no: 316 pcb grp :[empty barrel scrap] lot name: used / condemned plastic carboys mixed quantity of 30l to 50 l capacity...
41005729 auction sale of lot no: 05 pcb grp :[empty barrel scrap] lot name: empty oil barrel scarp...
40994005 tender for biennial rate contract for removal and replacement of support insulators & shaft insulators with guard ring and shifting of oil barrel for esp rectifier transformer of esp system in stage ii at wtps on as & when required basis...
40984296 auction sale of lot no: 02 pcb grp :[empty barrel scrap] lot name: empty oil barrel scrap (210 ltr oil capacity)...
40977284 auction sale of scrap released old used and unserviceable grease with barrel & with / without cover, (grease : approx. 11400 kg + empty drum & cover weight 1200 kg) total lot qty 12.6 mt, quantity put up is purely on visual assessment basis and presently filled in 60 nos barrels.and the chances are there that during actual weightment the proposed quantity may be completed in lesser number of barrels. cpcb certificate required. only mentioned qty. will be delivered. location at roller bearing section, mg w/shop bvp, as is where is basis, mode of delivery in weight, custodian sse (scrap) bvp, loading by purchaser. fdp 50 days....
40956071 tender for supply of plastic barrel....
40950895 tender for yearly rate contract for year 2023 2024 “ci pipes, valves, specials, joints & miscellaneous items” sr. no. description brand size unit 1 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 14.70 kg./mt. 80 mm ø mt. 2 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 18.60 kg./mt. 100 mm ø mt. 3 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 30.10 kg./mt. 150 mm ø mt. 4 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 44.00 kg./mt. 200 mm ø mt. 5 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 59.30 kg./mt. 250 mm ø mt. 6 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 76.50 kg./mt. 300 mm ø mt. 7 ci plain ended barrel pipe confirming to la class of is 1536 2001. weight 96.30 kg./mt. 350 mm ø mt. 8 ci pipe flange ended class a as per is 7181 80 mm ø to 600 mm ø kg. 9 ci plain ended specials tee, end plug, cross, reducer, bend, tail piece, close plate, plain or threaded flange, valve gland etc. weight per no. for specials shall be as per isi 5531 80 mm ø to 300 mm ø kg. 10 ci plain ended specials tee, end plug, cross, reducer, bend, tail piece, close plate, plain or threaded flange, valve gland etc. weight per no. for specials shall be as per isi 5531 350 mm ø to 600 mm ø kg. 11 ci flange ended specials tee, end plug, cross, reducer, bend, tail piece, close plate, plain or threaded flange, etc. weight per no. must be as per isi 1538 80 mm ø to 300 mm ø kg. 12 ci flange ended specials tee, end plug, cross, reducer, bend, tail piece, close plate, plain or threaded flange, etc. weight per no. must be as per isi 1538 350 mm ø to 600 mm ø kg. 13 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 3.00 kg. / no. without nut bolt & rubber ring. 80 mm ø no. 14 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 3.80 kg. / no. without nut bolt & rubber ring. 100 mm ø no. 15 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 6.10 kg. / no. without nut bolt & rubber ring. 150 mm ø no. 16 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 9.00 kg. / no. without nut bolt & rubber ring. 200 mm ø no. 17 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 12.20 kg. / no. without nut bolt & rubber ring. 250 mm ø no. 18 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 14.90 kg. / no. without nut bolt & rubber ring. 300 mm ø no. 19 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 24.70 kg. / no. without nut bolt & rubber ring. 350 mm ø no. 20 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 29.70 kg. / no. without nut bolt & rubber ring. 400 mm ø no. 21 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 34.50 kg. / no. without nut bolt & rubber ring. 450 mm ø n sr. no. description brand size unit 22 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 50.00 kg. / no. without nut bolt & rubber ring. 500 mm ø no. 23 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 10. weight 78.20 kg. / no. without nut bolt & rubber ring. 600 mm ø no. 24 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 9.00 kg. / no. without nut bolt & rubber ring. 200 mm ø no. 25 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 12.50 kg. / no. without nut bolt & rubber ring. 250 mm ø no. 26 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 15.40 kg. / no. without nut bolt & rubber ring. 300 mm ø no. 27 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 26.50 kg. / no. without nut bolt & rubber ring. 350 mm ø no. 28 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 31.40 kg. / no. without nut bolt & rubber ring. 400 mm ø no. 29 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 38.00 kg. / no. without nut bolt & rubber ring. 450 mm ø no. 30 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 54.10 kg. / no. without nut bolt & rubber ring. 500 mm ø no. 31 cid short collar joint with is 8794 mark & with is 5382 marked epdm rubber ring & full threaded ms nut bolt short collar class 15. weight 84.80 kg. / no. without nut bolt & rubber ring. 600 mm ø no. 32 c i d joint without rubber ring & nut bolt non isi short collar class 10 or class 15 or class 20 50 mm ø to 600 mm ø kg. 33 c i d joint without rubber ring & nut bolt non isi long collar class 10 or class 15 or class 20 50 mm ø to 600 mm ø kg. 34 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 80 mm ø no. 35 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 100 mm ø no. 36 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 150 mm ø no. 37 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 200 mm ø no. 38 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 250 mm ø no. 39 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 300 mm ø no. 40 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 350 mm ø no. 41 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 400 mm ø no. 42 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 450 mm ø no. 43 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 500 mm ø no. 44 epdm rubber ring with is 5382 mark suitable for cid joints of isi mark 600 mm ø no. 45 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 80 mm ø no. 46 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 100 mm ø no. 47 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 150 mm ø no. 48 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 200 mm ø no. 49 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 250 mm ø no. 50 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 300 mm ø no. 51 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 350 mm ø no. 52 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 400 mm ø no. 53 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 450 mm ø no sr. no. description brand size unit 54 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 500 mm ø no. 55 sbr rubber ring with is 5382 mark suitable for cid joints of isi mark 600 mm ø no. 56 ms bolt for cid joints 6 mm ø to 25 mm ø dia. length 50 mm ø to 300 mm ø (full threaded or half traded) kg. 57 ci double acting air valve with isi 14845 of ds i type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 80 mm ø no. 58 ci double acting air valve with isi 14845 of ds i type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 100 mm ø no. 59 ci double acting air valve with isi 14845 of ds i type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 150 mm ø no. 60 ci double acting air valve with isi 14845 of ds i type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 200 mm ø no. 61 ci double acting air valve with isi 14845 of ds ii type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 80 mm ø no. 62 ci double acting air valve with isi 14845 of ds ii type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 100 mm ø no. 63 ci double acting air valve with isi 14845 of ds ii type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 150 mm ø no. 64 ci double acting air valve with isi 14845 of ds ii type & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 200 mm ø no. 65 ci kinetic (dk type) air valve with isi 14845 & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 80 mm ø no. 66 ci kinetic (dk type) air valve with isi 14845 & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 100 mm ø no. 67 ci kinetic (dk type) air valve with isi 14845 & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 150 mm ø no. 68 ci kinetic (dk type) air valve with isi 14845 & pn 1.0 of gwssb approved brand (with isi mark) gwssb approved 200 mm ø no. 69 ci tamper proof kinetic air valve confirming to isi 14845 & pn 1.0 (with isi mark) gwssb approved 80 mm ø no. 70 ci tamper proof kinetic air valve confirming to isi 14845 & pn 1.0 (with isi mark) gwssb approved 100 mm ø no. 71 ci tamper proof kinetic air valve confirming to isi 14845 & pn 1.0 (with isi mark) gwssb approved 150 mm ø no. 72 ci tamper proof kinetic air valve confirming to isi 14845 & pn 1.0 (with isi mark) gwssb approved 200 mm ø no. 73 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 80 mm ø no. 74 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 100 mm ø no. 75 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand gwssb approved 150 mm ø no. 76 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 200 mm ø no. 77 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 250 mm ø no. 78 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 300 mm ø no. 79 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 350 mm ø no. 80 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 400 mm ø no. 81 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 450 mm ø no. 82 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 500 mm ø no. 83 ci non return valve (swing check type reflux) single door pattern with is5312_part i of gwssb approved brand (with isi mark) gwssb approved 600 mm ø no. 84 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 400 mmø no. sr. no. description brand size unit 85 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 450 mm ø no. 86 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 500 mm ø no. 87 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 600 mm ø no. 88 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 700 mm ø no. 89 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 800 mm ø no. 90 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 900 mm ø no. 91 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 1000 mm ø no. 92 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 1100 mm ø no. 93 ci non return valve (swing check type reflux) multi door pattern with is5312_part ii of gwssb approved brand (with isi mark) gwssb approved 1200 mm ø no. 94 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 250 mm ø no. 95 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 300 mm ø no. 96 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 350 mm ø no. 97 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 400 mm ø no. 98 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 450 mm ø no. 99 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 500 mm ø no. 100 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 600 mm ø no. 101 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 700 mm ø no. 102 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 800 mm ø no. 103 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 900 mm ø no. 104 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 1000 mm ø no. 105 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 1200 mm ø no. 106 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 1400 mm ø no. 107 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 1600 mm ø no. 108 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 1800 mm ø no. 109 butterfly valve double flanged with is 13095 & pn 1.0 of kirloskar brand kirloskar 2000 mm ø no. 110 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 250 mm ø no. 111 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 300 mm ø no. 112 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 350 mm ø no. 113 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 400 mm ø no. 114 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 450 mm ø no. 115 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 500 mm ø no. 116 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 600 mm ø no. 117 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 700 mm ø no. 118 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 800 mm ø no. 119 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 900 mm ø no. 120 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 1000 mm ø no. 121 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 1200 mm ø no. 122 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 1400 mm ø no. 123 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 1600 mm ø no. 124 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 1800 mm ø no. 125 butterfly valve double flanged with is 13095 & pn 1.0 of upadhyay brand upadhaya 2000 mm ø no. 126 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 50 mm ø no. 127 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 80 mm ø n sr. no. description brand size unit 128 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 100 mm ø no. 129 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 150 mm ø no. 130 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 200 mm ø no. 131 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 250 mm ø no. 132 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 300 mm ø no. 133 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 350 mm ø no. 134 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 400 mm ø no. 135 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 450 mm ø no. 136 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 500 mm ø no. 137 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 600 mm ø no. 138 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 700 mm ø no. 139 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 750 mm ø no. 140 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 800 mm ø no. 141 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kirloskar brand kirloskar 900 mm ø no. 142 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 300 mm ø no. 143 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 350 mm ø no. 144 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 400 mm ø no. 145 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 450 mm ø no. 146 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 500 mm ø no. 147 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 600 mm ø no. 148 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 700 mm ø no. 149 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 750 mm ø no. 150 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 800 mm ø no. 151 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 900 mm ø no. sr. no. description brand size unit 152 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 1000 mm ø no. 153 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 1100 mm ø no. 154 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & as per drawing 1 c of is 14846 with ball thrust bearing and spur gear arrangement with wheel kirloskar brand kirloskar 1200 mm ø no. 155 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 50 mm ø no. 156 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 80 mm ø no. 157 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 100 mm ø no. 158 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 150 mm ø no. 159 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 200 mm ø no. 160 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 250 mm ø no. 161 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 upadhaya brand upadhaya 300 mm ø no. 162 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 50 mm ø no. 163 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 80 mm ø no. 164 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 100 mm ø no. 165 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 150 mm ø no. 166 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 200 mm ø no. 167 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 250 mm ø no. 168 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 ivi brand ivi 300 mm ø no. 169 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 50 mm ø no. 170 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 80 mm ø no. 171 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 100 mm ø no. 172 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 150 mm ø no. 173 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 200 mm ø no. 174 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 250 mm ø no. 175 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 kartar brand kartar 300 mm ø no. 176 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 50 mm ø no. 177 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 80 mm ø no. 178 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 100 mm ø no. 179 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 150 mm ø n sr. no. description brand size unit 180 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 200 mm ø no. 181 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 250 mm ø no. 182 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 durga brand durga 300 mm ø no. 183 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 50 mm ø no. 184 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 80 mm ø no. 185 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 100 mm ø no. 186 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 150 mm ø no. 187 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 200 mm ø no. 188 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 250 mm ø no. 189 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 300 mm ø no. 190 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 350 mm ø no. 191 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 400 mm ø no. 192 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 450 mm ø no. 193 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 500 mm ø no. 194 ci sluice valve confirming to isi 14846 drawing 1 b & pn 1.0 pressure with ss 410 spindle with rising spindle, with wheel kirloskar brand kirloskar 600 mm ø no. 195 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 200 mm ø no. 196 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 250 mm ø no. 197 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 300 mm ø no. 198 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 350 mm ø no. 199 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 400 mm ø 200 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 450 mm ø 201 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 500 mm ø 202 ci sluice valve confirming to isi 14846 drawing 1 c & pn 1.0 pressure with ss 410 spindle with rising spindle, with gear box system & hand wheel of kirloskar brand kirloskar 600 mm ø 203 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 50 mm ø 204 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 80 mm ø sr. no. description brand size unit 205 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 100 mm ø 206 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 150 mm ø 207 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 200 mm ø 208 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 250 mm ø 209 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 suchdeva brand suchdeva 300 mm ø 210 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 50 mm ø 211 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 80 mm ø 212 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 100 mm ø 213 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 150 mm ø 214 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 200 mm ø 215 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 250 mm ø 216 ci sluice valve with isi 14846 & pressure pn 1.0 casted on body with ss 410 spindle & with cap as per drawing 1 b of is 14846 bharat eng works brand bharat eng works 300 mm ø...
