Western Railway - Gujarat

33277663 auction sale of condemned and unserviceable released / abandoned rly quarters at location: varnama [ 1 ] qtr no s and t / 1 ( a and b ) , type 2, unit 2. [ 2 ] qtr no t / 2 ( a and b ) , type 2, unit 2. [ 3 ] qtr no t / 3 ( a and b ) , type 2, unit 2 [ 4 ] qtr no e / 1 ( a and b ) , type 2, unit 2. total 8 unit. condemned and unserviceable released / abandoned rly service building quarters at location: mpr [ 1 ] tss ( el s&t 14 ) unit 1. total 9 unit in lot. material. brick masonary 234.74 cu meter, rcc 55.78 cu meter, concrete flooring 95.73 cu meter, wooden doors / frame 55 nos, steel window with frame ( 13 nos ) 845 kg, steel ohe 150 kg wooden window 30 nos, wooden jafri 10 nos, rail / angle / grill 2210 kg, gi pipe 11.20 kg, wooden plank 1.16 cu meter, gi ridge 3 meter, ac sheet 50.24 sq meter.delivery as a lot. custodian: sse works myg. note no. ( 1 ) part payment not allowed. handing over will be given only after full payment. ( 2 ) weight shown are indicative and railway will not be responsible for any shortage and no refund will be made. ( 3 ) purchasers are requested to see / visit the site before bidding. ( 4 ) nf and other than redundant line any material lying on the both side of track will be retained by custodian ( 5 ) dismantling to be done by purchaser. ( 6 ) free delivery period 50 days. ( 7 ) all safety measures should be insure by purchaser and custodian...

Road And Building Department - Gujarat

32456735 supplying and fixing building material dist. bharuch 1 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( a ) loose or soft soil 2 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( b ) dense or hard soil 3 excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( a ) loose or soft soil 4 excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( a ) loose or soft soil 5 filling available excavated earth ( excluding rock ) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 6 filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 7 filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. 8 filling in foundation and plinth with brick bats chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete. 9 boring holes 3.5 m deep in ordinary soil ( for cast in situ piles ) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 meter for following diameter of pipes. ( ii ) 250 mm 10 boring holes 3.5 m deep in ordinary soil ( for cast in situ piles ) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 meter for following diameter of pipes. ( iii ) 300 mm 11 extra for under reaming inside the bore holes for under reamed piles of following diameter. ( ii ) 250 mm 12 extra for under reaming inside the bore holes for under reamed piles of following diameter. ( iii ) 300 mm 13 add to or deduct from the rate for bore holes of 3.5 m depth, bore holes are made deeper or shallower than 3.5m. for piles of following diameter. ( ii ) 250 mm 14 add to or deduct from the rate for bore holes of 3.5 m depth, bore holes are made deeper or shallower than 3.5m. for piles of following diameter. ( iii ) 300 mm 15 providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 crushed stone aggregates 40 mm nominal size ) and curing complete excluding cost of formwork in ( a ) foundation and plinth 16 providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 crushed stone aggregates 20 mm nominal size ) and curing complete including cost of formwork in ( a ) wall caps / coping 17 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 crushed stone aggregates 40 mm nominal size ) and curing complete excluding cost of formwork in ( a ) foundation and plinth 18 providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork in ( a ) foundation and plinth 19 providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork in ( b ) independent piers, columns, and pillars, upto floor two level 20 providing and laying cement concrete work 1:2:4 ( 1 cement : coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( a ) foundations, footings, base or columns and mass concrete 21 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( b ) slabs, landing, shelves, balconis , lintels, beams, girders and cantilever upto floor two level. 22 providing and laying cement concrete work 1:2:4 ( 1 cement : coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( d ) columns, pillars posts and struts upto floor two level. 23 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( e ) staircases excluding landing upto floor two level 24 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( k ) vertical and horizontial its upto floor two level. 25 providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) for reinforced concrete chhajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 ( 1 cement, 3 fine sand ) to give a smooth and even surface centering and formwork and curing complete excluding cost of reinforcement. 26 providing is mark tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level 27 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( iii ) slabs having more than 10 cm and upto 13 cm. thickness 28 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( iv ) slabs having more than 13 cm and upto 15 cm.thickness 29 providing and laying controlled cement concrete m.150 and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( iii ) slabs having more than 10 cm and upto 13 cm. thickness 30 providing and laying controlled cement concrete m.150 and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( iv ) slabs having more than 13 cm and upto 15 cm.thickness 31 providing and laying ordinary cement concrete 1:2:4 ( 1 cement coarse sand : 4 graded stone aggregates 20 mm nominal size ) for r.c.c lintel including finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement. 32 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( a ) beams : ( i ) having cross sectional area 0.05 to 0.08 sq.m 33 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( a ) beams : ( ii ) having cross sectional area more than 0.08sq.m and upto 0.12 sq.m 34 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( a ) beams : ( iii ) having cross sectional area more than 0.12sq.m and upto 0.18 sq.m 35 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( b ) columns: ( i ) having cross sectional area 0.05 to 0.08 sq.m 36 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( b ) columns: ( ii ) having cross sectional area more than 0.08 sq.m and upto 0.12 sq.m 37 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( b ) columns: ( iii ) having cross sectional area more than 0.12sq.m and upto 0.18 sq.m 38 brick work using common burnt clay building bricks having crushing strength not less than 35 kg. / sq.cm. in foundation and plinth in cement mortar 1:5. ( 1 cement : 5 fine sand ) ( b ) conventional 39 brick work using common burnt clay building bricks having crushing strength not less than 35 kg. / sq.cm. in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 fine sand ) ( b ) conventional 40 brick work using common burnt clay building bricks having crushing strength not less than 35 kg. / sq.cm. in foundation and plinth in cement mortar 1:8 ( 1 cement : 8 fine sand ) ( b ) conventional 41 extra for brick work in superstructure above plinth level upto floor two level ( b ) conventional 42 extra for brick work in superstructure above floor two level item no. 1 ( 6.12 ) ( b ) conventional 43 extra for brick work in superstructure above floor two level item no. 2 ( 6.13 ) ( b ) conventional 44 extra for brick work in superstructure above floor two level item no. 3 ( b ) conventional 45 extra for brick work in superstructure above floor two level item no. 4 ( b ) coventional 46 ( i ) half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg / sq.cm. in cement mortar 1:4 ( 1 cement : 4 coarse sand ) in foundation and plinth ( b ) conventional 47 ( ii ) half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg / sq.cm. in cement mortar 1:5 ( 1 cement : 5 coarse sand ) in foundation and plinth ( b ) conventional 48 ( iii ) half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg / sq.cm. in lime mortar 1:1.5 ( 1 lime : 1.5 coarse sand ) in foundation and plinth ( b ) conventional 49 half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg / sq.cm. in cement mortar 1:3 ( 1 cement : 3 coarse sand ) with 2 nos of 6mm mild steel round bars after every three course embedded in cement mortar in foundation and plinth ( b ) conventional 50 extra for half brick masonry in superstructure above plinth level upto floor two level. ( b ) conventional 51 extra for half brick masonry in superstructure above floor two level. ( b ) conventional 52 providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( a ) foundations footings bases of columns etc. and mass concrete. 53 providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( b ) flat surfaces such as soffits of supspened floors slabs landings and the like. ( 1 ) floors etc. upto 200 mm in thickness. 54 providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( g ) columns pillarsposts and struts. ( 1 ) square rectangular polygonal in plan. 55 providing wood work in frames of doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. ( a ) indian teak wood 56 providing wood work in trusses, purling, rafter, post, post plates, wall plates and the like wrought framed, hoisted and fixed in position 57 providing wood work in frames of false ceiling, partitions etc sawn and put up in position. ( a ) indian teak wood 58 providing and fixing 35 mm thick shutters for doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood ( 1 ) fully panelled 59 providing and fixing 35 mm thick shutters for doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood ( ii ) fully glazed. 60 providing and fixing 35 mm thick shutters for doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood ( iii ) partly panelled and partly glazed. 61 providing and fixing 35 mm thick shutters for doors, windows and clearstory windows including blackenamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( i ) fully panelled. 62 providing and fixing 35 mm thick shutters for doors, windows and clearstory windows including blackenamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( ii ) fully glazed. 63 providing and fixing 35 mm thick shutters for doors, windows and clearstory windows including blackenamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( iii ) partly panelled and partly glazed. 64 providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood. ( i ) fully panelled. .65 providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood. ( ii ) fully glazed. 66 providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood. ( iii ) partly panelled and partly glazed. 67 providing and fixing 25 mm thick shutters for cupboards etc. including black enamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( i ) fully panelled. 68 providing and fixing 25 mm thick shutters for cupboards etc. including black enamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( ii ) fully glazed. 69 providing and fixing 25 mm thick shutters for cupboards etc. including black enamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( iii ) partly panelled and partly glazed. 70 add extra for providing and fixing 40 mm thick shutters instead of 35 mm thick shutters. 71 providing and fixing 35 mm thick panelled , glazed or panelled and glazed shutters, for doors windows and clearstory windows including anodised alluminium but hinges with necessary screws and indian teak wood shutters with. ( a ) plywood sheet panels. 72 providing and fixing 35 mm thick panelled , glazed or panelled and glazed shutters, for doors windows and clearstory windows including black enamelled m.s. but hinges with necessary screws. ( a ) plywood sheet panels. 73 provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. ( b ) non decorative type and block board core anodised alluminium butt hinges in flush door shutters ( 2 ) 35 mm thick. 74 providing and fixing 30 mm wire gauge shutters using galvanised m.s. wire of i.s. gauge designation of 85 g. with wire of 0.56 mm dia, for doors, windows and clearstory windows including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood. 75 providing and fixing 30 mm wire gauge shutters using galvanised m.s. wire of i.s. gauge designation of 85 g. with wire of 0.56 mm dia, for doors, windows and clearstory windows including bright finished or / and black enamellede m.s. butt hinges with necessary mango wood or equivalent quality. 76 providing and fixing 12 mm thick and 100mm wide pelmet of flat pressed 3 layer neneed particle board solid core with 25 mm diametre alluminium curtain road and brackets including fixing with 25mm x 3mm m.s flat 10cm, long and plugs etc.complete. 77 providing and fixing 40mm panelled, glazed or panelled and glazed partitions fixed to frames with iron scews etc. complete with indian teak wood ( frames tobe paid separately ) 78 providing and fixing decorative plywood 4mm thick in partitions including fixing to frames with screws etc, complete with 50mm x 12mm teak wood beading ( frames tobe paid separately ) 79 providing and fixing plain asbestos cement sheet 6mm thick in partitions including fixing to fames with screws etc, complete with 50mm x 12mm deodar wood beading ( frames tobe paid separately ) 80 providing and fixing in partitions 4mm thick medium hard board of approved quality including fixing to fames with screws etc, complete with 50mm x 12mm teak wood beading ( frames tobe paid separately ) 81 25 mm thick wooden shelves supported on 40 x 40mm x 6 mm t or l iron brackets fixed at suitable distances but not exceeding 75 cm. apart with mango wood or equivalent quality. 82 40 mm thick wooden shelves supported on 40 x 40mm x 6 mm or l iron brackets fixed at suitable distances not exceeding 75 cm. apart with mango wood or equivalent quality. 83 providing and fixing m.s. round or square bars with m.s.flats required spacing in wooden frames of windows and clerestory windows. 