40950363 tender for provision of certain cap / mr / mw works under age br ( i ) ( ii ) and age ( e / m ) at af station bhuj; 1 demolitionof unreinforced cement concrete of any description and any position not otherwise specifically provided for complete all as specified and directed by engineer in charge. 2 dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed by engineer in charge. 3 excavating over area n. exc. 1.5m deep and getting out in hard / dense soil complete all as specified and directed by engineer in charge. 4 material & labour for plain cement concrete, type d2, ( 1:4:8 ) , ( using 40mm graded stone aggregate ) in foundationand filling mass concrete complete all as specified and as directed byengineer in charge. 5 formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed by engineer in charge. 6 formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better etc complete all as specified and directed by engineer in charge. 7 formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick ( horizontal or sloping ) complete all as specified and directed by engineer in charge. 8 material & labour for m 30 reinforment cement concre foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed by engineer in charge. 9 material & labour for rcc m 30 ( design mix ) in walls, retaining walls, basement walls, ballast wall and the like any thickness, above top of footings including attached plasters and buttresses etc complete all as specified and directed by engineer in charge. 10 material & labour for m 30 reinforment cement concre slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by engineer in charge. 11 material & labour for tmt bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spiraly for column & hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia complete all as specified and directed by engineer in charge. 12 returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by engineer in charge. 13 removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by engineer in charge. 14 material & labour for precast cement concrete block masonry with solid blocks exc 10cm in width type c1 ( 1:3:6 ) ( using 20mm graded stone aggregates ) and setting in cement mortar 1:6complete all as specified and as directed byengineer in charge. 15 material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in cm 1:6 and finished even and smooth without using extra cement complete all as specified and directed by engineer in charge. 16 material & labour for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by engineer in charge. 17 demolition of brick work or stone / boulder / block masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by engineer in charge. 18 material & labour for cement concrete type b 1, 1:2:4 ( using 20mm graded aggregate ) as in bed blocks for fixing of hold fasts including rendering 15 mm thick with cm 1:6etc complete all as specified and directed by engineer in charge. 19 material & labour for rendering 15mm thick in cm ( 1:4 ) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed by engineer in charge. 20 supply & fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete all as specified and directed by engineer in charge. 21 supply & fix collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed by engr in charge. 22 material & labour for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer on steel surfaces complete all as specified and directed by engineer in charge. 23 cutting upto a depth of 2.5 cm into concrete walls and trimming surfaces as required girth exc 30 cm complete all as specified and directed by engr in charge. 24 material & labour for sub main wiring with two runs ( two runs measured as one run ) of pvc insulated and unsheathed frlsh cable 650 / 1100 volts grade, conforming to is 1536 1977 multi stranded 4 sqmm single core, copper conductor drawn through and including pvc casing capingisi marked with accessories to wall / ceiling with proper saddles and 4 sqmm single core multistranded copper conductor frlsh pvc insulated and unsheathed cable 1100 volts grade, isi marked as earth continuity wire complete all as specified and directed by engr in charge. ( note: two runs of conductor with one run of earth wire and one run of conduit will be measured & paid as one unit ) 25 supply & fix switch socket combination 2 in 1, 6 / 16a flush type 2 modular isi marked complete all as specified and directed by engineer in charge. 26 supply & fix pvc rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed by engineer in charge. 27 supply & fix double door sheet metal enclosures factory made dbsprotection class ip 43, suitable for fixing of mcbs, isolators etc, confirming to is 13032 single pole and neutral 4 ways with 200 amp rated bus bar 240 volts powder coated complete all as specified and directed by engr in charge. 28 supply & fix isolators / mcbs, etc. in distribution board of the following rating and capacities complete all as specified and directed by engineer in charge. 29 mcb spn of 240 volts 20 / 32 / 40 amps capacity, c series, 10 ka 30 mcb sp of 240 volts 6 40 amps capacity, c series, 10 ka 31 mcb tpn of 415 volts 63 amps capacity, c series, 10 ka 32 material & labour for 25 mm thick cement concrete type b 0, 1:2:4using 12.5mm graded aggregate insub base of floors etc complete all as specified and directed by engineer in charge. 33 material & labour for vitrified ceramic light shade 10 mm thick ( sqaure / rectangular ) area of each tiles n.exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed by engineer in charge. 34 all as per item no 30 but in vertical surfaces such as dado, skirting and riser including rendering 10 mm thick in cm 1:4 complete all as specified and directed by engineer in charge. 35 complete removal of existing treatment on wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by engineer in charge. 36 material & labour for preparing new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of chalk whitening complete all as specified and directed by engineer in charge. 37 material & labour for rendering 15mm thick in cement mortar 1:4 ( external ) on brick walls or on concrete surfaces in two coats, 1st coat of 10mm thick and 2nd coat of 5mm thick including mixing with wpc to 2nd coat as per manufacturers instructions, plastered surfaces finished even and smooth without using extra cement, complete all as specified and directed by engineer in charge.note : integral water proofing compound shall be measured and paid separately as ‘supply only’ under relevant items. 38 material & labour for preparing new surfaces of walls and applying two coats of cement base paint over one coat of priming plastered and other surfaces with alkaliresistand priming paintcomplete all as specified and directed by engineer in charge. 39 taking down chowkats or frames with shutters ( without taking off shutters from the frames ) exc. 1.5 sqm but not exc. 4.00 sqmeach complete all as specified and directed by engineer in charge. 40 refixing in the same opening of chowkhat or frames with shutters ( without taking off shutters from the frames ) exc. 1.5 sqm but not exc. 4.00 sqm eachcomplete all as specified and directed by engineer in charge. 41 taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries / rubbish etc complete all as specified and directed by engineer in charge. 42 material & labour for 20mm thick granite work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like including 20mm thick screed bed of cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by engineer in charge. note : cost of screed bed shall deemed to be included in quoted unit rate . 43 supply and install hi wall split units indoor / outdoor of air conditioner complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and eer 3.2.of capacity 1.0 ton complete all as specified and directed by engineer in charge. 44 supply & fix voltage stabilizer electronic wall mounting type suitable for ac upto 1.0 tr for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 v to 250 v with output voltage stablized at 230 v with accurancy of + 2.5% and of capacity 3.0 kva complete all as specified and directed by engr in charge. 45 supply & fix in replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole mcb of 20 amps complete all as specified and directed by engr in charge. 46 supply & fix mcb spn in distribution board of the rating of 5 to 32 amps capacity, c series, 10 ka complete all as specified and directed by engr in charge. 47 excavating in post holes ( or similar holes ) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard / denses soil complete all as specified and directed by engr in charge. 48 material & labour for pcc1:2:4, b2 ( using 40mm graded stone aggregate ) infoundations filling and mass concrete complete all as specified and directed by engineer in charge. 49 supply & fix roof trusses ( framed ) , trussed, posts, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel, retangular / square tubes or flat sections ) including distance pieces, cleats etc fe 410 w ( gde / e 250 ) quality a complete all as specified and as directed byengineer in charge. 50 dismantling frames trusses not exc 10 m length complete all as specified and directed by engr in charge. 51 dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etccomplete all as specified and directed by engr in charge. 52 supply & fix pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. 53 fixing only pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. 54 supply & fix mild steel for wind ties of size 25mm x 5mm for roof including securing bolts , incuding cutting tops to shape as directed , drilling holes and similar works conforming to fe 290 gde e 165 complete all as specified and directed by engineer in charge. 55 material & labour for preparing old or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and directed by engineer in charge. 56 supply & fix ms bed plate any thickness with sleeve pieces riveted or welded complete all as specified and directed by engineer in charge. 57 erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified and directed by engineer in charge. 58 supply & fix in repairs mild steel screw bolts 5 to 10 mm dia of neck ( machine made ) with hexagonal or square heads at one end and screwed theother, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm longcomplete all as specified and directed by engineer in charge. 59 welded steel wire fabric not exc. 4.00 kg supplied & fixed complete to wood of steel members complete all as specified and directed by engineer in charge. 60 excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft / loosesoil soil complete all as specified and directed by engineer in charge. 61 supply & fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe 290 gde e 165 complete all as specified and directed by engineer in charge. 62 supplied & fixed mild steel round bars 10 mm dia and over as in strengthening bars for chain link fencing conforming to fe 290 gde e 165complete all as specified and directed by engineer in charge. 63 supply only chain link ms galvanised fencing of 3.15 mm dia of wire and 40 mmx40mm mesh size ( pitch of wires ) conforming to is 2721:2003 including line wires of 4 mm dia straining bolts, etc including provision of binding wire complete all as specified and directed by engineer in charge. 64 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc ncluding provision of binding wire complete all as specified and directed by engineer in charge 65 supply & fix in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed ( each line wire to be measured ) incl dismantling of old fencing complete all as specified and directed by engineer in charge. 66 material & labour for m 30 reinforment cement concre for columns, pillars, piers, posts and struts complete all as specified and directed by engineer in charge. 67 removing excavated materials at a distance exc. 500 m but n.exc. 1.50 mtr and depositing / spreading and leveling where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by engineer in charge. 68 formwork to sides of pillars, posts, struts, piers, columns and stanchions of retangula / square for rough finished surfaces of concrete etc complete all as specified and directed by engineer in charge. 69 material & labour for mild steel tmt bars 5mm dia, cut to length, bent to shape required, including cranking, stirrups spaces and bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clipsetc complete all as specified and directed by engineer in charge. 70 material & labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; hung as gates, including pintle hinges, stops, hand made sliding bolts, etccomplete all as specified and directed by engineer in charge. 71 material & labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; hung as gates, including pintle hinges, stops, hand made sliding bolts, etccomplete all as specified and directed by engineer in charge. 72 material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in cm 1:3 for fair finished surfaces even and smooth without using extra cement complete all as specified and directed by engineer in charge. 73 supply & fix ms framed work by fabrication such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tanks etcincluding portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to fe.290.gde e 165complete all as specified and directed by engineer in charge. 74 supply & fix ms purpose made butt hinges conforming to fe 290 gde e 165 suitable for fixing to stone / concrete door and window frames including fabrication work etccomplete all as specified and directed by engineer in charge. 75 supply , laying and testing cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty ) 1100 volts grade with stranded aluminium conductor complete all as specified and directed by engineer in charge for the following size of size: 76 120 sqmm 3.5 core 77 50 sqmm 3.5 core 78 10 sqmm 2 core 79 excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard / dense soil soil complete all as specified and directed by engineer in charge. 80 material & labour for sand cushioning for ug cables using dry river sand; gently punning down complete all as specified and directed by engineer in charge. ( note : for measurement purpose punned thickness shall be considered ) 81 supplying and laying un reinforced precast concrete cable cover class lv, type 2, flat, size 300x 180 x 40 mm complete all as specified and directed by engineer in charge. 82 material & labour for straight through joint ( epoxy ) for lt 1100 volts grade, aluminium conductor jointing kits, aluminium ferrules and labour complete for making joints and testing complete for cable size 70 to 120 sqmm, 4 corecomplete all as specified and directed by engineer in charge. 83 material & labour for cutting of existing road for laying gi pipe of size 50 mm including pcc work after laying the cable in gi pipe complete all as specified and directed by engineer in charge. 84 supply & fix tubes light grade of 80 mm bore galvanised with all fitting for cable protection trenches / wall / on pole including necesarry clamps sets and nut & bolts etc complete all as specified and directed by engineer in charge. 85 material & labour for wall mounted fan 400 mm sweep, 240 volts osillation type sturdy & heavy dutypvc blades for higher air dilivery, nickel chrom plated guard, smooth oscillation complete in exisiting wall etc complete all as specified and directed by engineer in charge. 86 material & labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor pvc insulated and unsheathed frlsh cable 1100 volts grade isi marked drawn through and including pvc casing & capping including accessories etc including fixed to wall / ceiling including provn of 1.5 sqmm single core multistranded copper conductor frlsh pvcinsulated and unsheathed as earth wire continuity with and pressed steel terminal box powder coated of suitable size 3mm thick bakelite white / colour sheet top cover isi marked with brass screws and cup washers for housing switches, sockets, fan regulator, one fan / exhaust point controlled by one, one way switch single pole etc complete all as specified and directed by engineer in charge. 87 material & labour for modular switch 1 way 6a 1 modulecomplete all as specified and directed by engineer in charge. 88 supply & fix modular socket 6a 5 pin 2 in 1 combined 2 module 240 volts complete all as specified and directed by engineer in charge. 89 supply & fix modular white cover plate with frame of 3 moduler isi marked complete all as specified and directed by engineer in charge. 90 supply & fix modular surface mounting plastic box of 3 moduler isi marked complete all as specified and directed by engineer in charge. 91 supply & fix steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified and directed by engineer in charge. 92 supply & fix plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment complete all as specified and directed by engineer in charge. 93 surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard / dence soil complete all as specified and directed by engineer in charge 94 rolling and consolidation formation surfaces in cutting using power roller exc 8 tonne but n exc 12 tonne complete all as specified and directed by engineer in charge. 95 material & labour for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed by engineer in charge. 96 material & labour for 100 mm thick cement concrete type c2, 1:3:6using 40mm graded stone aggregate insub base of floors etc complete all as specified and directed by engineer in charge. 97 material & labour for 100 mm thick cement concrete type b1, 1:2:4using 20mm graded stone aggregate as in floors etc complete all as specified and directed by engineer in charge. 98 forming contraction ( dummy ) joints 65mm deep x 10mm wide, filled with sealing compound grade b complete all as specified and directed by engineer in charge. 99 material & labour for point wiring complete with 1.5 sqmm ( nomonal area ) pvc insulated pvc unsheathed multistranded copper conductor single core cable 1100 volts grade frlsh isi marked drawn through and including heavy duty non metalic pvc conduit isi marked not less than 20 mm dia of thickness 1.8 mm concealed in wall roof etc with all connected fittings including pressed steel terminal boxes suitable for mounting modular switches sockets etc and including pvc insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sqmm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittingscomplete all as specified and directed by engineer in charge for: . 100 one light point controlled by one, one way switch single pole. 101 one exhaust fan point controlled by one, one way switch single pole. 102 one 3 pin 5 amps socket out let on independent board. 103 all as per item no.93 here in before but with 2.5 sqmm copper conductor cable for one 3 pin, 15 amps socket out let on independent board complete all as specified and directed by engineer in charge. . 104 supply & fix in replacement of ceiling rose 3 phase, pvc / polycarbonate body complete all as specified and directed by engr in charge. 105 supply & fix modular plastic surface box of module 1 / 2 flush isi marked complete all as specified and directed by engineer in charge. 106 supply & fix modular plastic surface box of module 3 flush isi marked complete all as specified and directed by engineer in charge. 107 supply & fixingin repairs wall mounted decorative ultra slimled lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 w 4 ft indoor decorative with 2 core copper wire from ceiling rose to light fitting complete all as specified and directed by engr in charge 108 supply & fix modular white cover plate with frame of module 1 flush isi markedcomplete all as specified and as directed byengineer in charge. 109 supply & fix modular white cover plate with frame of module 3 flush isi markedcomplete all as specified and as directed byengineer in charge. 110 supply & fix modular blank plate module 1 complete all as specified and as directed byengineer in charge. 111 supply & fix modular switch flush type, 6 amp. sp, one way , 1 module complete all as specified and as directed byengineer in charge. 112 supply & fix modular socket outlet, 3 pin, 6 amp, flush type 2 module complete all as specified and as directed byengineer in charge. 113 supply & fix modular switch 16 amp, flush type 1 module complete all as specified and as directed byengineer in charge 114 supply & fix modularsocket outlet, 3 pin, 6 / 16 amp flush type 2 module complete all as specified and as directed byengineer in charge. 115 material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on completion provn of gi protectionpipe light grade of 32mm bore upto 7.5m length and connected earth wire to earthing test point all as shown in electrical plate no. 3 of ssr part i 2009 and as specified or indicatedand testing on completion including necessary excavation & earthwork in any type of soil, pcc ( 1:3:6 ) type c1 chamber, precast slab 50mm thick in cement concrete ( 1:2:4 ) type b1 ( rein forced with welded steel wire fabric ( xpm ) of weight not less than 4kg / sqm ) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc complete all as specified and as directed byengineer in charge. 116 supply & fix distribution board ( db ) double door type made out of sheet metal enclosures ( crca ) dust and vermin proof db tpn 4 way with 200 amps rated copper bus bar 415 volts with in built mccb 63 amps 16 ka 1 no each bar ip 43 protection fix flush to wall complete all as specified and directed by engr in charge. 117 supply & fix switch piano flush type, 230 / 250 volts 5 amp. sp, one way complete all as specified and directed by engr in charge. 118 supply & fixswitch socket combination 2 in 1, 5 / 15a amp flush type isi marked complete all as specified and directed by engr in charge. 119 supply & fix exhaust fan, steel body ac single phase 230v of size 300 mm sweep with blades and frame and louvers complete all as specified and directed by engr in charge 120 supply & fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed byengineer in charge. 121 supply & fixing led lights fitting 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed byengineer in charge. 122 supply & fix energy saving evironmental friendly long life corrosion resistent impact proof surface mounted luminaire with pc housing & opel finish cover suitable for wet location with led 25 w light source including material and labour 32 mm dia light grade gi pipe bracket with ms clamps complete with nuts and bolts and washers complete all as specified and as directed byengineer in charge 123 supply & fixing amp rating 240v, 10ka c curve miniature circuit breaker ( mcb ) of following poles and current carrying capacity in the mcb db complete with connection testing and commissioningcomplete all as specified and directed by engineer in charge for: . 124 mcb sp 5 to 40 amps 125 mcb spn 32 amps 126 supply & fixing including testing of storage type water heater / geyser of vertical type of capacity 25 ltr, rated 2000w, 230v ac, 50hz auto cutoff with a high tech adjustable thermostat, multifuction saftey valve, powder coated metal body glass lined enamel coated tank material advanced puf insulation magnesium anode coated heating element, red and green indicator lamp, suitable for highrise building suitable for water pressure head upto 8 bars , star rating ( bee ) 5 star high density & thick puf that ensures energy efficiency and reduced electricity bills 15 amps heavy duty plug complete all as specified and directed by engineer in charge 127 supply & fixing cpvc pipes 20mm dia sdr 11 & plain cpvc sdr 11 with all fittings on wall / ceiling complete all as specified and directed by engineer in charge 128 supply & fixing geyser pvc connection 15mm size with ptmt nuts of length 450mm long complete all as specified and directed by engineer in charge 129 supply & fix bib taps, cast copper alloy fancy typechromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size15mm bore complete all as specified and directed by engineer in charge. 130 supply & fix stop valve 15mm dia cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by engineer in charge. 131 material & labour for 25 mm bore galvanised steel tubing medium grade isi marked with all fitting and fixed complete to walls and ceiling or laid in floor / trenches and under road complete all as specified and directed by engineer in charge 132 material & labour for cutting existing steel tubing for alterations or additions of size mm bore complete all as specified and directed by engineer in charge 133 supply & fix gun metal globe / forged valve withiron wheel head screwed both ends for joining iron pipe non rising forged brass spindle class 1 is 778 marked of 25 mm size complete all as specified and directed by engineer in charge. 134 supply & fix 25 mm bore galvanised iron tubes light grade for cable protection complete all as specified and directed by engineer in charge 135 supplying and laying un reinforced precast concrete cable cover class lv, type 1, flat, size 250x 180 x 40 mm complete all as specified and directed by engineer in charge. 136 earth work in excavation by mechanical means ( hydraulic excavator ) means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) n exc 1.5 m deep including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed by engineer in charge. 137 earth work in excavation by mechanical means ( hydraulic excavator ) means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) exc 1.5 m but n exc 3.00 deep including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed by engineer in charge. 138 formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by engineer in charge. 139 material & labour for m 30 reinforment cement concrete beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by engineer in charge. 140 material & labour for m 30 design mix reinforment cement concrete as in chajja complete all as specified and directed by engineer in charge. 141 material & labour for 40 mm thick cement concrete type b 0, 1:2:4 mix ( using 12.5 mm graded stone aggregates ) as in dpc or copings to horizontal or vertical surfacesincludingnecessary use and waste of form work complete all as specified and directed by engineer in charge. 142 material & labour for pcc 1:3:6 type c 0 ( using 12.5 mm graded stone aggregate ) as in roof padding complete all as specified and directed by engineer in charge. 143 material & labour for rendering 10mm thick over rcc roof mixed , in cement mortar 1:3 mixed with integral water proofing compound at the rate of minimum @ 3% by weight of cement and as per manufacturers instructions, finished even and smooth without using extra cement complete all as specified and directed by engineer in charged. ( supply only water proofing compound shall be measured and paid for separately ) 144 priming surfaces and applying normal treatment ( for moderate conditions ) using glass fibre base bitumen felt, grade 2 complete all as specified and directed by engineer in charge. 