84 providing and fixing m.s. grills of required pattern to wooden frames of windows etc. with m.s. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws ( a ) plain grill. 85 providing and fixing m.s. grills of required pattern to wooden frames of windows etc. with m.s. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. ( b ) ornamental grill 86 providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or weight not less than 7.75 kg. per sq.m. to window frames etc. including 60 x 20mm beading of teak wood. 87 providing and fixing fly proof galvanised m.s. wire gauge of i.s. gauge designation 85 g. with wire of dia.0.56 mm to windows and celevating windows including 60 x 20mm beading of teak wood. 88 providing and fixing first class indian teak wood 75mm x 60mm moulded hand rails in straight lengths complete. 89 ( ii ) providing and fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including coats of oil painting to wood work etc.complete. with wooden louvers plank 12mm thick 90 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of painting etc, complete. ( i ) fully glazed. 91 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of painting etc, complete. ( ii ) fully panelled. 92 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of painting etc, complete. ( iii ) partly panelled and partly glazed. 93 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x cm. size including black enamelled iron oxidixed fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( i ) fully glazed. 94 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x cm. size including black enamelled iron oxidixed fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( ii ) fully panelled. 95 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x cm. size including black enamelled iron oxidixed fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( iii ) partly panelled and partly glazed. 96 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 12 cm x cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of painting etc, complete. ( i ) fully glazed. 97 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 12 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( ii ) fully panelled. 98 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 12 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( iii ) partly panelled and partly glazed. 99 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 12 cm x 7 cm. size including black enamelled iron oxidized fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( i ) fully glazed. 100 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 12 cm x 7 cm. size including black enamelled iron oxidized fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( ii ) fully panelled. 101 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 12 cm x 7 cm. size including black enamelled iron oxidized fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( iii ) partly panelled and partly glazed. 102 providing and fixing frp frame size 125x65 mm and 35mm thick frp shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in gel coat finish. the core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. the whole frp frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid / alkali. rates are to be inclusive of s.s hinges with fastener sleeve & alluminium fixtures & fastenings. 103 supply of 35mm thick fiber glass shutter with 1.5 to 2.0 mm thick fire retardent grade frp skin in wood grain rasied panel design having extra reinforcement on sides & edges & in polish design finish. the core of the shutter is to be filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. the whole shutter is to be water proof , weather proof, termite proof & resistance to mild acid / alkali. rates are to be inclusive of s.s hinges with necessary screws & alluminium s.s finish fixtures & fastenings. 104 steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. ( a ) in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like 105 steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. ( d ) in trussses and trussed purlins, upto 25 m. span and 15 m. ovarall height. 106 providing and fixing in position callapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of t_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat of read lead paint. 107 providing and fixing 1mm thick m.s. sheet sliding shutters with frame and diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm m.s. gusset plates at junctions and corners 25 mm dia. pulley, 40 x 40 x 6mm angle and t iron huide rail at top and bottom respactively with handles, stoppers and locking agangement etc, including applying a priming coat of red lead paint. 108 providing and fixing rolling shutters of approved make made of 80 mm wide m.s. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with push pull operation including the cost of hood cover and spring etc. complete. ( a ) shutters having width below 3.5 m. 109 providing and fixing rolling shutters of approved make made of 80 mm wide m.s. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with push pull operation including the cost of hood cover and spring etc. complete. ( b ) shutters having width 3.5 m. and above 110 providing and fixing rolling shutters of approved make made of 80 mm wide m.s. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push pull operation complete but excluding the cost of hood cover and spring. ( b ) shutters havind width above 3.5 m. 111 providing and fixing extruded aluminum window having extruded aluminum colour anodized section frame main outer size 127mm x 38.10mm x 1.35mm ( of jindal section no:2443, @ wt.1.384 kg / mt ) , horizontal four track member size 122.20mm x 31.75mm 1.10mm ( of jindal section no:8787, @ wt. 1.205 kg / mt ) , vertical member of size 122.20mm x 31.75mm x 1.50mm ( of jindal section no:8935, @ wt. 1.398 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 112 providing and fixing window having extruded aluminum colour anodized section frame main outer size 95mm x 24mm x 1.17mm ( of jindal section no:2459 @ wt.of 0.738 kg / mt ) , horizontal three track member size 92mm x 31.75mm x 1.30mm ( of jindal section no:8688, @ wt.1.07 kg / mt ) , vertical member of size 92mm 31.75mm x 1.50mm ( of jindal section no:8933, @ wt. 1.06 kg / mt ) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm ( of jindal section no:8947@ wt.of 0.456 kg / mt ) , vertical member of size 40mm x 18mm x 1.29 mm ( of jindal section no:8949 @ wt.of 0.456kg / mt / with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc 113 providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094 kg / rmt ) , horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm ( of jindal section no: 8687 @ wt.of 0.695 kg / mt ) , vertical member of size 61.85 mm x 31.75mm x 1.30 mm ( of jindal section no:8758 @ wt.of 0.0.659 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 114 providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094kg / rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window 115 providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094kg / rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for fix window. 116 providing and fixing extruded aluminum window having extruded aluminum colour powder coated section frame main outer size 127mm x 38.10mm x 1.35mm ( of jindal section no:2443, @ wt.1.384 kg / mt ) , horizontal four track member size 122.20mm x 31.75mm x 1.10mm ( of jindal section no:8787, @ wt. 1.205 kg / mt ) , vertical member of size 122.20mm x 31.75mm x 1.50mm ( of jindal section no:8935, @ wt. 1.398 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 117 providing and fixing window having extruded aluminum colour powder coated section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094 kg / rmt ) , horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm ( of jindal section no: 8687 @ wt.of 0.695 kg / mt ) , vertical member of size 61.85 mm x 31.75mm x 1.30 mm ( of jindal section no:8758 @ wt.of 0.0.659 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 118 providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094kg / rmt with colour powder coated alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window 119 providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094kg / rmt with colour powder coated alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for fix window. 120 providing and fixing sheet glass, selected quality ( type c ) bedded in putty and fixed with wooden beading including the cost wooden beadings of first class teakwood and necessary cutting glass. ( 1 ) 5 mm thick. 121 providing and fixing sheet glass, selected quality ( type c ) bedded in putty and fixed with wooden beading including the cost wooden beadings of first class teakwood and necessary cutting glass. ( 2 ) 6 mm thick. 122 providing and fixing rough cast wired glass, 6mm thick bedded putty and fixed with wooden beading including the cost of wooden beadings of indian teak wood and necessary cutting of glass. ( c ) wired figured glass 123 providing and fixing sheet glass ordinary quality bedded in putty and fixed with wooden beadings including the cost of wooden beadings of first class teak wood and necessary cutting of glass. ( 4 ) 4mm thick 124 providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with flush pointing white cement. 125 providing and laying ceramic tiles 8mm thick in flooring treads steps and landing laid on a bed of 12mm thick cement mortar 1: ( 1 cement : 3 coarse sand ) finishing with flush pointing in white cement. 126 providing and laying marbo grenite tiles 8 to 10 mm thick , 36 36 in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with flush pointing in white cement. 127 providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 ( 1 cement : coarse sand ) and jointed with white cement slurry 128 providing and layingmarbo grenite tiles 8 to 10 mm thick , 24 24 in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) and jointed with white cement slurry 129 providing and laying marbo grenite tiles 8 to 10 mm thick , skrting risers of steps and dedo on 10mm thick cement plaster 1: ( 1 cement : 3 coarse sand ) and jointed with white cement slurry 130 providing and laying marble stone slab flooring over 20mm ( average ) base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) l.m. 1:1.5 ( 1 lime putty : 1.5 coarse sand ) laid and jointed with gray cement slurry including rubbing and polishing complete. ( marble slab 25mm thick 131 providing and laying polished kota stone slab flooring over 20mm ( average ) thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) or l.m. 1.1.5 ( 1 lime putty :1.5 coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. ( 25mm thick 132 providing and laying polished kota stone slab 25mm thick in risers of steps, skirting dedo and pillars laid on 10mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. 133 providing and laying rough chiseled dressed stone flooring over 20mm average thick base of cement mortar 1:5 ( 1 cement : coarse sand ) or l.m. 1:1.5 ( 1 lime putty : 1.5 coarse sand ) including pointing with cement mortar 1:2 ( 1 cement : 2 stone dust ) etc. complete. ( a ) 25mm thick 134 providing and laying cement concrete flooring 1:2:4 ( 1 cement : coarse sand : 4 graded stone aggregate 20mm nominal size ) laid in one layer and finished with a floating coat of neat cement. ( 50mm thick. 135 providing and laying cement concrete pavement ( 25mm to 50mm thick ) with 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 20mm nominal size ) including finishing with floating coat of neat cement complete. 136 p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for dark shade 137 p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit 138 p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade 139 providing and fixing pre cast concrete kerb stone of gray cement based concrete block 30cm length, 30cm height and 15cm thick of m250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with c:m 1:3 ( 1cement:3fine sand ) etc complete. 140 providing and fixing pre cast concrete kerb stone of gray cement based concrete block 30cm length, 30cm height and 15cm thick of m250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with c:m 1:3 ( 1cement:3fine sand ) etc complete. 141 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m300 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc complete. 142 providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall, clearing with water and oxalic acid etc. as directed. 143 providing and laying coloured glazed tiles of the size 300 mm 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) & jointed with white cement slurry. 144 providing corrugated g.i. sheet of class 3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses. ( 1 ) 0.80 mm thick sheet. 145 providing ridges or hips 600 mm overall in plain g.i. sheet class 3 fixed with g.i.j. or l hooks and nuts 8mm dia g.i. limpet and bitumen washer complete. ( 1 ) 0.80 mm thick sheet. 146 providing valleys 900mm overall in plain 1.6mm thick g.i. sheet fixed with g.i. j or l hooks, bolts and nuts glavanised iron j or l hooks bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 147 providing and fixing 150mm wide 450mm over all semicircular plain g.i.sheet class 3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including making necessary connection with rain water pipes. ( i ) 0.80 mm thick sheet. 148 providing and fixing 6 mm thick lexan polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by engineer in charge. 