145 app based polymeric membrane minimum weighing 3kg / sqm and minimum 3mm thick reinforced with polyster non wove fabric ( wt. not less than 150 gms / sqm ) land on primed surface by forced application complete all as specified and directed by engineer in charge. 146 material & labour for cement concrete 1:3:6 ( using 40mm stone graded aggregate ) , 75mm thick as in plinth protection, etc., laid in alternate bays, finishing concrete surfaces even and smooth without using extra cement, complete all as specified and directed by engineer in charge. 147 material & labour for rendering 15mm thick in two layers first coat 10mm thick in cm 1:6 and second coat 5mmthickin cm 1:4 with wate proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed by engineer in charge. note : wpc will be measured and paid separately. 148 supply only water proofing compound complete all as specified and directed by engineer in charge. 149 material & labour for preparation of new surfaces of wall and applying two coats of exterior emulsion paint camoflage pattern paint over a coat of wall primer complete all as specified and directed by engineer in charge 150 material & labour for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by engineer in charge. 151 supply & fix anodised aluminium frame powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by engineer in charge. 152 supply & fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long ( 1 no. ) . hinges type b 21 100mm long ( 2 no. ) suitable handle ( 1 no. ) complete all as specified and directed by engineer in charge. 153 supply & fix sheet glass 4mm thick, ordinary quality and glazing with putty in squares nexc 0.5 sq. m in each pane complete all as specified and directed by engineer in charge. 154 material & labour for treating the backfill in contact withfoundation @ of 7.5 litres ofemulsion per square metre of vertical surface layer of the sub structure in contract with back fill to be measured complete all as specified and directed by engineer in charge. 155 material & labour for treating the top surface of filled earth @ 5 litres chlorophyrophase of emulsion per square metre of surface complete all as specified and directed by engineer in charge. 156 material & labour for treating the soil under plinth protection @ 5 litreof emulsion per square metre of surface area complete all as specified and directed by engineer in charge. 157 supply & fix solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s. square tube, suppling & fixing in opening complete all as specified and directed by engineer in charge. 158 supply & fix factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame, complete all as specified and directed by engineer in charge. 159 supply & fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by engineer in charge. 160 supply & fix aluminium anodised, barrel tower bolts of extruded section length of bolt 150 mm complete all as specified and directed by engineer in charge. 161 supply & fix aluminium handle cast type anodized 150 mm complete all as specified and directed by engineer in charge 162 supply & fix ms butt hinge medium weight cold rolled 100 mm size complete all as specified and directed by engineer in charge. 163 supply & fix vitreous china wash down water closet pan ( pedestal pattern ) , white ( excluding fixing bolts, flushing cistern and flush pipe ) complete all as specified and directed by engineer in charge. 164 supply & fix 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level with inlet, ball valve, float, chain and pull, and bracketscomplete all as specified and directed by engineer in charge. 165 supply & fix seat and cover for pedestal pan complete all as specified and directed by engineer in charge. 166 supply & fix flush pipes to pedestal pan including all joints complete all as specified and directed by engineer in charge. 167 supply & fixing 1000 litre capacity rotational moulded polythelene water storage tank isi marked, cylindrical vertical with closed top hoisted and fixed in position all specified in ssr part i orcomplete all as specified and directed by engineer in charge. 168 material & labour for 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed by engineer in charge. 169 material & labour for non skid ceramic tiles 7 to 8mm thick ( sqaure / rectangular ) area of each tiles exc. 0.06 sqm but n.exc. 0.11sqm as per is 13755 in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by engineer in charge 170 material & labour for 10 mm thick screed bed in cement mortar 1:4 to receive tiles etc on vertical surface of walls complete all as specified and directed by engineer in charge. 171 material & labour for glazed tiles 200mmx300mmx7mm thick in as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles complete all as specified and directed by engineer in charge. 172 supply & fixing pvc connection 15mm size with ptmt nuts of length 600mm long complete all as specified and directed by engineer in charge 173 supply & fix brass chromium plated tubular towel rail 20 mm dia d type 60 cm long between flanges complete all as specified and directed by engineer in charge. 174 material & labour for 15 mm bore galvanised steel tubing medium grade isi marked with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by engineer in charge 175 material & labour for 20 mm bore galvanised steel tubing medium grade isi marked with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by engineer in charge 176 supply & fix stop valves, 20 mm ( isi marked ) cast copper alloy, screwed down, high pressure, with but but fancy type, chromium plated with long shank and cup ( concealed type ) complete all as specified and directed by engineer in charge. 177 supply & fix ball brass valves, high pressure, with polyethylene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed bore of pipe 20 mm size complete all as specified and directed by engineer in charge. 178 supply & fix bevelled edge mirror of size 600mm x 450mm selected quality glass mounted on6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed by engineer in charge. 179 material & labour for pvc ( swr ) gully trap 125 / 110mm, settingand jointing with solvent cement complete all as specified and directed by engineer in charge 180 supply & fix vitreous china wash basin, white flat back, size 550x400mm , excluding taps, waste, chain and plug and porcelain stopper including brackets complete all as specified and directed by engineer in charge. 181 material & labour for32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed by engineer in charge. 182 supply & fix pillar taps of 15 mm bore, fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by engineer in charge. 183 material & labour for cast iron nahani trap, of 75 mm grating including jointing to waste pipe fixed in cement concrete type b 1 ( 1:2:4 ) complete all as specified and directed by engineer in charge. 184 supply & fix 100 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by engineer in charge. 185 supply & fix soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by engineer in charge. 186 supply & fix vitreous china urinals, bowl flat back size 465x355x265 mm ( white ) with grating and unin for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;complete all as specified and directed by engineer in charge. 187 supply & fix angle stop valve of ptmt any colour high pressure screwed for iron pipe and fixed, ( minimum weight 15mm 90gms ) complete all as specified and directed by engineer in charge 188 material & labour for 50 mm thick cement concrete type b 1, 1:2:4 mix ( using 20 mm graded stone aggregates ) as in copings includingnecessary use and waste of form work complete all as specified and directed by engineer in charge. 189 material & labour for providing precast reinforced cement concrete type b 1, 1:2:4 ( using 20mm graded stone aggregate ) as in cover slabs for man holes and set in cement mortar ( 1:4 ) including necessary form workcomplete all as specified and directed by engineer in charge.note: reinforcement steel shall be measured and paid separately 190 material & labour forproviding cement concrete 1:3:6type c 2 ( using 40mm graded stone aggregate ) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for size 200 mm bore of pipe complete all as specified and directed by engineer in charge. 191 material & labour for sail glazed stone ware drain pipes grade a isi marked laid to slope in trenches and jointed in cm ( 1:2 ) and tested complete size 200 mm bore complete all as specified and directed by engineer in charge. 192 material & labour for plain cement concrete, type b2, ( 1:2:4 ) , ( using 40mm graded stone aggregate ) in foundationand filling mass concrete complete all as specified and as directed byengineer in charge....
40929805 tender for repairs to leveling and sand filling pbt and lbt at sarmat range under ge ( af ) jamnagar no.2; 1 m&l for approved earth filling by spreading levelling to make the required level etc. in lbt ( live bombing target ) range including filling of craters complete all as specified and directed.note: ( i ) soil required for filling shall be brought out from outside md land under his own arrangement of contractor. ( ii ) soil shall be free from pebbles, stones, bushes, shrubs and other vegetation, black cotton soil. ( iii ) measurement for filling in crater shall be carried by stack measurement of the soil brought by the contractor. ( iv ) measurement shall be carried out for net finished volume of earth filled subject to 20% deduction due to bulkage. 2 surface excavation in soft / loose soil n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. 3 removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 4 m & l for preparing surface of earth filled gunny bags and earth filled bitumen barrel planted on ground ( exposed surface only ) removing and cleaning ( measured flat ) caked mud and applying one coat of white wash complete all as specified and directed. 5 removing old worn out ( unserviceable ) hdpe bags / gunny bags from stacks filled with sand etc and supply & placing in position new hdpe bags / gunny bags inner laminated layer standard quality, wt. of bag shall not be less than 90 grams per bag and filled with locally available sand / soil ( approx. qty 1.20 cuft in each bags ) including tying properly & stacking neatly, placing the bag at different heights for making pyramid tor pin and applying three coats of white wash on external surface of gunny bags etc complete all as specified and directed. 6 removing of existing damaged bitumen barrel targets planted on ground complete all as specified and directed. 7 supply and erecting in position as target old mild steel barrel ( old bitumen container barrel ) of the size 1.00 meter height and 0.50 meter dia in cylindrical shapes including earth filling inside the barrel up to the rim, including ramming and consolidating soil inside the barrel and applying three coats of white wash on external surfaces of barrels complete all as specified and directed. 8 cross ploughing in any type of soil with disc plough mechanically operated with average depth of 25 cm running the plough in long and traverse direction and cleaning away of all grass / vegetable spoils shrubs under growth roots and removing rubbish including hard objects etc from the surfaces complete all as specified and directed. 9 deployment of mechanical earth mover / excavator ( jcb or hitachi ) incl operator and fuel oil & lubricant etc for levelling of earth around lbt / pbt with loose soil deposited nearby area complete all as specified and directed.note : ( a ) mechanical earth mover / excavator shall be capacity 7.5 ton as specified below: ( i ) bucket capacity 1.1 m3 ( ii ) backhoe load height not less than 3400mm. ( iii ) backhoe dig depth not less than 4450mm. ( iv ) loader clearance at max dump height 2690mm. ( v ) loader dig depth not less than 200 mm ( b ) payment shalll be made for time entry at sarmat range to time exit from sarmat range. ( c ) contractor shall maintain log book containing detail of date / time & location of operation of machine and same shall be signed by engr in charge & contractor. 10 cutting bushes, shrubs and other vegetation from target / alignment area upto ground level incl removing to a distance not exc 50m complete all as specified and directed. 11 m&l for preparation of old painted surfaces of bricks, stones, concrete, ac sheets of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 12 taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 13 m&l for rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed. 14 demolition of brick / stone masonry / block masonry work built in cement mortar or cement lime mortar complete & removal of debris to a distance exc 1.5 km but n.exc 5 km, complete all as specified and directed. 15 m&l for preparation of new plastered surfaces of walls incl plaster / cornices etc and applying two coats of weather proof acrylic based emulsion paint of any tint as approved over one coat of primer applied as per manufactureres instruction complete all as specified and directed. 16 m & l for brick work with subclass ‘b’ bricks, straight or curved on plan exc 6m mean radius, and setting in cement mortar ( 1:6 ) , complete all as specified and directed. 17 m&l for preparation of old decorated surfaces of walls ( plastered / unplastered ) by brooming down and applying two coats of white wash incl cornices complete all as specified and directed. 18 m&l for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed....