149 providing and playwood lining with but jointed and nails ( frame work and cover fillets to be measured and paid for separately ) ( i ) 6mm thick ply. 150 providing and playwood lining with but jointed and nails ( frame work and cover fillets to be measured and paid for separately ) ( ii ) 9mm thick ply. 151 providing and fixing eco friendly light weight calcium silicate false ceiling tiles having tegular edge & 15 mm thick densified edges on the tile periphery for extra strength the light weight calcium silicate ceiling tiles shall have, light reflection 85% noncombustible as per b.s. 476 part iv, 100% humidity resistance and also having thermal conductivity 0.043° w / m kc. for the best thermal insulation. the light weight calcium silicate tile shall be of approved texture fine fissured / spintone / cosmos having nrc value of 0.5 & globe having nrc value of 0.75 nrc or equivalent of size 595 x 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections ( galvanizing @120 grams per sqm including both side ) consisting of main ‘t’ runner suitably spaced at joints to get required length and size of 24x38mm made from 0.30 mm thick ( minimum ) sheet, 1200mm centre to centre, and cross ‘t’ of size 24x28mm made out of 0.33mm ( minimum ) sheet spaced 1200mm along spaced between main ‘t’ at 600mm centre to centre to form agrid of 1200x600mm and secondary cross ’t’ of length 600mm and size 24x28mm made of 0.30 mm thick ( minimum ) sheet to be interlocked at middle of the 1200x600mm panel to form grid of 152 providing and fixing single layer waterproof gypusm board 12.5 mm thick of the make newgood group co. ltd. or equivalent & newgood group co. ltd. company sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm suspended by g. suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimetre chanel a of size 20 mm x 27 mm 30 mm x 0.50 mm at edges & drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for light fitting, diffuser etc. complete as per detail drawing as directed. 153 providing 10mm thick cement plaster in single coat on brick / concrete walls for interior plastering upto floor two level and finished even and smooth in ( i ) cement mortar 1:3 ( 1 cement:3 sand ) 154 providing 10mm thick cement plaster in single coat on brick / concrete walls for interior plastering upto floor two level and finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement :4 sand ) 155 providing 15mm thick cement plaster in single coat on rough ( similar ) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( i ) cement mortar 1:3 ( 1 cement:3 sand ) 156 providing 15mm thick cement plaster in single coat on rough ( similar ) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement :4 sand ) 157 providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( i ) cement mortar 1:3 ( 1 cement:3 sand ) 158 providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement :4 sand ) 159 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of c.m. 1:3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of c.m. 1:1 ( 1 cement : 1 sand ) etc. complete. 160 providing cement vata ( 10cm. x 10 cm. size ) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. 161 providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar ( 1 cement : 4 coarse sand ) in rough finishing and 8 mm thick top coat of cement mortar 1:2 ( 1 cement : 2 coarse sand ) finished with trovel including scaffolding curing etc. complete. 162 white washing with lime on wall surface ( two coats ) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter. 163 extra over items 11 to 12 for every subsequent coat of white washing with lime on wall surface. 164 colour washing with lime on wall surface ( two coats ) over and including a primary coat of white washing to give an even shade after through brooming the surface to remove all dirt, dust, mortar drops and other foreigh matter. 165 cement washing with portland cement slurry on wall surface ( one coat ) to give a smooth finish including thoroughly broomings the surface to remove all dirt, mortar drops and other foreign brand. 166 removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. 167 distempeing ( two coats ) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. 168 finishing wall with water proofing cement paint of on wall surfaces ( two coats ) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. 169 extra over item 51 for every subsequent coat of water proofing cement paint of approved brand and manufacture. 170 wall painting ( two coats ) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 171 extra over item 57 for every subsequent coat of wall painting with plastic emulsion pain of approved brand. 172 applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 173 painting two coats ( excluding priming coat ) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. 174 painting one coats ( excluding priming coat ) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 175 extra over item 7 and 11 for every subsequent coat of paint 176 painting two coats ( excluding priming coat ) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 177 appliying priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. ( c ) ready mixed paint brushing priming for enamel 178 extra over item 59 for every subsequent coat of priming coat. ( b ) ready mixed paint brushing wood primier pink. 179 painting two coats ( excluding priming coat ) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. 180 varnishing two coats ( excluding priming coat ) on new wood and wood based surface under coating with flatting varnish and finished coat with varnish to give an even surface including cleaning the surface of all dirt, dust and sand papering so as to produce a smooth dry surface. 181 polishing with french polish on new wood and wood based surface to give an even surface including cleaning, the surface of all dirt, dust and sand papering smooth and including a coat of wood filler. 182 appliying wax polish on new wood and wood surface with bees wax polish in proportion of 2:1.5 :1:0.5 ( 2 bees wax : 1.5 linseed oil : 1 turpentine even surface including cleaning the surface of all dirt dust and sand papered smooth. 183 writing letter or figures on any surface with black japan paint ( stops, comas, hyphens and the like not to be measured and paid for separately ) ( i ) block ( letters / figures ) ( per 10 letter pet cm.ht ) 184 writing letter or figures on any surface with black japan paint ( stops, comas, hyphens and the like not to be measured and paid for separately ) ( ii ) indian ( letters / figures ) 185 painting lines, deashes, arrows, letters etc on roads, air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. ( i ) over 10cm in width 186 painting lines, deashes, arrows, letters etc on roads, air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. ( ii ) upto 10 cm in width 187 painting lines, deashes, arrows, letters etc on roads, air fields and like in one coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. ( i ) over 10cm in width 188 finishing wall with weather proof exterior emulsion paint on wall surface ( two coats ) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 189 applying two coats of birla ( white cement based ) or asian ( acrylic lapy putty ) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 190 demolition and disposal of unserviceable materials with all lead and lift. ( i ) lime concrete. 191 demolition and disposal of unserviceable materials with all lead and lift. ( i ) cement concrete. 192 demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) r.c.c. work 193 demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) in lime mortar. 194 demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( ii ) in cement mortar. 195 dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 196 dismentaling of wooden floors including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 197 dismentaling of sheet roofing including ridges, hips, valleys, gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) g.i.sheet roofing. 198 dismentaling of sheet roofing including ridges, hips, valleys, gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( ii ) a.c. sheet roofing. 199 dismentalings manglore of country tile roofing with battens boarding etc. including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( ii ) a.c. sheet roofing. 200 dismentalings cement asbestos hard board in ceiling or partition walls, wooden trellies work including trellies work including frames , stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 201 dismentling wood work, wrought framed and fixed in frames trusses including stacking the materials with all lead and lift. 202 dismentling expanded metal or i.r.c fabric with necessary battens and beadings including frame work, and stacking the serviceable materials with all lead and lift. 203 dismentling doors, windows, ventilators etc. ( wood or steel ) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. ( i ) not exceeding 3 sq.m. in area. 204 dismentling doors, windows, ventilators etc. ( wood or steel ) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. ( ii ) exceeding 3 sq.m. in area. 205 dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts including all earth work concrete in base and making good the disturbed ground stacking useful materials as directed and disposing as directed and disposing of the unserviceable materials with all lead and lift. 206 dismentling c.i. pipes g.s.w.pipes abd a.c. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of pipe ) 207 dismantling santtary fittings like wash basin . w.c. pan indian and european type, flushing tank etc. including stacking the materials with all lead and lift. 208 scraping oil paint from steel and other metal surface and making the surface even ( with hand scraping. ) 209 removing and scraping of old deteriorated plaster of any thickness fromm wall / r.c.c member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift 210 cutting out cracks of roof terrace to v section, cleaning out, wetting, grouting with cement and sand slurry 1:3 ( 1 cement : 3 sand ) 211 cutting out cracks roof terrace to v section cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand ( 1:1 by weight ) 212 providing and fixing 1.20 metre high fencing with 2.0 metre long m.s. angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 mt, c / c. with five horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 kg. per 100 metre, strained and fixed to posts with g.i, staples including fixing the postsin ground with 0.5 m x 0.5.m x 0.5 m. block in c.c1:5:10 etc complete. 213 construction of b, b, masonery paniyara 23cm. x 75cm. wall and 15cm x 15cm curbing including fixing precast r.c.c. arble mosaic ( terrazo ) slab of 75mm thickness on top and smooth finishing in cement plaster in c.m. 1:3 curing etc. complete including drainage out waste water arrangements. 214 constructing a sink ( chowkedi ) with c.c. 1:2:4, 12cm. thick over b.b. masonry in c.m, ( 1:6 ) in front and dwarf wall 1.0 mt.high and 23 cm.thick cement plaster to masonry / in c.m.1:3 ) and cement concrete flooring in 1:2:4: mi x 5 cm. dia. drain pipe etc.complete. 215 constructing a cooking platform 60 cm. width and 70 cm high resting on b.b.masonry walls 23 cm.thick in c.m. ( 1:6 ) with ( ii ) fixing black kadappa stone 30mm thick laid on precast r.c.c. ( 1:2:4 ) slab with plastering on exposed faces of wall in c.m. ( 1:4 ) etc complete. 216 carring out timber treatment to all wood work including drilling holes and spraying oil based chemical solution on surface of timber work for termite control including labour and material etc. complete. using chlordene 20 ec. as per 6113_part iii consentration weight 1.00 percent is recommended one litre chemical emulsion dillute with 9 liter of kerosene precent concentration. total dillute concrentration will be 10 litre inclusive of the litre chemical emulsion appication 0.75 / litre chemical per one sqmt printed two coat wood surface. 217 applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. using heptachloride 20 ec. as per 6113_pests consentration weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of water will give. total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 litre chemical / sqm of surface is recommended as per i.s 218 providing and laying bilimora type brick facing in c.m. 1:1 laid over bedding of cement mortar 1:3 ( 20mm thickness ) including clearing watering scaffolding etc. complete. 219 providing and fixing teak wook rail of 60mm x 20mm size and 50cm. length including 3 coats of oil paint to wood work with set of 3 pags. 220 providing erecting and fixing double coated syntex pvc. ( isi ) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. 221 providing and fixing to wall, ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. ( a ) 15mm 222 providing and fixing to wall, ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. ( b ) 20mm 223 providing and fixing to wall, ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. ( c ) 25mm 224 providing and fixing to wall, ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. ( d ) 32mm 225 providing and fixing to wall, ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. ( e ) 40mm 226 providing and fixing to wall, ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. ( f ) 50mm 227 providing and laying in trenches galvanised mild steel tubes ( midium grade ) of the following nominal bore, and tube fitting ( earthwork in trenches to be measured and paid for separately ) ( a ) 15mm 228 providing and laying in trenches galvanised mild steel tubes ( midium grade ) of the following nominal bore, and tube fitting ( earthwork in trenches to be measured and paid for separately ) ( b ) 20mm 229 providing and laying in trenches galvanised mild steel tubes ( midium grade ) of the following nominal bore, and tube fitting ( earthwork in trenches to be measured and paid for separately ) ( c ) 25mm 230 providing and laying in trenches galvanised mild steel tubes ( midium grade ) of the following nominal bore, and tube fitting ( earthwork in trenches to be measured and paid for separately ) ( d ) 40mm 231 providing and laying in trenches galvanised mild steel tubes ( midium grade ) of the following nominal bore, and tube fitting ( earthwork in trenches to be measured and paid for separately ) ( e ) 65mm 232 providing and laying in trenches galvanised mild steel tubes ( midium grade ) of the following nominal bore, and tube fitting ( earthwork in trenches to be measured and paid for separately ) ( h ) 80mm 233 making connection of galvanised mild steel distribution branch with galvanised mild steel main 50mm to 80mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. 234 providing and fixing to wall ceiling and floor 6.0 kg. f / cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor. ( a ) 20mm 235 providing and fixing to wall ceiling and floor 6.0 kg. f / cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor. ( b ) 25mm 236 providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following nominal size. ( b ) 75mm dia. 237 providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following nominal size. ( c ) 100mm dia. 238 providing and fixing cast iron ( spun ) nahni trap of the following nominal diameter of self cleaning design with c.i. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. ( c ) 100mm dia. 239 providing and fixing water closet squatting pan ( indian type w.c. pan ) size 580mm ( earthwork, bed concrete, foot reste and trap to be measured and paid for separately ) ( a ) vitreous china. ( i ) long pattern = white colour 240 providing and fixing wsh down water closet ( european type, w.c. pan ) with integral p or s trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement : 1 fine sand ) ( seal and cover to be measured and paid for separately ) ( a ) vitreous china pattern : ( i ) in white colour 241 providing and fixing 100mm size p or s trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1 cement : 1 fine sand ) ( a ) vitreous china. 242 providing and fixing 12.5 litres low level flushing cistern with a pair, of c.i. or mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, c.p brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately ) ( a ) vitreous china ( i ) in white colour 243 providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors. 244 providing and fixing plastic seat and cover for wash down water closer with c.p. brass hinges and rubber buffers. ( b ) black plastic seal and cover. 245 providing and fixing washbasin with single hole for pillar tap with c.i. or m.s. brackets painted white including sutting holes and making good the same but excluding fittings. ( a ) vitreous china: ( ii ) flat back washbasin 550 mm x v 400mm size. ( i ) in white colour. 246 providing and fixing kitchen sink with c.i. or m.s. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. ( c ) vitreous china sink. ( i ) 600mm x 450mm x 150mm size 247 providing and fixing c.p. brass shower rose with 15mm or 20mm inlet. ( a ) 100mm dia. each 248 providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick a.c. sheet or plywood sheet and fixing to wooden pluge with c.p. brass screws and washers. 249 providing and fixing c.p. brass towel rail comlete with c.p. brass brackets fixed to wooden plugs with c.p. brass scews. ( b ) 600mm x 20mm size. 250 providing and fixing 600mm x 120mm glass shelf with c.p. brass bracket and guard rail complete mixed to wooden plug with c.p. brass screws. 251 providing and fixing toilet paper holder. ( a ) c.p. brass 252 providing and fixing screw down bib taps of following size. ( a ) brass screw down bib tap polished bright. ( i ) 15mm dia. 253 providing and fixing screw down bib taps of following size. ( a ) brass screw down bib tap polished bright. ( ii ) 20mm dia. 254 providing and fixing screw down bib taps of following size. ( b ) brass chromium plated screws down bib tap. ( i ) 15mm dia. 255 providing and fixing screw down bib taps of following size. ( b ) brass chromium plated screws down bib tap. ( ii ) 20mm dia. 256 providing and fixing screw down bib taps of following size. ( c ) gun metal screw down bib tap. ( i ) 15mm dia. 257 providing and fixing screw down bib taps of following size. ( c ) gun metal screw down bib tap. ( ii ) 20mm dia. 258 providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. ( i ) 15mm dia. 259 providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. ( ii ) 20mm dia. 260 providing and fixing brass screw down stop tap. ( a ) 15mm dia. 261 providing and fixing gun metal check or non return fullway wheel valve. ( c ) 25mm dia. 262 providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete. ( ii ) 25mm dia. 263 providing and fixing urinal or approved quality including conecting the urinal with waste pipe , tap etc. complete. ( a ) white earthenware flat back or corner type size 430mm x 260mm x 350mm. 264 providing and fixing urinal of approved quality including connection with trap and with integral longitudinal flush pipe. ( a ) squating plate pattern white earthenware 550mm x 300mm. 265 providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin. 266 providing and fixing ball cock of approved. quality as directed. ( a ) copper metal ( i ) 25mm dia. 267 providing and fixing ball cock of approved. quality as directed. ( b ) abonite ( i ) 25mm dia. 268 providing and fixing c.i. manhole cover 0.60 m. x 0.45m. size having weight not less than 35kg. 269 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ a ] 15 mm. 270 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ b ] 20 mm. 271 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ c ] 25 mm. 272 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ d ] 32mm. 273 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ e ] 40mm. 274 providing laying and jointing in true line and level 15mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 275 providing laying and jointing in true line and level 25mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 276 providing, laying and jointing in true line and level 110 diametre u.p.v.c ( type b ) conforming to is 13592 1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735 1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. 277 providing and fixing pvc swr nahni trap is 14735 for drain 100 mm diameter with jali of the following nominal diameter of self cleansing design with c.i scread down or hinged grating including the cost of cutting and making good the walls. 278 providing and laying ( to level or slopes ) and jointing with stiff mixture of cement mortar in proportion 1:1 selt glazed stoneware pipes including testing of pipes and joints complete. ( b ) 150mm dia. 279 providing and laying cement concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of following internal diameters with necessary formwork and curing complete. ( b ) 150mm dia. ( 166mm ave. bed thickness ) 280 providing and fixing s.w. gully trap with c.i. grating brick masonry chamber and water tight c.i. cover with frame of 300mm x 300mm size ( inside ) with standard weight. ( i ) square mouth traps. ( a ) 100mm x 100mm size p type. 281 providing and fixing s.w. gully trap with c.i. grating brick masonry chamber and water tight c.i. cover with frame of 300mm x 300mm size ( inside ) with standard weight. ( i ) square mouth traps. ( b ) 150mm x 100mm size p or r type 282 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( c ) 250mm 283 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( d ) 300mm 284 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( e ) 450mm 285 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( h ) 900mm 286 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( m ) 1200mm 287 constructing manhole with r.c.c. top slab in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 + 50mm size ) inside plastering 15mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size ) finished smooth complete including curing and festing ( i ) inside size 900mm x 1200mm and 1.5m. deep including c.i. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. ( wt. of cover 64 kg. and wt. of frame 64 kg. ) ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 1 ) a type depth 0.90 metre for 150mm diameter sewer. 288 constructing manhole with r.c.c. top slab in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 + 50mm size ) inside plastering 15mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size ) finished smooth complete including curing and festing ( i ) inside size 900mm x 1200mm and 1.5m. deep including c.i. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. ( wt. of cover 64 kg. and wt. of frame 64 kg. ) ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 2 ) b type depth 1.50 metre for 150mm diameter sewer. 289 constructing manhole with r.c.c. top slab in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 + 50mm size ) inside plastering 15mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size ) finished smooth complete including curing and festing ( i ) inside size 900mm x 1200mm and 1.5m. deep including c.i. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. ( wt. of cover 64 kg. and wt. of frame 64 kg. ) ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 3 ) c type depth 2.25 metre for 150mm diameter sewer. 290 ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 4 ) d type depth 3.15 metre for 150mm diameter sewer. 291 supplying and fixing c.i. cover 300mm x 300mm without frame for gulley trap ( standard pattern ) te weight of cover to be not less 4.53 kg. ) 292 providing and erecting at the site of work steel ventilating column of 150m internal diameter and 12.20 metre high from g.l. to bottom of top grill including c.i. grill and base plate bolts and nuts etc. and excavation in foundation of size 120cm. x 120vcm. x 165cm. and filling the pit with first layer of cement concrete 1:3:6 mix ( 1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size ) of 120cm. x 120cm. x 90cm. and remaining pit with b.b.c. 1:3:6 mix ( 1 cement :3 coarse sand:6 brickbats 40+50mm size ) and providing fillet in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm. nominal size ) at g.l. and 3 coats of silver paint etc. complete. 293 constructing brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm c.i. horizontal grating wih frame complete. 294 constructing brick masonry road gully chamber 450mm x 450mm x 775mm with vertical gating complete. 295 constructing brick masonry road gully chamber 1100mm x 775mm including 500mm x 450mm ( c.i. horizontal grating with frame and vertical grating complete. ) 296 constructing brick masonry chamber for underground c.i. inspection chamber and bends with briocks having croshing strength not less than 35kg. cm2 in c.m. 1:5 c.i. cover with frame ( light duty ) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38kg. ( wt. of cover 23 kg. ) and wt. of frame 15kg. ) ( r.c.c. top slabe with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm size ) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( i ) inside dimensions 455mmx 610mm and 450mm deep for single pipe line. 297 constructing brick masonry chamber for underground c.i. inspection chamber and bends with briocks having croshing strength not less than 35kg. cm2 in c.m. 1:5 c.i. cover with frame ( light duty ) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38kg. ( wt. of cover 23 kg. ) and wt. of frame 15kg. ) ( r.c.c. top slabe with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm size ) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( ii ) inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets. 298 constructing brick masonry chamber for underground c.i. inspection chamber and bends with briocks having croshing strength not less than 35kg. cm2 in c.m. 1:5 c.i. cover with frame ( light duty ) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38kg. ( wt. of cover 23 kg. ) and wt. of frame 15kg. ) ( r.c.c. top slabe with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm size ) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( iii ) inside dimensions 600mm x mm and 450mm deep for pipe lines with three or more inlets. 299 ( b ) providing sock pit of 5.00 cu.m. volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in c.m. 1:3 with finishing curing etc. complete as directed. 300 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per is 458 1991 specifications including setting the pipes in c.m. 1:2 watering and laying ( to level or slopes ) of class np3 of following internal daimeters. ( v ) 900mm dia. ( upto 10 ton ) 301 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per is 458 1991 specifications including setting the pipes in c.m. 1:2 watering and laying ( to level or slopes ) of class np3 of following internal daimeters. ( iii ) 600mm dia. ( upto 10 ton ) 302 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per is 458 1991 specifications including setting the pipes in c.m. 1:2 watering and laying ( to level or slopes ) of class np3 of following internal daimeters. ( ii ) 450mm dia. ( upto 10 ton ) 303 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per is 458 1991 specifications including setting the pipes in c.m. 1:2 watering and laying ( to level or slopes ) of class np3 of following internal daimeters. ( i ) 300mm dia. ( upto 10 ton ) 304 supplying energy saving fluorecent tube fitting with electronic ballast 1 x 36 / 40 watt batten type cat iii 305 point wiring for indivisual plug with 2 1 0 sq.mm copper wire with 6a modulartype accesaries ( a ) mini modular 306 supplying and errecting pvc casing & capping patti 32mm size 307 providing and erecting switch board for computer erected on wooden / pvc / metal board with laminated sheet erected 1no 6a / 16a universal plug switch combined with fuse & indicator 4nos 6a.tissino switch & 4nos tissino 5in plus 308 electric type cordless call bell ( effective range minimum 50 meter. 309 miniature circuit bracker mcb double pole 6a to 32a ( i ) cat iii 310 supplying flexible isi marked copper wires of following size ( i ) 1.50mm² 3 core round pvc sheathed 311 supplying flexible isi marked copper wires of following size ( i ) 2.50mm² 3 core round pvc sheathed 312 supplying flexible isi marked copper wires of following size ( i ) 4.00mm² 3 core round pvc sheathed 313 providing and fixing gypsom board false ceiling using standard g.i.supporting system laid in a grid of 600 mm × 450 mm as per the manufatures specification. the cost inclusive of filling all the joints with p.o.p to get an equivalent surface making all cl 314 supplying ceiling fan 1200mm sweep having 3 blades sets having omamental design shanks ( add rs. 100.0 extra for regulator ) 315 providing and fixing single layer waterproof gypusm board 8 mm thick of the make newgood group co. ltd. or equivalent newgood group co. ltd. company sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm suspended by g. suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimetre chanel a of size 20 mm x 27 mm 30 mm x 0.50 mm at edges & drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for light fitting, diffuser etc. complete as per detail drawing as directed. 