40926090 auction sale of lot no: 05 pcb grp :[empty barrel scrap] lot name: empty oil barrael...
40912369 auction sale of lot no: ad1 2 pcb grp :[empty barrel scrap] lot name: empty oil barrel 205 ltr capacity...
40910690 supply of guide bracket for barrel boltguide bracket for barrel bolt,guide bracket for barrel bolt item no. 15 in rdso drg. no. wd 11043 s 01, alt. 1, for bcnhl wagon, mat. spec. is: 2062 e250 with cu gr. a [ warranty period: 30 months after the date of delivery ]...
40909850 auction sale of lot no: 76 bt pcb grp :[empty barrel scrap] lot name: scrap of old and used empty chemicals pvc carboys with/ without lids / caps...
40909849 auction sale of lot no: 75 bt pcb grp :[empty barrel scrap] lot name: scrap of old and used empty ms chemicals drums / ms open mouth drums...
40904549 auction sale of scrap empty oil barrel capacity 182 to 210 ltrs old used and u.s. [total weight approx 6660 kg] mode of delivery will be in number and the weight shown is for reference only...
40904547 auction sale of scrap empty grease barrel with or without lid capacity 182 to 210 kg old used and u.s. [total weight approx 3400 kg] mode of delivery will be in number and the weight shown is for reference only...
40900451 auction sale of tmt scrap, ht strand scrap, ms barrel 200 ltr , battery scrap, waste oil scrap...
40879296 bids are invited for 120 ltr trash barrel total quantity : 315...
40877022 tender for welcome maintenance of omqs in domestic area at af stn naliya.; 1 m&l for preparation of old plastered / unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed. 2 m&l for preparation of old surface of ceiling of any description and applying one coat of white wash complete all as specified and directed. 3 m&l forpreparation of old woodensurfaces of any description not otherwise described exceeding 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. 4 m&l for preparation of old steel surfaces of any description not other wise described exceeding 10 cm width or girth and applying onecoat of synthetic enamel paint complete all as specified and directed. 5 m&l for preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. 6 m&l for 3mm thick wall care putty in two coats of 1.5mm thick each layer on wall and sand papering to obtain a smooth surface complete all as specified and directed. 7 m&l for 3mm thick wall care putty on ceiling in two coats of 1.5mm thick each layer on wall and sand papering to obtain a smooth surface complete all as specified and directed. 8 m&l for cutting and widening existing cracks not exc 10mm in depth in v shape in wall and then filling in cm ( 1:3 ) including making good to facings complete all as specified and directed. 9 m&l for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of with alkali resistant priming paint over 3mm thick layer of wall putty in two coats of 1.5mm thick each layer on wall and sand papering to obtain a smooth surface complete all as specified and directed 10 taking down of cement plaster fromsurfaces of wallof any description including raking out joints, hacking out for key, scrubbing down with water etc including complete treatment if any all as specified. 11 m&l for rendering 15mm thick in two coat ( 10+5mm ) cement plaster on concrete surfaces in cm 1:6 in base coatand2nd coat 5mm thick in cm 1:4 using liquidwater proofing compound ( 2% by weight ) finished the surface even and smooth without using extra cement complete all as directed.note : wpc shall be measured and paid separatly under relevant item of boq as supply only. 12 m&l for rendering 10mm thickcement plaster on concrete surfaces of walls in cm 1:6, finished the surface even and smooth wihout using extra cement etc complete all as specified and directed. 13 m&l for rendering 5 mm thickcement plaster on concrete surfaces of ceiling in cm 1:3, finish the surface even and smooth without using extra cement etc complete all as specified and directed. 14 m&l for preparation of new plasteredsurfaces of walls, and applying two coat of oil bound distemperover a coat of primer complete all as specified and directed. 15 m&l for preparation and applying two coats of 100% premium acrylic emulsion paint having voc less than 50gm / ltr and uv resistance as per is 15489 2004, alkali and fungal resistance, dirt resistance exterior paint of required shadewith silicon additives @1.43 lit / 10sqm over and including priming applied @ 0.90 litre / 10 sqm over new plastered surfaces all as specified and directed 16 m&l for preparation ofnewplasteredof ceiling and applying three coats of white wash complete all as speified and as directed. 17 m&l in repairs for 9mm thick commercial plywood, grade bwr, type bb, fixed with nails to timber framework as inpannel of wooden doors, including replacing wooden beading, applying pink wood primer and two coats synthetic enamel paint etc complete all as specified and directed. 18 hacking out old broken glass ( any thickness, size, quality or description ) from wooden frame or / aluminium / metal frame, glazed with putty or fixed with beads complete all as specified and as directed. 19 s&f 3mm thick sheet glass ordinary quality fixing with oil putty / wooden / aluminium including rubber gasket beads in gf / ff, area of glass pane n.exc 0.50 sqm including replacing damaged beadings complete all as specified and as directed. 20 all as per item no.19 above but3mm thick figured glass pin head type 21 s&f in repairs cup & saucer kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 22 s&f in repairs cutlery kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket, roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 23 s&f in repairs partition kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel heavy size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 24 s&f in repairs plain kitchen basket of size 431x508x200mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 25 s&f in repairs plain kitchen basket of size 431x508x150mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 26 s&f in repairs dish ( plate ) basket of size 431x508x250mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 27 s&f in repair telescopic channel ( heavy duty ) of size 300mmxx450mm long and roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete for each basket of kitchen cabinate complete all as specified and as directed. 28 m&l in repairs for prelaminated particle board 18 / 19mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed for cuboards / shelfs etc. complete all as specified and directed. 29 s&f in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 30 all as per item no: 29 above but 125mm long 31 s&f in repair 300mm long aluminium alloy, anodisedsliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 32 s&f in repairs ms 300mm long ordinary rat tail rod pattern springs including roller and roller plate to the wooden frames or ms frame including welding etc as required complete all as specified and directed. 33 s&f in repair 125mm extruded aluminium handles, cast type, anodised fixed complete all as specified and directed. 34 s&f in repair 150mm extruded aluminiumhandles, cast type, anodisedcomplete all as specified and directed. 35 s&f in repairs 40mm dia brass cup board knobs fixed with screw and washer complete all as specified and directed. 36 s&f in repairs 100mm long aluminium anodised hasp and staplecomplete all as specified and directed. 37 s&f in repairs 25 mm dia stainless steel drapery / curtain rod, complete all as specified and as directed. 38 s&f in repairs fancy type stainless steel curtain road bracket suitable for 25mm dia curtain rods fixed with chromium plated screws complete all as specified and directed. 39 s&f in repairs150mm long floor door stopper ofaluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, with rubber bush fixed complete all as specified and directed. 40 s&f in repairsaluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesrate including taking down aluminium windows / wooden door / wooden windows of any size and refixing to same frame with all fixtures and screws as required to replacement / repair of window complete all as specified and directed. 41 s&f in repairs plastic moulded frame looking mirror of size 600mm x 450mm with selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 42 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises all as directed. 43 m&l for non skid ceramic coloured tiles 7 to 8mm thick, ( square / rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed incoloured cement complete all as specified and as directed. 44 m&l for glazed ceramic coloured tilesover vertical surface of wall, 350x 250x 7mm / 450x350x7mm thick ( or nearest size ) , set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in cm ( 1:4 ) complete all as specified and directed. 45 m&l for vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed incoloured cement complete all as specified and directed. 46 m&l for vitrified ceramic tiles 10 mm thick ( square / rectangular ) as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in cm ( 1:4 ) complete all as specified and directed. 47 demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as directed. 48 m&l 18 20mm thick granite ( of any type ) pre polished in cooking platforms and like fixed with neat cement slurry over 15mm thck cement mortar ( 1:4 ) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 49 taking down chowkat or framesnot exc 1.5 sqm each with shutter ( without taking of shutters from the frame ) complete all as specified and as directed. 50 taking down chowkat or frame with shutter ( without taking off shutter from frames ) exc 1.5 sqm and n.exc 4 sqm complete all as specified and as directed. 51 taking down shutter of any description exc. 1 sqm but n. exc. 2 sqm each complete all as specified and as directed. 52 s&f factory made solid panel pvc doorshutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col our pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified and directed. 