316 providing and laying ordinary cement concrete 1:2:4 ( 1 cement : coarse sand :4 graded stone aggr. 20mm nominal size ) and curing etc. complete including the cost of formwork but excluding the cost of reinforcement for cornise for all heights. 317 providing m 200 controlled cement concrete road using trimix vaccum dewatering system with mixing conplast p 211 ( water reduction concrete admixture ) @ 100 ml per bag of cement with mixing of recon 3s fibers ( reliance product ) at 125 gms per bag of cement with providing and fixing & removing of c channel having 75 x 75 mm as per required level slope and thickness of concrete and leveling and finishing the concrete using surface vibrator, power floater and trowel light brooming on as directed including making expansion joint of size 20 x 200 mm & filling the expansion joint using colpar 200 as per manufactures specitions by cutting of joint using concrete cutter machine etc. complete. 318 providing and laying ordinary cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggr. 20mm nominal size ) with curing etc. complete including the cost of form work in coping and plinth protection. 319 providing and laying cement concrete 1:1:2 ( 1 cement : 1 coarse sand : 2 graded stone aggregate 200mm nominal size ) and curing complete including cost of formwork & excluding cost of reinforcement for reinforcement concrete work in ( a ) foundation, footing, base of column & mass concrete. 320 providing and laying cement concrete 1:1:2 ( 1 cement : 1 coarse sand : 2 graded stone aggregate 200mm nominal size ) and curing complete including cost of formwork & excluding cost of reinforcement for reinforcement concrete work in column, pillars, posts, strats upto floor two level. 321 providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregates 20 mm nominal size ) and curing complete including cost of form work and excluding cost of reinforcement for reinforced cement concrete work in plinth beam 322 providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregates 20 mm nominal size ) and curing complete including cost of form work and excluding cost of reinforcement for reinforced cement concrete work in rcc wall upto floor two level. 323 providing and laying controlled cement concrete 1:1:2 and curing complete excluding the cost of form work but excluding the cost of reinforcement for reinforced concrete work in ( a ) foundations, footings bases of columns and the like and mass concrete & pile work 324 providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregates 20 mm nominal size ) and curing complete including cost of form work and excluding cost of reinforcement for reinforced cement concrete work in column 325 providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregates 20 mm nominal size ) and curing complete including cost of form work and excluding cost of reinforcement for reinforced cement concrete work in slab 326 providing and fixing cup board with teakwood frame size 75mm x 25mm with 19mm thick termite proof commercial plywood isi mark quality including the cost of 1mm thick lamination sheet on outer side & 0.80mm thick lamination sheet on inside fixtures and fastenig and locking arrangment of approved quality including polishing to exposed surface etc. complete as per detailed drawing and instruction of engineer in charge. 327 providing and fixng decorative ceiling using 6mm e board self designing pattern of approved design with framing grid 50mm x 50mm of alluminium plain pipe of 40mm x 25mm x 1.00mm suspended ceiling with runners in lengthwise and widthwise with alluminium angle screw and making grooves in required pattern including anchoring and supported to purlins soffits as per required of cement and applying 2 ( two ) coats plastice emulsion paint to give and even shade of approved brand & decorative ceiling lights with all necessary matrials and labour etc. complete. 328 providing and fixing single shutter alluminium anodized openable window of frame 63mm x 25mm x 1.00mm size having top & vertical shutters of size 38 x 18 x 1.50mm & bottom shutter of size 50 x 18 x 1.50mm including using glazing patta, glazing clip, rubber gasket, locking arrangement, handles with 5mm thick plain glass etc. complete. 329 renovation for existing 35mm thick teak wood paneled shutter using 6mm thick commercial plywood on both side and fixing approved laminated on both side with all labour and material including fixtures and fastening of best quality etc. complete. 330 providing and fixing anodised alluminium partition for cabin with 63.5mm x 38mm x 1.5mm ( door shutter should be paid seperately ) and fixing 9mm thick prelaminated nova board & 5mm thick modi guard plain glass incluidng providing and fixing glazing clip, hathi rubber including cost of labour etc. complete as directed. 331 providing and fixing only alluminium door shutters in new partition with shutter frame, vertical & top members @ size 47.62mm x 44.45mm x 1.38mm & middle member @ size 49.91mm x 44.45mm x 1.24mm and bottom members @ size 114.30mm x 44.45mm x 1.20mm having standard weight with 5mm thick selected quality ( modi guard ) plain glass and 9mm thick prelaminated nova board ( bison panel ) with necessary door closer, door lock and fixtures & fastenings including rubber bedding clips etc. complete as directed. 332 providing and fixing extruded aluminum window having extruded aluminum colour anodized section frame main horizontal four track member size 122.20mm x 31.75mm x 1.10mm ( of jindal section no:8787, @ wt. 1.205 kg / mt ) , vertical member of size 122.20mm x 31.75mm x 1.50mm ( of jindal section no:8935, @ wt. 1.398 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 333 providing and fixing window having extruded aluminum colour anodized section frame main horizontal three track member size 92mm x 31.75mm x 1.30mm ( of jindal section no:8688, @ wt.1.07 kg / mt ) , vertical member of size 92mm x 31.75mm x 1.50mm ( of jindal section no:8933, @ wt. 1.06 kg / mt ) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm ( of jindal section no:8947@ wt.of 0.456 kg / mt ) , vertical member of size 40mm x 18mm x 1.29 mm ( of jindal section no:8949 @ wt.of 0.456kg / mt / with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc 334 providing and fixing window having extruded aluminum colour anodized section frame main horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm ( of jindal section no: 8687 @ wt.of 0.695 kg / mt ) , vertical member of size 61.85 mm x 31.75mm x 1.30 mm ( of jindal section no:8758 @ wt.of 0.0.659 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 335 providing and fixing colour anodized alluminium blade strip frame for ventilation with 5 mm thick frosted glass louvers as details etc complete for ventilation 336 providing and making m.s. door frame of size 40mm x 40mm x 5mm & shutter size with 30mm x 30mm x 5mm including 1.80mm thick 16 guage m.s. plate with neccessary welding, cutting, fixing, holdfast & oil paint etc. complete. 337 providing frp sheets roofing ( 1.5mm thick ) fixed with galvanised iron j or l hooks bolts and nuts 8 mm diameter with bitumen and g.i. limpet washeres, filled with white lead complete excluding the cost of purlins rafters and trusses ( 1 ) 1.50 mm thick sheet. 338 providing and laying 1.20 mt. wide plinth protection with excavatior for foundation up to 0.25 mt depth and 0.35 mt. width and c.c. 1:5:10 brick work in c.m. 1:6 and finished wall with 10mm thicks cement plaster in c.m. 1:4 to brick masonary including chequred tiles flooring, sand filling etc. complete as directed. 339 providing and laying water proofing treatment on terrace including cleaning the surface by wire brush as directed including applying neat cement slurry @ 2.75 kg / sq.smt. mixed with water proofing compound after cleaning the surface, laying cement concrete using brickbats 25 to 100mm size well immersed in water with 50% of cement mortar 1:5 ( 1 cement :5 coarse sabd ) mixed with water proofing compound over 20mm thick layers of cement mortar 1:5 ( 1 cement :5 sand ) to required slope including rounding of junctions of walls and slabs and after two days of proper curing, applying second coat of cement slurry finishing the surface with rate 20mm thick cement mortar 1:4 and china mosaic tiles and finally finishing the surface with white cement slurry and after finishing the whole terrace shall be flooded with water for a period of two weeks. 340 providing and laying water proofing treatment by conventional method including cleaning the slab surface by wire brush as directed including provding first layer of c.m. 1:4 of 40 mm thickness mixed with water proofing compound at rate prescribed by manufacturer, including putting of brick bats of average thickness 40 mm well immerssed in water laid uniformly on first layer of mortar including applying cement slurry @ rate of 0.08 bag / sqm. on fixed layer of brick bats including maintaining necessary slope, in second layer 40 mm thick c.m 1:4 mixed with water proofing compound as directed, including finishing smooth with cement slurry as directed complete. 341 providing and fixing polished 18mm thick green marble stone with flat edge polished of approved quality clading on sill and around the doors / windows / ventilation with offset 20mm thick cement plaster cm ( 1:4 ) and fixing with cement slurry & adhesive including moulding of exposed edges as directed by engineer in charge etc. complete 342 providing and laying cupboard / kitchen platform shutter by using 25mm x 37mm teakwood frame, 25mm thick approved quality commercial plywood for shutter with 19mm x 3mm teakwood bidden patting, one side 1mm thick good quality laminated sheet and other side 0.80mm laminated sheet work including necessary paint & fixtures and fastenings magnet including all material and labour etc. complete as directed. 343 providing and laying 18mm thick granite ( black ) top platform with sandwich type polished kotah stone as vertical member including polished kotah stone a slab with shelves in cement mortar 1:2 ( 1 cement :2 sand ) including edge champers polishing cutting and labour & polishing over edges etc. complete. 344 providing and laying machine cut free edges machine polished blue kota stone finished treads & riser in single pieces on a bed of 20mm ( average ) thick base of cement mortar 1:6 ( 1 cement :6 coarse sand ) or l.m. 1:1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete 345 providing 20mm thick water proofing cement plaster in single coat on rough side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( 1 ) cement mortar 1:3 ( 1 cement :3 sand ) including finishing with a floating coat of neat cement slurry with adding water proofing materials like p.d. proof as equivalent. 346 providing and laying stone crete plaster outside for all floor to the brick or concrete surface consisting of basecoat of cement plaster 20mm thick in cm 1:3 ( 1 cement : 3 sand ) in rough finish and top coat of average thickness of 10 mm in white cement & gray cement and marble powder mix in proportion of i.e. equal proportion and mix dolomite pure white or colour chips of grade no to required by volume and pigments mixed as specified plaster shall be chiseled as directed with drip mould pattern groves as per approved pattern including scaffolding curing etc complete 347 providing and fixing marble stone shelf in walls including making gishi on wall and fixing it with cement mortar 1:4 including all necessary and labour etc. complete 348 providing and fixing green marble stone partition for urinal including making gishi on wall and fixing it with cement mortar 1:4 including all necessary and labour etc. complete. 349 providing and making polished kotah stone dedo partition and abhrai including making gishi and wall and fixing it with cement mortar jointed with grey cement slurry including rubbing and polishing etc. complete. 350 providing and laying water proofing treatment on terrace slab [ a ] applying one coat of zycosil in distilled water in proportion 1:10 using paint brush or roller or spray equipment [ b ] after two or three days of ezycosil treatment apply diluted zycofil in ration 1:1 on the dry surface by using a paint brush [ c ] after finishing the whole treatment terrace shall be flooded with water for the period of two weeks or as directed by engineer in charge. 351 providing and fixing stainless steel sink 1.00mm thick of size 460mm x 610mm 200mm with c.i. or m.s. bracket including fixing in wall of made in good as directed including providing & fixing c.p. brass waste for wash basin 32mm dia including providing & fixing m.i. fisher union for wash basin 32mm dia including providing & fixing piller tap capstan heal screw down high pressure with screws, shanles and back nuts of 50mm dia including pvc waste pipe and plastic connection etc. complete. 352 providing and fixing 50 mm dia. gun metal check or non return full way wheel valve etc. complete 353 providing and fixing 80 mm dia. gun metal check or non return full way wheel valve etc. complete. 354 providing and fixing 110mm dia. flange sluice valve including tail piece, nut bolts and all necessary materials & labor etc. complete. 355 providing and fixing 12.5 litres low level flushing cistern with isi mark pvc flush tank including fittings such as connection pipe with 15mm nominal size pvc ball valve with polythelene float push button type union and coupling for connection with inlet, outlet and overflow pipe 32mm dia. making good the same connecting the flush bend with cistern and closed etc. complete ( a ) pvc forthem ( i ) in required colour. 356 providing and fixng curtain using cotton / nylon / semi nylon / valvet / crush cloth ( price rs.175.00 per meter of 1.20 mt. width and backing cloth of rs.75.00 / rmt. ) including necessary hanging attachments like hooks / rings, 20mm ss rod / alluminium channel / socket on rod ends / middle supporting sockets etc. complete 357 repairing and raising existing brick masonry chamber 0.60 x 0.45 mt. inside dimensions with bricks having crushing stength not less than 35 kg / m2 in c.m. 1:5 heavy duty perforated rcc percast cover 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) inside plaster 15mm thick with c.m. 1:3 with a floating coat of neat cement slurry etc. including dismentalling demolition brick work, rcc work if necessary with all labor & material etc. as directed. 358 repairing the existing ez 7 section fully glazed window including fixing 4mm glass, new handle, pavan kadi, hook & eye, oil paint including remaining & refixing, welding, riveting nut bolting etc. as directed. 359 providing and fixing pre cast rcc solid cover with frame size of cover 600 x 450 x 60mm including required reinforcement including fixing on site as directed etc. complete. 360 providing and fixing pre cast rcc perforated / solid cover with frame size of cover 300 x 300 x 60mm including required reinforcement including fixing on site as directed etc. complete. 361 supplying teakwood of best quality as per size given by engineerin charge. 362 reparing doors, windows & ventilator shutters ( panalled / flush / partly panalled & partly glazed ) including removing shutter, necessary replacement of hinges, megnet, stoppers, handles, aldrop, tadi as required including one coat of primer as directed etc. complete including replacement of broken galsses etc. complete 363 providing and fixing 90 cm high stainless steel railing made form anticorisive 304 grade ss pipe of 50mm dia. ( 16 guage ) as hand rail with ss 304 grade baluster of 32mm dia. ( 16 guage ) as pertical support fixed in rcc slab at 1.2 mt. c / c including three horizontal ss pipe of 16mm dia. ( 16 guage ) at equal distance fixed by 16mm dia. ( 16 guage ) ss pipe with baluster including accessories as per detailed drawing as directed etc. complete. 364 providing and fixing pop false ceiling fixed with alluminium angle framing of required size with necessary supported including fixing in line & level etc. complete. 365 providing and fixing one side 1mm thick laminated 9mm thick commercial plywood sheet wall panelling excluding framing. the colour shade as approved by architect and as directed by engineer in charge with all labour and material. 366 providing and fixing super sil metal gs panel 0.5mm thick ( 600 x 600mm & 1200 x 600mm moduled size or as size approved by engineer in charge ) ceiling fixeed with alluminium angle framing of required size with necessary supported including fixing in line & level etc. complete. 367 supply & fixing s.s pipe handle 30 cm long of asis 316 grade 368 supply and fixing mortice lock of standard quality. 369 supply and fixing floor spiring of approved quality inox make or as directed. 370 supply and fixing door closer of ( heavy quality ) hyper or as directed. 371 providing and fixing wash down water closet ( european type wc pan wall hung ) of size 570 x 380 x 400mm with integral p and s trap, flushing system seat cover etc. complete unit of american standard model no.3906 brand or any equivalent quality and brand as approved by engineer in charge including installing and fitting as per manufactures standards by skilled trained workman including testing etc. complete. 372 providing & fixing branded mirror 6mm thick of size 3 x 2 with black frame and standard quality of its equivalent as approved by engineer in charge saint gobian / modi guard equivelent quality etc. complete including fixing with ss stud as directed. 373 providing and fixing single lever kna3104 basin mixer with flexible connectors of isi mark plumber or its equivalent brand as directed engineer in charge. 374 providing and fixing single lever kna3101 lb wall mixer with shaped tabular bend set for over head shower of isi mark plumber or its equivalent brand as directed engineer in charge. 375 providing and fixing angle cock kna 2105 with wall flauge of mark of plumber or its equivalent brand as directed engineer incharge 376 providing and fixing bidet spray ( heath fancet ) ultima utm 1904 with chrome plated 1.00 meter expendable 100cm 130cm flexible metal tube & holder of plumber or its equivalent brand directed engineer in charge etc. complete. 377 providing and fixing flush value metro pool soft touch rx7104 with dual flow system with round cover plate of 25 mm size of isi mark plumber or its equivalent as directed by engineer in charge. 378 providing and fixing bib cock two way xm 2109 with wall flange 15mm dia. of isi mark plumber or its equivalent brand directed etc. complete. 379 providing and fixing bib cock xm 2103 with flange of isi mark plumber or its equivalent brand as directed engineer in charge etc. complete 15mm dia. 380 providing and fixing concealed stop cock ec 0405 of isi mark plumber or its equivalent brand as directed engineer in charge etc. complete 381 providing and fixing 2 flow over head shower itp 2221 with antitime jets with shower arm and wall hungs of isi mark plumber or its equivalent brand as directed engineer in charge etc. complete. 382 providing and fixing towel ring round eg 7009 of mark plumber or its equivalent as directed by engineer in charge etc. complete. 383 providing and fixing toilet paper holder eg 7007 with laid ( cover ) of approved brand of plumber or its equivalent as directed engineer in charge etc. complete. 384 providing and fixing towel rack 450mm ( 18 ) with hook eg 7718 approved brand of plumber or its equivalent as directed engineer in charge etc. complete. 385 providing and fixing soap dish with metal dish erm 0913 approved brand of plumber or its equivalent as directed engineer in charge etc. complete. 386 providing & fixing wooden partition / door including 3 1 / 2 x 2 size ghana teakwood framing as directed including 12 mm thick ply both sides of green or century make bwr ply confirming to is 710 including both side lamination of 1.0 mm thick of green, broome equivalent make including necessary drawing including 12 mm thick soft board as directed including tapestry it of approx rs.200 / rmt including necessary ghana teakwood beading & melamine polishing to exposed faces including necessary ss screws, khili, fevicol etc. of suggest brand by engineer in charge including lead & lift as directed by engineer in charge including all lead & as directed by engineer in charge and as per architect drawings etc. complete. 387 providing & fixing table for work station of size as directed of height up to 0.80 mt. or size as directed using 19 mm thick plywood of bwr confirming to is 710 of green or century make, designs & grooves as directed by architectural drawings, lamination of 1.0 mm thick in single or double shade of green, broom or equivalent make of plain or texture finish including necessary keyboard drawer, 3 drawer cabinet of size 21 or as directed, stand for cpu size 10 x 20 or size as directed, necessary ss screws, handles, magnet, hinges, khili, drawer lock of godrej make fevicol etc. of suggested brand by engineer incharge telescopic channel of hetthich, sleek or efficient make, teakwood foot rest of 3 x 2 size or size as directed, necessary teakwood beading of ghana teakwood, melamine polishing to exposed edges, providing cable manager including all cost of material, labours with all lead & lift including inside of drawers & shutters in white laminates of 0.80 mm thick as directed by engineer in charge as per architect drawing etc. complete. 388 providing texture colour using asian paints royal colour or its equivalent make including one coat of primer, applying putty nad sand papering in line and level and applying texture effect using suitable roller or equipment as approvd by archiotect complete as directed. 389 providing and fixing gypsum board panelling including fixing gi / teakwood beding of size 2 1 / 2 x 1 @ 1.0mm c / c with ss screws & fixing gypsum board sheets of 12mm thick of size 1.2 x 1.8m on beading with ss screw including lapi putti & one coat of primer & two coats of plastic paint etc. complete. 390 providing and fixing pvc valve for astral / finolex make or as directed ( a ) 15 mm dia. 391 providing and fixing pvc valve for astral / finolex make or as directed ( b ) 25 mm dia. 392 providing and fixing pvc valve for astral / finolex make or as directed ( c ) 32 mm dia. 393 providing and fixing pvc valve for astral / finolex make or as directed ( d ) 40 mm dia. 394 providing and fixing pvc valve for astral / finolex make or as directed ( e ) 50 mm dia. 395 providing and fixing pvc ball valve ( a ) 15 mm dia. 396 providing and fixing pvc ball valve ( b ) 25 mm dia. 397 providing and fixing brass ball valve ( a ) 15 mm dia. 398 providing and fixing brass ball valve ( b ) 25 mm dia. 399 providing and fixing vertical blinds for powder coated aluminum partation , doors & windows with fixtures and fastening and necessary fitting including labour and material etc complate. 400 providing and casting in situ ordinary c.c. m 150 mix and providing necessary pin header incuding shuttering scaffolding laying vibrating curing and finishing complete without v grooves hit. from 0 to 5.0mtrs. 401 providing and fixing openwel sub merssible mono block pump set 7.5 hp ( c ) 670 lpm discharge @ 40 mtr. head suitable for 50mm dia. delievery pipe cat.ii crompton, kirloskar, kalama or its equivalent as directed by engineer in charge. 402 providing and fixing openwel sub merssible mono block pump set 5 hp ( c ) 670 lpm discharge @ 40 mtr. head suitable for 50mm dia. delievery pipe cat.ii crompton, kirloskar, kalama or its equivalent as directed by engineer in charge. 403 providing and fixing motor control cubical panel ( direct on line ) ( b ) dol for 7.5 hp. gelco, sun, smudra or its equivalent as directed by engineer in charge. 404 providing and fixing motor control cubical panel ( direct on line ) ( b ) dol for 5 hp. gelco, sun, smudra or its equivalent as directed by engineer in charge. 405 providing and fixing isi mark pvc insulated flat flexible submersible copper cable. ( c ) 3 core x 4 sq.mm. finolex or its equivalent as directed by engineer in charge. 406 engaging services of labours male / female for various road and building maintainance works including cleaning jungle cutting and other various type of works as directed by engineer in charge. 407 engaging services of labours for cutting shrurbs, grass on building of any height including cost of helper for maintaining jula. ( item include with cost of two labours ) 408 engaging services of skilled labours for various road and building maintainance works as directed by engineer in charge. 409 engaging services of i st class carpenter for various type of wood works, windows, shutter etc. complete as directed by engineer in charge. 410 engaging services of wireman for all type of repairing electrification work as directed by engineer in charge. 411 engaging services of plumber for all type of repairing of water supply line at any places & any type of works etc. complete as directed by engineer in charge. 412 engaging services of mason for all type of road & building work at any places & any type of works etc. complete as directed by engineer in charge. 413 engaging services of chokidar for all type of materials & building as directed by engineer in charge. 414 engaging services of painter for all type of color work for all type of stucture as directed by engineer in charge. 415 engaging services of driver for light / heavy vehicle as directed. 416 engaging services of white washer for all type of nature works as directed by engineer in charge. 417 engaging tractor with trolly with hydraulic utilities unloading & operator including oil, lubricantes, diesels etc. complete. 418 engaging excavator ( j.c.b. type ) with operator including oil, lubricantes, diesels etc. complete. 419 engaging truct / dumper, water tanker hydraulic utilities unloading & with operator including oil, lubricantes, diesels etc. complete. 420 engaging tandome power roller ( 8 to 10 tone ) with operator including oil, lubricantes, diesels etc. complete. 421 providing trimix machine for leveling smooth, finishing including channal fixing electric supply etc & dewatering of excess water through vacume pump including transporting from machine etc compete as directed. 422 engaging vibratory roller ( earth vibro ) with operator including oil, lubricantes, diesels etc. complete. 423 pilot bore holes 300 mm dia including lower housing casing & stainor pipes incl. gravel packing 424 providing and laying supplying e.r.w. black pipe 180mm dia etc complete or 6kg / sqcm 425 providing and fixing 1 hp single phase / three phase pumpset incl. cable wire, panel board etc. including all accessories. 426 providing and fixing 1.5 hp single phase / three phase pumpset incl. cable wire, panel board etc. including all accessories. 427 providing and fixing 3 hp single phase / three phase pumpset incl. cable wire, panel board etc. including all accessories. 428 providing and fixing 5 hp single phase / three phase pumpset incl. cable wire, panel board etc. including all accessories. 429 providing and fixing 7.5 hp single phase / three phase pumpset incl. cable wire, panel board etc. including all accessories. 430 providing and laying hdpe column pipe incl. necessary threading, fitting & jointing etc. ( i ) 40.00mm 431 providing and laying hdpe column pipe incl. necessary threading, fitting & jointing etc. ( i ) 50.00mm 432 providing and laying hdpe column pipe incl. necessary threading, fitting & jointing etc. ( i ) 65.00mm 433 providing and laying hdpe column pipe incl. necessary threading, fitting & jointing etc. ( i ) 70.00mm...