53 s&f pvc solid door frame factory made size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced, with ms square, supplying and fixing in opening as per specification complete all as directed. 54 m&l 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. 55 m & l for preparing surfaces of wood and wood based materials, and treating back of chowkats with tar or coal tar black paint all as specified and directed. 56 s & f mild steelhold fast and similar small articlesconforming to fe 290 0 or e 165 all as specified and directed. 57 m&l for cement concrete type c1 1:3:6 ( 20mm graded aggregate ) for hold fasts complete all as specified. 58 s&f 35mm thick second class hard wood factory made plain framed panelled shutters ( two panes ) with lock rail and panel of 9mm bwp commercial ply or 12mm veneered particle board medium density with commercial veneering both face.the size of rail shall be as per is 1003 ( part i ) kiln seasoned and chemically pressure treated all as specified and directed. 59 s & f 35mm thick factory made 2nd class hw glazed / gauzed and skelton shutter open rebated and prepared to receive glass, gauzed etc edges of framing plain chamfered fitted with cut and mitred beads for securing wire mesh all as specified and directed. 60 s&f 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. 61 s&f stainless steel butt hinges medium weight with stainless steel pins 100mm long complete all as specified and directed. 62 s&f in stainless steel butt hinges medium weight with stainless steel pins 75mm long complete all as specified and directed. 63 s&f 150mm aluminium handles cast type ( anodised ) , fixed with steel chromium plated bright screws complete all as specified and directed. 64 s&f 125mm aluminium handles cast type ( anodised ) , fixed with steel chromium plated bright screws complete all as specified and directed. 65 s&f in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 66 all as per item no 65 above but 125mm long 67 m&l forpreparation of new woodensurfaces of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. 68 s&f in repair aluminum door closer hydraulically regulated designation no. 2 universal type ( isi make ) suitable for door shutters of weight between 36 to 60 kg complete all as specified. 69 m&l for wrought plain fillets, square, rectangular or triangular in section area exc 13 sqcm and not 25 sqcm secured with nails and brads complete all as specified and directed including two coats of synethetic enamel paint over a coat of pink primer complete all as specified and directed 70 s&f in repair, plate rack of overall size 24 x 24 x 10 inchmade out of 0.65mm thick stainless steel sheet complete all as specified and directed. 71 s&f in repiars pvc connections 15mm dia with ptmt nuts of length 600mm complete all as specified and directed. 72 taking down pvc pipes including all fittings like shoes, bends, etc of any dia all as specified and directed 73 s&f 110 mm bore pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed 74 s&f 75 mm bore pvc ( swr ) pipe, single socketed in any length rubber joints fixed to walls complete all as specified and directed. 75 m&l in repairs, 75 mm dia pvc ( swr ) floor trap plainwith grating including jointing with solventcement complete all as specified and directed. 76 s&f 75 mm bore pvc ( swr ) bends in any radius complete all as specified and directed. 77 all as per item no. 76 above but for 110mm dia bore 78 s&f 75 mm bore pvc ( swr ) branch piece, single ( single y ) equal or unequal complete all as specified and directed 79 all as per item no.78 above but for 110mm dia bore 80 s&f in repair vitreous china squatting pan, orissa pattern, 630 x 450 mm with integral foot rests including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor ( excluding flushing cisternand flushpipe fixed ) complete all as specified and directed. 81 s&f in repairvitreous china wash down water closet semi pedestal pattern ( anglo indian type ) , white, including pvc sheet cover with fixtures, black / white closed pattern with flat bottom, connection to drain and to flushing pipe, antisyphonage pipe etc ( excluding flushing cistern and flush pipe ) complete all as specified and directed. 82 s&f in repairvitreous china wash down water closet pan ( pedestal pattern ) , whiteincluding ss jet spray ( butterfly ) with braided tube 1.50 mtr and pvc seat cover with fixtures, black / white closed pattern with flat bottom ( excluding flushing cistern and flush pipe ) , including connection to drain ( or out going pipe ) complete all as specified and directed. 83 s&f in repairvitreous china wash basin white, flat back, size 550 x 400 mm including 15mm dia fancy type cp pillar tap, 32mm dia flexible waste pipe and fixing with brackets complete all as specified and directed. 84 s&f in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washer and including bedding in cm to wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 85 s&f in repairs, pvcwater closet seat, black / white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for ewc fixed as in repairs complete all as specified and directed. 86 s&f in repairpvc valveless, syphonic actiontype, 10 ltrs capacity flushing cistern low levelwhite with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. 87 s&f unplasticised pvc pipes of pressure rating with all fittings and fixed to walls and ceilings or laid in floorsfor 15 mm bore of pipe including taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. 88 s&f unplasticised pvc pipes of pressure rating with all fittings and fixed to walls and ceilings or laid in floorsfor 20mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. 89 s&f in repairs pvc waste pipe flexible 32mm or 40mm bore 60cm long for sink or whb complete all as specified and directed. 90 s&f in repairs 15 mm dia cp bib cock with flange complete all as specified and directed. 91 s&fin repairs 15mm bore cp stop cock regular bodycomplete all as specified and directed. 92 s&f in repair 15 mm dia cp pillar cock complete all as specified and directed. 93 s&f in repair 15 mm dia cp angle cock with flange complete all as specified and directed. 94 s&f in repair two way angle cock with flange complete all as specified and directed. 95 s&f in repair 5 overhead abs shower with brass arm 225mm with flange complete all as specified and directed. 96 s&f in repair health faucet with 1mtr ss tube and hook complete all as specified and directed. 97 s&f in repair corner glass shelf 300mm complete all as specified and directed. 98 s&f brass towel rack chromium plated makeprayag / jaquar or equivalent all as specified and directed by engineer in charge 99 s&f in repair brass cp soap dish complete all as specified and directed. 100 s&f in repair brass towel rail complete all as specified and directed. 101 s&f in repair chromium plated wall mixer with l bend complete all as specified and as directed. 102 s&f in repair chromium plated bib tap sink cock regular spout with flange complete all as specified and as directed. 103 s&f in repairs bathroom mirror cabinet plastic fixed to wall of size 300mmx 343mm x250 mm complete all as directed. 104 s&f in repairs cp centre hole basin mixercomplete all as directed. 105 s&f in repair magnet typepvc door stopper 30 to 40mm dia fixed with screw behind the door complete all as specified and directed. 106 supply only liquid water proofing compound...
40869736 tender for “plc upgradation double ended seamer” for our barrel manufacturing plant at vadodara gujarat...
40863354 supply of anaerobic microbial inoculumsanaerobic microbial inoculums,anaerobic microbial inoculums (seeding bacteria) for ir drdo bio toilet tanks used in railway coaches. conforming to rdso spec.no. rdso/2013/cg 12(issue sept 2014). note: (a) supplier shall be a tot holder of drdo as per the list of the vendors issued by drde/drdo, dated 06 jan 2021 (b) supplier should strictly comply cause 3.2 (i) & (ii), 4,5,6 &7 of subject spec. (c) material should be supplied in returnable barrels/containers pasted with details of supply as per rdso drg no. cg18121 (d) supply is to be scheduled as required by consignee. [ warranty period: 30 months after the date of delivery ] senior section engineer gujarat 12000.00 litre => limited...
40839661 auction sale of lot no: scrap/0021 pcb grp :[empty barrel scrap] lot name: washed empty hdpe carboys 15 to 45 ltr.cap.( black & blue both colour)...
40838708 auction sale of lot no: 74/1 23 pcb grp :[empty barrel scrap] lot name: hdpe carboy (cap 20/30/40 ltrs)...
40813493 auction sale of lot no: 62 bt pcb grp :[empty barrel scrap] lot name: old and used empty paint tins/drums of various sizes...
40813486 auction sale of lot no: 55 bt pcb grp :[empty barrel scrap] lot name: scrap of old and used empty ms chemicals drums with/without lids/ caps....
40813485 auction sale of lot no: 54 bt pcb grp :[empty barrel scrap] lot name: scrap of old and used empty ms lube oil drums with/without lids/ caps....
40813484 auction sale of lot no: 53 bt pcb grp :[empty barrel scrap] lot name: scrap of old and used empty chemicals pvc barrels with/without lids/ caps...
40796159 auction sale of lot no: 23/13 pcb grp :[empty barrel scrap] lot name: scrap empty pvc/hdpe drum cap 200 ltr...
40796158 auction sale of lot no: 23/12 pcb grp :[empty barrel scrap] lot name: empty oil & grease barrel cap 209/210 ltr...
40796157 auction sale of lot no: 23/11 pcb grp :[used spent/burnt oil/used lube oil/used engine oil] lot name: dirty oil with barrel...
40795296 auction sale of lot no: 05 pcb grp :[empty barrel scrap] lot name: empty oil barrel (un serviceable)...
40795295 auction sale of lot no: 04 pcb grp :[empty barrel scrap] lot name: empty oil barrel (serviceable)...
40795247 auction sale of lot no: 555.0 pcb grp :[empty barrel scrap] lot name: empty oil barrels (serviceable)...
40790025 supply of guide bracket for barrel boltguide bracket for barrel bolt,guide bracket for barrel bolt item no. 15 in rdso drg. no. wd 11043 s 01, alt. 1, for bcnhl wagon, mat. spec. is: 2062 e250 with cu gr. a [ warranty period: 30 months after the date of delivery ] => limited...
40783133 tender for day to day maintenance at darjipura af station baroda.; 1 s&f in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed. 2 s&f in repair ms butt hinges medium weight cold rolled 100 mm isi marked complete all as specified and directed. 3 s&f in repair extruded aluminum alloy handle 125 mm sizefabricated type complete all as specified and directed. 4 s&f in repair aluminum anodized sliding door bolts 300 mm long with hasp and staple ( bolt type ) complete all as specified and directed. 5 s&f in repair aluminum door closer hydraulically regulated designation no. 2 universal type ( isi marked ) suitable for door shutters of weight between 36 to 60 kg complete all as specified and directed. 6 s & f in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. 7 s&f in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor complete all as specified and directed. 8 s&f in repair magnet typepvc door stopper 30 to 40mm dia fixed with screw behind the doorcomplete all as specified and directed. 9 hacking out old broken glass ( any thickness / size / quality / description ) from metal frame including punching or drilling out old glazing pin / spring clips and providing and fixing new one complete all as specified and directed. 10 s&f 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 sqm in each pane complete all as specified and directed. 11 s&f 4mm thick figured glass pin head type and glazing with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and directed. 12 s&f in repairs 600x450mm, 5.5mm thick mirror aluminum frameof selected quality glass mounted on 6 mm thick ac building board or commercial plywood and fixed to wood plugs with stainless steel screws complete all as specified and directed. 13 s&f in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples / with wooden beading on steel windows / in wooden doors complete all as specified and directed. 14 s&f in repair bracket l type 300x200mm for fixing support as dressing table / study table complete all as specified and directed. 15 re screwing or easing & adjusting with out taking down shutter of and description exc 1 sqm & n.exc 2 sqm complete all as specified and directed. 16 s&f in repair ist class hard wood beading straight glazing / gauged including metered etc and removal old beading complete all as specified and directed. 17 s&fin repair ms rat tail rod pattern spring including roller and roller plate complete of300mm long welding to steel chowkhat complete all as specified and directed. 18 s&f in repair 18 / 19 mm thick pre laminated particle board ( isi marked ) exterior grade, laminated both side fixed with screws to timber frame work in cupboard, cupboard shutter etc complete all as specified and directed. 19 s&f in repair 12 mm thick pre laminated particle board ( isi marked ) exterior grade, laminated both side fixed with screws to timber frame work in cupboard, cupboard shutter etc complete all as specified and directed. 20 s&f in repair continuous ( piano ) hinges mild steel bright finish width of flap 40 mm ( when open ) complete all as specified and directed. 21 s&f 40 mm dia pvc cupboard knob fixed with nut and screw and washer complete all as specified and directed. 22 dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing the rubbish outside md land complete all as specified and directed. 23 m & l for 10mm thick light shade vitrified ceramic tiles, double charge ( square / rectangular ) polished, area of each tile not exceeding 0.36 sqm, in floors etc. over and including 15mm thick screed bedding in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. 24 m&l for non skid glazed ceramic tile of size 300x300x6 to 7 mm thick in floor etc set and jointed in neat cement slurry and pointed in white / coloured cement to match complete all a specified and directed. 25 s&f glazed ceramic tile of size 300x200x7mm thick in patch white on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white cement to match including 10 mm thick rendering in cm 1:3 even and fair to receive tiles etc complete all as specified and directed. 26 s&f glazed ceramic tile of size 300x450x7mm thick in patch white on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white cement to match including 10 mm thick rendering in cm 1:3 even and fair to receive tiles etc complete all as specified and directed. 27 taking down cement plaster of any description including racking out joint hacking for key or scrubbing down with water etc complete all as specified and directed. 28 m&l for 15 mm rendering in patch in cm 1:4 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified including mixing with and including water proofing compound complete all as specified and directed. 29 m&l for rendering 10mm thick in cm 1:6 on brick surfaces finishing even and smooth ( w / o using extra cement ) complete all as specified and directed. 30 m&l preparation ofnewly plastered surface of any description and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and directed. 31 m&l for applying two coat of cement based paint over and including one coat of primer on walls including preparation of new plastered surfaces of walls complete all as specified and directed. 32 taking up or down 15mm bore gi water tubing including all fittings complete all as specified and directed. 33 taking up or down 20mm bore gi water tubing including all fittings complete all as specified and directed. 34 taking up or down 25mm bore gi water tubing including all fittings complete all as specified and directed. 35 s&f 15 mm bore gi water tubing ( isi marked ) medium grade in any length including all fittings fixed to wall or in floor complete all as specified and directed. 36 s&f 15mm bore unplasticised pvc pipeswith all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. 37 s&f 20 mm bore gi water tubing ( isi marked ) medium grade in any length including all fittings fixed to wall or in floor complete all as specified and directed. 38 s&f 25 mm bore gi water tubing ( isi marked ) medium grade in any length including all fittings fixed to wall or in floor complete all as specified and directed. 39 taking up or down 15mm bore gi tube and connections including cleaning and re fixing in same position including necessary fittings complete all as specified and directed. 40 taking up or down 20mm bore gi tube and connections including cleaning and re fixing in same position including necessary fittings complete all as specified and directed. 41 taking up or down 25mm bore gi tube and connections including cleaning and re fixing in same positon including necessary fittings complete all as specified and directed. 42 dismantling of water tanks exc 250 and n. exc. 500 ltr and removing to store complete all as specified and directed. 43 s&f 500ltr rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. 44 dismantling of water tank and removal to store yard exc 500 and n.exc 1000 ltr complete all as specified and directed. 45 s&f 1000ltr rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. 46 s&f in repair 150 x 150mm stainless steel grating fixed on floor / nahani trap complete all as specified and directed. 47 s&f in repairs pvc valve 10 ltr capacity symphonic action type flushing cistern level white with inlet ball valve float and handle push type incl. flush pipe 32 mm dia and connecting to wc complete all as specified and directed. 48 s&f in repairs stop valve cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm size complete all as specified and directed. 49 s&f in repairs fancy type stop valve cast copper alloy screweddown high pressure screwed both ends for iron pipe 15 mm size complete all as specified. 50 s&f in repairs pillar taps cast copper alloy with capston head cp screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm bore complete all as specified and directed. 51 s&f in repairs fancy type pillar taps cast copper alloy cp screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm borecomplete all as specified and directed. 52 s&f in repairs 15 mm bore cp brass bib tap with crutch or butterfly handlesscrewed down screwed for iron pipe complete all as specified and directed. 53 s&f in repairs 15 mm bore cp brass bib tap fancy type screwed down screwed for iron pipe complete all as specified and directed. 54 s&f in repairs vitreous china squatting pan water closet ‘orrisa’ pattern size 580x440mm incl. integral foot rest including cement concrete bedding etc complete all as specified and directed. 55 s&f in repairs vitreous china wash down water closet pan ( pedestal pattern ) , white ( excluding fixing bolt flushing cistern and flush pipe ) complete all as specified and directed. 56 s&f in repairs wash hand basin vitreous china white flat black size 550x400 mm fixed on existing bracket incl. one no cp brass waste fitting & one no pvc connection 15 mm bore 45 cm long heavy duty and connecting to existing gi pipe or stop valve complete all as specified and directed. 57 s&f in repairs vitreous china urinal half stall type, incl. connection to flushing pipe and outgoing pipe complete all as specified and directed. 58 s&f in repair ballvalves high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of25 mm ( min wt 455gm ) complete all as specified and directed. 59 s&f in repair ballvalves high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of20 mm ( min wt 210gm ) complete all as specified and directed. 60 s&f in repair ballvalves high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of15 mm ( min wt 142gm ) complete all as specified and directed. 61 s&f in repairs swan neck pillar taps cast copper alloy with capston head cp screwed down high pressure with or without lettered “hot or cold” with long screwed shank and fly nuts for iron pipes 15 mm bore complete all as specified and directed. 62 s&f in repair 15 mm cp brass two way angle cock stop valvecomplete all as specified and directed. 63 s&f cp brass mixer pillar cock 15mm bore with 02 nos pvc connections complete all as specified and directed. 64 s&f cp brass hot and cold wall mixer cock 15mm bore complete all as specified and directed. 65 s&f 15 mm stainless steel telescopic handspray / shower chromium plated complete all as specified and directed. 66 s&f in repair 15 mm cp brass concealed stop valve complete all as specified and directed. 67 s&f in repair pvc connection 15mm sizewith ptmt nuts of length 60cm complete all as specified and directed. 68 m&l cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with bleaching powder complete all as specified and directed. capacity exc 250ltr and not exc. 500 ltrs. note : date of cleaning shall be marked on tank with synthetic enamel paint and cost of the same deemed to be included in quoted rate. 69 m&l cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder complete all as specified and directed. capacity exc 500ltr and not exc. 1000 ltrs. note : date of cleaning shall be marked on tank with synthetic enamel paint and cost of the same deemed to be included in quoted rate. 70 s&f swivel shower of ptmt any colour for fixing with 15mm pipe minimum weight 40gm fixed in repair complete all as specified and directed. 71 s&f pvc cover for water storage tank of capacity 500ltr / 1000 ltr complete all as specified and directed. 72 s&f in repair pvc box type mirror cabinet 450x350 mm size modular type, complete all as specified and directed. 73 re screwing or easing & adjusting aluminum shutter with out taking down shutter and repair / replacement of butt hinges / pivot of aluminium door area exc 1 sqm & n.exc 4 sqm complete all as specified and directed. 74 re screwing or easing & adjusting 12 mm thick glass doors with out taking down shutter and repair / replacement of pivot of glass shutter areaexc 1 sqm & n.exc 4 sqm complete all as specified and directed. 75 s&f in repairs vitreous china semi pedestal pattern pan white ( anglo indian type ) white ( excluding fixing bolt flushing cistern and flush pipe ) complete all specified and directed. 76 s&f ss plate rack made out of 1 mm thick ss sheetof size 31x36x10 complete all as specified and directed. 77 s & f in repair stainless steel sink with draining board, made out of 1 mm thick sheet for kitchen with plug, washers & waste pipe, including bedding in cement mortar on to dwarf wall or fixed with and including cast iron cantilever brackets and connecting union to pipe, over all size 915mmx460mm bowl size 410mm x 330mm x 160mm all complete complete all as specified and directed. 78 s&f in repair waste fitting ( coupling ) 32mm brass cp for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other and fixed complete all as specified and directed 79 s&f in repair waste fitting ( coupling ) 40mm brass cp for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other and fixed complete all as specified and directed. 80 s&f 32mm dia pvc flexible waste pipe for whb / sink, length 60 to 100cm complete all as specified and directed. 81 s&f 40mm dia pvc flexible waste pipe for whb / sink, length 60 to 100cm complete all as specified and directed. 82 dismantling of ci pipe 100 / 75mm dia and length fixed on walls / floors complete all as specified and directed. 83 s&f 100 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints in trenches or in floor or fixed with wall etc complete all as specified and directed. 84 s&f 75 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints in trenches or in floor or fixed with wall etc complete all as specified and directed. 85 s&f 100mm bore branch piece single ( equal or unequal ) ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed. 86 s&f 75mm bore branch piece single ( equal or unequal ) ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed. 87 s&f 100mm bore bend ( any radius ) with duck foot or heel rest complete all as specified and directed. 88 s&f 75mm bore bend ( any radius ) with duck foot or heel rest complete all as specified and directed. 89 s&f in repair pvc ( swr ) floor trap 75 mm dia including with solvent cement fixed in repair complete all as specified and directed. 90 s&f 150x150mm salt glazed stone ware gully trap ’p’ type fixed in repair in pcc 1:2:4 type b1 30x30x30cm with steel complete all as specified and directed. 