Nagar Palika Nigam - Gujarat

31022120 repairing & supplying work year 2022 23 within nagar palika area chhotaudepur. 1 20002 20.3 demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. ( i ) r.c.c. work 2 04001a excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead ( a ) loose or soft soil 3 04001b excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead ( b ) dense or hard soil 4 04002a excavation for foundation for depth from 1.5m to 3.0m including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead ( a ) loose or soft soil 5 4007 4.24 filling in plinth with sand under floors including watering remming, consolidating and dressing complete ( upto 10 ton ) 6 4008 filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including watering remming and consolidating etc. complete. ( more than10 ton ) 7 5003 5.3. providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 coarse ssand :6 hand broken stone aggregates 40 mmnominal size ) and curing complete excluding cost of forwork in ( a ) foundation and plinth ( upto 10 ton ) 8 5004 5.3.3 providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse sand :8 hand broken stone aggregates 40 mm nominal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth. ( upto 10 ton ) 9 014b 5.4 providing tmt bar fe 415 reinforcement for r.c.c work including bending, binding and placing in position complete upto floor two leval ( upto 10 ton ) 10 05019d 5.6.2 provindg upto floor two level precast cement concrete jali or grill 1:2: 4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size ) reinforced with 1.6 mm dia. mild steel wire including roughening, cleaning, fixing and finishing in cement mortar 1:3 and curing complate. ( d ) 75 mm thick 11 14015a 14.71 providing and laying cement concrete flooring 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with a floating coat of neat cement. ( a ) 40 mm thick. ( upto 10 ton ) 12 024a 5.8 providing and laying controlled cement concrete m 200 and curing complete excluding the cost of formwork and reinforcement of reinforced concrete work in . ( a ) foundations, footing, base of colums and mass concrete ( upto 10 ton ) 13 05024c 5.8.2 providing and laying controlled cement concrete m 200 and curing complete excluding the cost of formwork and reinforcement of reinforced concrete work in . ( c ) slabs, landing, shelves, balconies, lintels, beams, girders and cantilever up to floor two level. ( more than 10 ton ) 14 025d 5.8 providing and laying controlled cement concrete m 250 and curing complete excluding the cost of formwork and reinforcement of reinforced concrete work in . ( d ) columns, pillars, posts and struts upto floor two level. ( more than 10 ton ) 15 06002b 6.13 brick work using common burnt clay building bricks having crushing strength not less than 35 kg. sq.cm.in foundation and plinth in cement mortar 1:6 ( 1 cement: 6 fine sand ) ( b ) convention ( upto 10 ton ) 16 6008b2 6 ( ii ) half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg.sq.cm.in cement mortar 1:5 ( 1 cement: 5 fine sand ) in foundation and plinth ( b ) conventional ( upto 10 ton ) 17 10005a 10.3 provindin and fixing 35 mm thick shutters fhor doors, windows and clearstory windows including blackenamelled m.s.butt hinges with necessary screws. ( a ) indian teak wood ( i ) fully panelled ( upto 10 ton ) 18 10025a 10.1 providing and fixing m.s grillss of required pattern to wooden frames of windows etc.with m.s. flats at required spacing and frame alround, square of round bars with round headed bolts and nuts or by screws ( a ) plain grill. ( upto 10 ton ) 19 10025b 10.1 providing and fixing m.s grills of required patten to wooden frames of window etc with m.s flates at required spacing and frame alround , squire or round bars with round headed bolts and nuts or by screws ( b ) ornamental grill 20 14022 providing & laying 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1: cement : 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete 21 14023 providing and fixing pre cast concrete kerb stone of gray cement based concrete block 30 cm length, 30cm, height and 15cm thick of m 250 grade concret as per approved design and including excavation for fixing iv proper line ans level, filling the joint with c:m 1:3 ( 1: cement : 3 fine sand ) etc. complete 22 14033 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m200 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and leve etc complete. 23 17001a 17.58 providing 10 mm. thick cement plaster in single coat on brick / concrete walls for interior plastering up to floor two level and finished even and smooth in. ( i ) cement mortar 1 : 3 ( 1 cement : 3 sand ) 24 7002a 17 providing 15 mm. thick cement plaster in single coat on rough ( similar ) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in. ( i ) cement mortar 1 : 3 ( 1 cement : 3 sand ) 25 17009 17.95 20 mm. thick sand faced cement plaster on wall upto height 10 metres above ground level consisting of 12mm thick backing coat of c.m. 1 : 3 ( 1 cement : 3 sand ) and 8 mm thick finishing coat of c.m. 1 : 1 ( 1 cement : 1 sand ) etc. complete 26 17015 providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1 :1 including neat cement finishing watering etc. complete. 27 18023 18.46 distempering ( one coat ) with oil bound washable distemper of approved brand and of required shade on wall surface to give an even shade, after thoroughly brushing the surfaces clean of all grease, dirt, loose pieces of scales and also including distempering with oil bound washable distemper of preparing the surface even & smooth. 28 007d 24. providing and laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np 2 of the followings internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( d ) 300 mm ( more than 10 ton ) 29 007e 24. providing and laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np 2 of the followings internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( e ) 450 mm. ( upto 10 ton ) 30 007g 24. providing and laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np 2 of the followings internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( g ) 600 mm. ( upto 10 ton ) 31 26135 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level of slops of i.s. 458 / 1971 class np3 casted by vertically vibrated technology of following internal diameter. ( v ) 900 mm dia 32 mr providing & laying laying single piece mirror polished grenite stone slab 16mm to 18mm ( avrage ) thick including full moulded round front & rear edge in jumbs & sill laid in c.m1:6 ( 1: cement : 6 coarse ) jointed with grey cement slurry including rubbing & polishing etc complete. 33 mr aluminium composite panelling to drop fin and front colum, etc.supply & fixing of aluminium composite panel ( acp ) , 3 mm thick in required colours for interiors / exteriors consisting of two layers of aluminium skings of 0.25 mm thick sandwiching a thermo plastic core in continuous lamination process with pvdf coating for interior / exterior grades ensuring long colour and no fungal attacks.base frame work with aluminium sections shall be fixed over the brick work / ms and the above aluminium panels shall be fixed to the frame work as cladding.it includes cost of labour, materials, accessories, adhesives, scaffolding, wastages, transport, taxe s.fixing into a neat finish in aesthetic point of view, without any 34 10028 providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094 kg / rmt ) , horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm ( of jindal section no: 8687 @ wt.of 0.695 kg / mt ) , vertical member of size 61.85 mm x 31.75mm x 1.30 mm ( of jindal sectio no:8758 @ wt.of 0.0.659 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no : 8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 35 14035 providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar cream out upto surface using white cement including rounding off junctions and 36 14012a 14.43 providing and laying polished kota stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement : 6 coarse sand ) or l.m. 1 : 1.5 ( 1: lime putty : 1.5 coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. ( a ) 25 mm thick. ( upto 10 ton ) 37 14009c 14.32 ( c 1 ) providing and laying marbo grenite tiles 8 to 10 mm thick, 24 x 24 in skrting risers of steps and dedo on 10 mm thick cement plaster 1 : 3 ( 1 cement : 3 coarse sand ) and jointed with white cement slurry. ( upto 10 ton ) 38 14009a 14.32 providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10 mm thick cement plaster 1 : 3 ( 1 cement : 3 coarse sand ) and jointed with white cement slurry. ( upto 10 ton ) 39 24016a 24.44 constructing brick masonary chamber for underground c.i inspection chamber and bends with bricks having crushing stregth not less then 35 kg / cm2 in c:m 1 :5 c.i. cover with frame ( light duty ) 455 mm x 610 mm internal dimensions total weight of cover with frame to be not less than 38 kg . ( wt. of cover 23 kg. ) and wt.of frame 15 kg. ) ( r.c.c. top slabe with 1:2:4 mix ( 1: cement :2 coarse sand : 4 graded stone aggregate 20 mm size ) foundation concrete 1:5:10 in side plaster 15 mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( i ) in side dimensions 455mm x 610 mm and 450 mm deep for single pipe line. ( upto 10 ton ) 40 r.a providing and laying 25mm thick semi dense bituminous concrete with b.t. aggregate as per m.o.r.t. & h. gradation and bulk, asphalt grade vg 30 for mixing @ 50.00 kg / m.t. i.e. 5.0 % by weight of total mix including heating and mixing the aggregate and asphalt by continuous of drum mix plant and hot laid process laying with paver finisher and consolidation with roller as per m.o.r.t. & h. specification to achieve desire density, including cost all materials, equipments, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractors 41 102003 26161 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms. per sqm area , thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 & finished surface to be level. uniform and free from streaks and holes. ( as per government letter no. 42 r.a providing and laying wet mix macadam base course 250 mm thick in required layers as per morth specification using machine crushed b.t. chips as per required gradation, mixing with required optimum quantity of water, conveying the mix to site of work, spreading in to grade and camber with paver / mechanical means and consolidation each layer with vibratory roller to aschieve the desired density including cost of material labour plant and equipment etc. complete. 43 26089g 26.105 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as peris 458 1991 specifications including setting the pipes in c. m. 1:2 watering and laying ( to level or slopes ) of class np 3 of following internal diameters. ( vii ) 1200 mm dia. ( upto 10 ton ) ...