91 cutting chases, pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth complete all as specified and directed. 92 taking down chowkats or frames with shutters ( without taking of shutter from the frame ) not exc. 1.5 sqm each complete all as specified and directed. 93 taking down chowkats or frames with shutters ( without taking of shutter from the frame ) exc. 1.5 sqm but n. exc.4 sqm each complete all as specified and directed. 94 taking down shutter of any description n. exc. 1 sqm each complete all as specified and directed. 95 taking down shutter of any description exc. 1 sqm but n. exc. 2 sqm each complete all as specified and directed. 96 m&l for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. 97 s&f factory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 98 m&l 35mm thick 2ndclass hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc ( without shash bar ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing, glass etc size of member of shutter as per specified in ssr part i section 8, clause 8.24 ( a ) supplied and fitted to chowkats complete all as specified and directed. 99 s&f 2nd class hard wood 30mm glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc ( with out sash bars ) including middle stiles overall ( top to bottom ) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securingglass etc size of member of shutter as specified in ssr part i, section 8, clause 8.20 ( a ) and fitted to chowkats complete all as specified and directed. 100 s&fpvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with ms square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed. 101 s&f factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawings complete all as specified and directed. 102 s&f 75mm long ss butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed. 103 s&f for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed complete all as specified and directed. 104 s&f for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. 105 descripton all as per item no 104.00 here in before but 150mm longcomplete all as specified and directed. 106 s&f aluminium alloy anodized sliding door bolt with haps and staple ( bolt type ) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed. 107 s&f 150mm long aluminium handle cast type anodized complete all as specified and directed. 108 m&l for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified and directed. 109 s&f mild steel hold fast etc conforming to fe 410 0 or 310 0 complete all as specified and directed. 110 m&l for cutting holes in brick wall for inserting hold fast etc. built in cm of depth exc. half brick wall and n. exc. one brick wall making good in cm ( 1:3 ) orpcc ( 1:2:4 ) type b0 complete all as specified and directed. 111 s&f 8mm thick glass shelf size 450mmx100mm with ss brackets / rail as approved complete all as specified and directed. 112 s&f 8mm thick glass corner, radius not exceeding 300mm dia with ss brackets / rail complete all as specified and directed. 113 s&f stainless steel peg set of five hooks complete all as specified and directed. 114 s&f door bottom seal for wooden doors made of aluminium channel as approved complete all as specified and directed. 115 s&f stainless steel towel rail, 20mm dia, 600mm long complete all as specified and directed. 116 s&f tubular towel rail, aluminium anodised, 20mm dia, d type, 60 cm long between flanges complete all as specified and directed. 117 s&f ss soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 118 s&f in repair 25 mm dia curtain rod cut to length and fixed complete all as specified and directed. 119 s&f in repairbracket suitable for 25mm diacurtain rod with steel screw / wooden screw complete all as specified and directed. 120 s& f in repair mortice lock 4 lever, vertical type in aluminium doors complete all as specified and directed. 121 supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device complete all as specified and directed. 122 supply & fixing in repair plastic water closet seat ( anglo indian style ) white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed in repairs complete all as specified and directed 123 taking down existing wash hand basin and refixing the same by replacing the existing brackets with new ms angle iron brackets of size 35mm x 35mm x 4mm with 2 coats of painting over a coat of primer making good the disturbed portion etc complete all as specified and directed. 124 m&l for providing pre cast cement concrete type b1, 1:2:4 with using 20 mmgrade stone aggregate set in cm 1:6 as in cover slab ( manhole ) / open drain etc., with plain faces complete all as specified and directed. 125 s & f mild steel tmt bar 10 mm dia and over cut to length bent toshape require, including cranking bending and binding with and including mild wire ( annealed ) not lessthan 0.9 mm dia or securing with clips quality conforming to deformed ortwisted bars complete all as specified and directed. 126 cleaning of blocked kitchen sink including removing and refixing the grating in same position with cement complete all as specified and directed. 127 cleaning of blocked gully trap including removing and refixing the grating in same position with cement complete all as specified and directed. 128 cleaning of blocked whb including removing and refixing the grating in same position with cement complete all as specified and directed. 129 cleaning of blocked ewc complete all as specified and directed. 130 cleaning of blocked iwc complete all as specified and directed. 131 cleaning of inlet chamber complete all as specified and directed. 132 sewage lines cleaning of size upto 150mm dia including manholes through chasis mounted diesel run vehicle mounted hydraulic operated high pressure suction per cum jetting sewage cleaning machine capacity including skilled operator supervising engineer for cleaning / partial desilting of manholes and sewer line as guide lines laid in is 11972 ( 1987 ) complete all as specified and directed. 133 sewage lines cleaning of size upto 200mm dia including manholes through chasis mounted diesel run vehicle mounted hydraulic operated high pressure suction per cum jetting sewage cleaning machine capacity including skilled operator supervising engineer for cleaning / partial desilting of manholes and sewer line as guide lines laid in is 11972 ( 1987 ) complete all as specified and directed. 134 sewage lines cleaning of size upto 300mm dia including manholes through chasis mounted diesel run vehicle mounted hydraulic operated high pressure suction per cum jetting sewage cleaning machine capacity including skilled operator supervising engineer for cleaning / partial desilting of manholes and sewer line as guide lines laid in is 11972 ( 1987 ) complete all as specified and directed. 135 s&f 20mm bib tap standard of ptmt any colour high pressure screwed for iron pipe and fixed ( mimimum wt. 125gms ) complete all as specified and directed 136 m&l for special treatment to sunken portion ( including necessary dismantling of tiles and pcc along with reqired pcc at site of mix 1:2:4 of required thickness ) with 10mm thick plaster in cm 1:4 with wpc liquid complast 421 and applying one coat each of nitoproof 100& nitoproof 120 on plastered surface. rendering again 10mm thk plast in cm 1:4 mixed with complast 421 in sunken portion of wc & ci pipe joint shall be filled including filling of lean concrete in 1:5:10 complte all as specified and directed. 137 m&l framed work ( fe 290 gde e 165 ) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and uides ) and hanging; also fastening and fixing complete all as specified and as directed 138 dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and as directed. 139 s&f in repair 110 mm dia pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and directed. 140 s&f in repair 75 mm dia pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and directed. 141 s&f 110 mm dia pvc ( swr ) bends any length any type complete all as specified and directed. 142 s&f 75 mm dia pvc ( swr ) bends any length any type complete all as specified and directed. 143 s&f 110 mm dia pvc ( swr ) branch piece double ( double y ) equal or unequal complete all as specified and directed. 144 notes: ( a ) notes for cleaning of gt, wt / safaiwala: complaints of such type of repair shall be resolved within 24 hrs of intimation. if complaints not attended in stipulated period a penalty at the double of the quoted rates shall be imposed and no claim whatsoever on this account shall be entertained by the department.in case due to any technical reasons if it is not possible to resolve the issues within stipulated period contractor shall immediately inform the fact to engineer in charge for further directions. ( b ) notes for tap / stop cock / pillar cocks / cp / pvc fittings: complaints of such type of complaints / repairs shall be resolved within 48 hrs of intimation.if complaints not attended in stipulated period a penalty at the double of the quoted rates shall be imposed and no claim whatsoever on this account shall be entertained by the department.in case due to any technical reasons if it is not possible to resolve the issues within stipulated period contractor shall immediately inform the fact to engineer in charge for further directions. 145 ( c ) notes for replacement of wire mesh, glass panes and buidling hardware: complaints of such type of complaints / repairs shall be resolved within 48 hrs of intimation.if complaints not attended in stipulated period a penalty at the double of the quoted rates shall be imposed and no claim whatsoever on this account shall be entertained by the department.in case due to any technical reasons if it is not possible to resolve the issues within stipulated period contractor shall immediately inform the fact to engineer in charge for further directions....
40781380 auction sale of assets plastic barrel drum of assorted capacity of 180 ltr to 200 litre, unused corrugated boxes printed/non printed weighed 650 kgs approx, ....
40766065 bids are invited for ortho trauma implants titanium elastic nail set , ttc nail set , drill bit 2.5, 2.7, 3.5, 4.5mm solid plus cannulated , broken screw removal set , circlage wire gauze 16, 18, 20, 22, 24 , gigli shaw wire , 4.5mm lcdcp broad , 4.5mm locking screw , 4.5mm cortical screw , 4.5mm lcdcp , narrow , 3.5mm distal humerus anatomical locking plate medial and lateral pillar plate , 3.5mm cortical screw, self tapping , 3.5mm locking screw, self tapping , proximal humerus locking plate or philos plate , 3.5 locking screw , 3.5mm cortical screw , extra articular distal humerus plate , 3.5mm locking screw , 3.5mm cortical screw , 3.5 mm recontruction locking plate , 3.5mm cortical screw , 3.5mm locking screw , radius or ulna nail with screw , olecranon plate, hook plate , 3.5mm locking screw, self tapping , 3.5mm cortical screw, self tapping , mini plate set , screws for mini plate , 2.7mm volar and dorsal distal radius anatomical locking plates , 2.7mm locking screw, self tapping , 2.7mm cortical screw , 3.5mm volar and dorsal locking plate or t or oblique plates , 3.5mm cortical screw, self tapping , 3.5 or 4.5mm l and t oblique plate for proximal tibia , 4.5 or 3.5mm cortical screw , 4.5 or 3.5mm locking screw , 3.5 or 4.5mm hockey plate for proximal tibia , 3.5 posterior medial locking plate tibia , raft plat 3.5mm for proximal tibia , 3.5 mm locking screw , 3.5 mm cortical screw , 6.5mm ccs or nccs with washer , 4.0mm ccs or nccs with washer , 3.5mm plate dcp , 3.5mm locking plate lcdcp , universal tibia nail, cannulated , 4.9mm or 3.9mm inter locking bolt , expert tibia nail , 3.5 mm anatomical fibula plate , malleolar screw for medial mallalus , 3.5 mm distal tibia locking plate or spoon plate , 3.5 mm distal tibia locking plate, anterolateral plate , k wire, all size , 3.5 mm calcaneal locking plate , 7.0 mm ccs with washer , proximal femoral nail, short plus long , proximal hip screws 8.0mm, 6.4mm , 4.9mm interlocking bolt , pfna2 , short plus long , blade, cannulated , locking screw , endcap , hip screw 6.5mm , syrus nail , proximal hip screws , 6.4mm , dhs plate, angle 125, 130, 135, 140, 145, 150 degree long and short barrel , leg screws , 4.5mm locking screw , pediatric dhs plate , 4.5 mm locking screw , 4.5 mm cortical screw , liss plate, distal femur locking plate , 3.5mm small t oblique locking plate , 3.5mm reconstruction locking plate , 4.5mm reconstruction locking plate , 3.5mm , 1 bye 3rd tubular plate , humerus interlocking nail , interlocking screw for nail , enders nail , universal femur nail , 3.9 or 4.9 mm inter locking screw , imsc nailor retrograde femural nail , inter locking screws for imsc , clavicle anatomical locking plate , clavicle hook plate , external fixator set , small external fixator set , intramedullary wires size 2.0, 2.5, 3.0 mm. , square nail for radius and ulna size 2.0, 2.5 , femoral distractor large , stainmen pin or st pin size 2.5, 3.0, 3.5, 4.0, 4.5 , guide wire holder clamp , cannulated t handle with chuck , universal interlocking nail extractor , k wire cutter , plier , pointed reduction clamp total quantity : 3518...
40762028 auction sale of lot no: 226/baroda lot name: scrap plastic barrel 200/205/210 ltr cap...
40761325 auction sale of lot no: 30/ahmedabad pcb grp :[used spent/burnt oil/used lube oil/used engine oil] lot name: brunt / used engine oil in barrel of 205/210ltrs cap. with barrel...
40761324 auction sale of lot no: 24/ahmedabad lot name: scrap grees barrel of 180/182 kg. cap....
40761323 auction sale of lot no: 22/ahmedabad lot name: used empty engine oil barrels...
40761090 auction sale of lot no: 30/baroda pcb grp :[used spent/burnt oil/used lube oil/used engine oil] lot name: brunt / used engine oil in barrel of 205/210ltrs cap. with barrel...
40761074 auction sale of lot no: 24/baroda lot name: scrap grees barrel of 180/182 kg. cap....
40761073 auction sale of lot no: 22/baroda lot name: used empty engine oil barrels...
40760158 auction sale of lot no: 226/rajkot lot name: scrap plastic barrel 200/205/210 ltr cap...
40760063 auction sale of lot no: 24/rajkot lot name: scrap grees barrel of 180/182 kg. cap....
40760062 auction sale of lot no: 22/rajkot lot name: used empty engine oil barrels...