Road And Building Department - Gujarat

30673499 annual rate for various item of material supply and labour for road and building works. 1 earthwork for embankment including breacking clods, dressing with all lead and lift. ( excluding watering and consolidation from borrow pits within land width. 2 earthwork for embankment including breacking clods, dressing with all lead and lift. ( excluding watering and consolidation from borrow pits within 0.50km 3 earthwork for embankment including breacking clods, dressing with all lead and lift. ( excluding watering and consolidation from borrow pits within 1.00km 4 earthwork for embankment including breacking clods, dressing with all lead and lift. ( excluding watering and consolidation from borrow pits within 2.00km 5 rolling of earth work in layers with power roller including filling in depression which occur during the process. 6 watring of earth work in layers with power roller including filling in depression which occur during the process. 7 earthwork in cutting including preparing the slope and camber and stacking or utilising the cutting stuff in bank as directed upto 200 meter from the end of cutting with all lead and lift. ( i ) soft murrum 8 earthwork in cutting including preparing the slope and camber and stacking or utilising the cutting stuff in bank as directed upto 200 meter from the end of cutting with all lead and lift. ( ii ) hard murrum 9 box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slopes as directed upto 50mts. lead. 10 supplying of graded stone agg. of following sizes ( for w.b.m. road ) ( at quarry ) ( a ) hand broken stone agg. 40mm to 63mm size. 11 supplying of graded stone agg. of following sizes ( for w.b.m. road ) ( at quarry ) b ) hand broken stone agg. 25mm to 90mm size. 12 carting charge of hand broken stone agg. with own vehicle as directed.0 / 0 to 1 / 0 km. 13 carting charge of hand broken stone agg. with own vehicle as directed. 0 / 0 to 2 / 0 km. 14 carting charge of hand broken stone agg. with own vehicle as directed. 0 / 0 to 3 / 0 km. 15 carting charge of hand broken stone agg. with own vehicle as directed.0 / 0 to 4 / 0 km. 16 carting charge of hand broken stone agg. with own vehicle as directed. 0 / 0 to 5 / 0 km. 17 carting charge of hand broken stone agg. with own vehicle as directed. above 5 km and upto 10km. 18 carting charge of hand broken stone agg. with own vehicle as directed. above 10km and upto 15km. 19 carting charge of hand broken stone agg. with own vehicle as directed. above 15km and upto 25km. 20 carting charge of hand broken stone agg. with own vehicle as directed. above 25km and upto 50km. 21 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( a ) 40 to 63mm size. 22 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( b ) 40mm size. 23 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( c ) 25 to 40mm size. 24 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( d ) 12 to 20mm size. 25 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( e ) 20mm size. 26 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( f ) 10mm size. 27 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( g ) 12mm size. 28 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( h ) 10mm to 12mm size. 29 supplying of crushed stone agg. chipping etc. of hard stone of following nominal size, free of desintegrated pieces, deletarious and organic matter ( for bitumen surface dressing etc. ) and grading as per i.r.c. code ) at quarry. ( i ) 6mm size gritt. 30 carting charge of sand and crushed stone with own vehicle as directed. 0 / 0 to 1 / 0 km. 31 carting charge of sand and crushed stone with own vehicle as directed. 0 / 0 to 2 / 0 km. 32 carting charge of sand and crushed stone with own vehicle as directed. 0 / 0 to 3 / 0 km. 33 carting charge of sand and crushed stone with own vehicle as directed. 0 / 0 to 4 / 0 km. 34 carting charge of sand and crushed stone with own vehicle as directed. 0 / 0 to 5 / 0 km. 35 carting charge of sand and crushed stone with own vehicle as directed. above 5 km and upto 10km. 36 carting charge of sand and crushed stone with own vehicle as directed. above 10km and upto 15km. 37 carting charge of sand and crushed stone with own vehicle as directed. above 15km and upto 25km. 38 carting charge of sand and crushed stone with own vehicle as directed. above 25km and upto 50km. 39 supplying of coarse clean sharp sand at quarry. 40 supplying of murrum or binding materials on quarry site. 41 supplying of hard murrum 50mm to 150mm. at quarry site 42 supplying of quarry waste at quarry site. 43 supplying of stone dust at quarry site. 44 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. 0 / 0 to 1 / 0 km. 45 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. 0 / 0 to 2 / 0 km. 46 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. 0 / 0 to 3 / 0 km. 47 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. 0 / 0 to 4 / 0 km. 48 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. 0 / 0 to 5 / 0 km. 49 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. above 5 km and upto 10km. 50 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. above 10km and upto 15km. 51 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. above 15km and upto 25km. 52 carting charge of soft murrum / hard murrum / quarry weste / stone dust. with own vehicle as directed. above 25km and upto 50km. 53 sreading the stone agg. for soling and w.b.m. including filling the intersties forming the surface to required camber and gradient as directed. 54 spreading murrum blindage / sand / quarry weste / stone dust or road crust, filling the gaps in metal and levelling to camber and gradient as directed. 55 rolling and consolidation of soling including filling in depression which occur during the process with power roller exceeding 8 tonnes and not exceeding 12 tonnes. 56 supplying of rubble of good quality at quarry site. 57 supplying of rubble not less than 40kg weight at quarry site. 58 carting charge of solling and rubble with own vehicle as directed with diesel driver. 0 / 0 to 1 / 0 km. 59 carting charge of solling and rubble with own vehicle as directed with diesel driver. 0 / 0 to 2 / 0 km. 60 carting charge of solling and rubble with own vehicle as directed with diesel driver. 0 / 0 to 3 / 0 km. 61 carting charge of solling and rubble with own vehicle as directed with diesel driver. 0 / 0 to 4 / 0 km. 62 carting charge of solling and rubble with own vehicle as directed with diesel driver. 0 / 0 to 5 / 0 km. 63 carting charge of solling and rubble with own vehicle as directed with diesel driver. above 5 km and upto 10km. 64 carting charge of solling and rubble with own vehicle as directed with diesel driver. above 10km and upto 15km. 65 carting charge of solling and rubble with own vehicle as directed with diesel driver. above 15km and upto 25km. 66 carting charge of solling and rubble with own vehicle as directed with diesel driver. above 25km and upto 50km. 67 preparing surface by brushing with wire brushes for removing craked mud. etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. ( a ) water bound macadam surface. 68 preparing surface by brushing with wire brushes for removing craked mud. etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. ( b ) black top surface. 69 surface dressing in two coat with bitumen using 18 kg. bitumen per 10sqm with 0.15 cum of stone chipping 12mm. nominal size per 10 sqm. or road surface for first coat and 11kg. of bitumen with 0.10 cum of stone chipping 10mm.nominal size per 10sqm. of road surface for second coat excluding rolling and consolidation etc. complete. ( stone chipping and bitumen shall be paid sapretely ) . 70 surface dresssing one coat wth paving bitumen using 18kg. bitumen per 10 sqm. with 0.15 cum. of stone chipping 12mm.l size per ten sqm. of road surface excluding rolling and consolidation ( stone chipping and bitumen shall be paid sepretaly ) 71 consolidation of surface dresssing with power roller including cost of fuel, hire charges or roller etc. 72 consolidation of open graded pre mixd asphalt carept with power roller including cost of fuel, hire charges of roller etc. comp. 73 consolidation of build up spray grout in required layer with power roller including cost of fuel, hire charges of roller etc. comp. 74 bitumen surface grouting by doing necessary box cutting of 0.20m , supplying 25 to 40mm , 40to 63mm metal and sprading the same layer wise including rolling and watering with tack coat of 2kg / sqm on top and supplying and spreading 6mm grit on top surface for dressing per300sqm 75 rent of road roller with deisel and direver ( the weight of road roller should be not less than 8 to 12 tonnes. ) 76 rent for water tanker with water, diesel and driver. ( a ) capacity upto 5000liters. 77 rent for water tanker with water, diesel and driver. ( b ) capacity upto 10000 liters. 78 rent for truck with diesel and driver. 79 rent for tractor with diesel and driver. 80 hiring of backhoe loader / jcb including diesel and driver use on emergency basis 81 rent for tractor with diesel and driver and with trolly and other equipment. 82 labour work for metal patch with incl. spreading of h.b. metal / crushed metal as directed and apllying asphalt 5kg / 10sqm. for teack coat incl. rolling and consolidation with power roller as directed. 83 labour work for metal patch with incl. spreading of h.b. metal / crushed metal as directed and apllying 10kg / 10sqm for metal patchwork. incl. rolling and consolidation with power roller as directed. 84 labour work for spreading the asphalt mix material supplied at site for patch work incl. cleaning the surface by brushing etc. complete as directed. 85 carting of mix material for asphalt patch work for hot mix plant site to work site as directed. ( a ) upto 15km. lead. 86 carting of mix material for asphalt patch work for hot mix plant site to work site as directed. ( b ) from 15 / 0 to every kimometer per m.t. mix. 87 providing and fixing hectometer as per i.r.c. type design including painting lettering etc. complete fixing in earth. 88 providing and fixing hectometer as per i.r.c. type design including painting lettering etc. complete fixing c.c. 1:5:10 89 providing and fixing hectometer stone of precast c.c. 1:2:4 including necessary reinforcement as per i.r.c. type design including painting and lettering etc. comp. ( i ) c.c. 1:5:10 90 providing and fixing guard stone as per i.r.c. type design incl. white washing etc. complete fixing in earth. labour charge consider 91 providing and fixing guard stone as per i.r.c. type design incl. white washing etc. complete fixing in c.c. 1:5:10. 92 providing and fixing guard stne of precast c.c. 1:2:4 incl. necessary reinforcement as per i.r.c. type design incl. white washing etc. comp. ( i ) c.c. 1:5;10 93 providing and fixing boundary stone as per i.r.c. type design including painting, carving, lattering etc. complete.fixing in earth. 94 providing and fixing boundary stone as per i.r.c. type design including painting, carving, lattering etc. complete.fixing in 1:5:10. 95 providing and fixing ordinary kilometer stone of app. hard stone as per i.r.c. type design in c.c. 1:4:8 inclding painting, lettering etc. complete. 96 providing and fixing ording kilometer stone of precast c.c. 1:2:4 incl. necessary reinfoircement as per i.r.c. type design in c.c. 1:4:8 incl. lettering and paint etc. complete for m.d.r. 97 providing and fixing ording kilometer stone of precast c.c. 1:2:4 incl. necessary reinfoircement as per i.r.c. type design in c.c. 1:4:8 incl. lettering and paint etc. complete for o.d.r, . / v.r. 98 providing and fixing 5th kilometer stone of approved hard stone as per i.r.c. type design in c.c. 1:4:8 including painting, lettering etc. complete. 99 providing and fixing 5th kilometer stone of precast c.c. 1:2:4 incl. necessary reinforcement as per i.r.c. type design c.c. 1:4:8 incl. lettering and painting etc. comp. for mdr. 100 providing and fixing indicator stone as per i.r.c. type design in c.c. 1:4:8 including white washing etc. complete. fixing in earth. 101 providing and fixing indicator stone of precast c.c. 1:2:4 incl. necessary reinforcement as per i.r.c. type design incl. white washing etc. comp. ( i ) fixing c.c.1:5;10 102 providing and fixing road sign board of m.s. plate and angle uron including painting, lettering etc. complete including fixing in c.c. 1:4:8 with necessary excavation etc. complete as per i.r.c. type design non reflective type. 103 providing and fixing village name board as per standard i.r.c. type design of steel plate including painting, lettering etc. complete including fixing in c.c. 1:4:8 block with necessary excavation complete. 104 providing and fixing junction boards of m.s. plates and angles as per standard i.r.c. type design, including fixing in c.c. 1:4:8 block with necessary excavation, painting, figuring and lettering on boards etc. complete. 105 painting and lettering with enamal paint 3 coats etc. complete. ( a ) ordinary km. stone for mdr. 106 painting and lettering with enamal paint 3 coats etc. complete. ( b ) ordinary km. stone for odr / vr 107 painting and lettering with enamal paint 3 coats etc. complete. © 5th k.m. stone. 108 painting and lettering with enamal paint 3 coats etc. complete. ( d ) hectometer stone. 109 painting and lettering with enamal paint 3 coats etc. complete. ( e ) road sign boards. 110 painting and lettering with enamal paint 3 coats etc. complete. ( f ) village boards. 111 painting and lettering with enamal paint 3 coats etc. complete. ( g ) junction boards. 112 labour charges for dry stone pitching 15cm. thick including preparing the surface. 113 labourcharges for dry stone pitching 22.5cm. thick including preparing the surface. 114 excavation for foundation upto 1.5m. depth incl. sorting out and stacking of useful materials and disposing of the excavated stuff upto 50m. lead. ( a ) loose or soft soil. 115 excavation for foundation upto 1.5m. depth incl. sorting out and stacking of useful materials and disposing of the excavated stuff upto 50m. lead. ( b ) dense or hard soil. 116 excavation for foundation upto 1.5m. depth incl. sorting out and stacking of useful materials and disposing of the excavated stuff upto 50m. lead. © hard murrum. 117 filling available excavated earth ( exlucing rock ) in trenches plinth sides of foundation etc.in layers. 118 filling in foundation and plinth with murrum or selected soil in layrs of 20cm. thickness including watering ramming and consolidating etc. complete. 119 filling around the pieps with murrum including dresssing, tempering etc. comp. 120 supplying and filling of empty cement bags with local sands.and stitching with thread.and placing it on the road side bank for protection as directed. incl. cost of empty cement bags. and other material and labour. 121 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, cruhsed stone agg. 20mm nominal size ) and curring complete excluding cost of formwork in foundation and plinth. 122 providing and casting in situ ordinary cement concrete m 200 for 150mm. thick wearing coat laid as directed including tamping vibrating, finishing curing and filling in joints with bitumen complete. 123 providing and casting in situ controlled cement concrete m200 for avg 75mm thick wearing coat laid as directed includinng tamping , vibrating, finishing curing and filling joit with bitumin complete 124 providing and laying cement concrete 1:5:10 ( 1, cement, 5, course sand, 10, hand broken stone agg. 40mm nominal size ) and curring complete excluding cost of formwork in foundation and plinth. 125 providing and casting in situ ordinary cement concrete m 100 mix for well steining incl. necessary shuttering, laying, vibrating and curring complete. 126 providing and casting in situ ordinary cement concrete m 100 and providing necessary pin headers incl. shuttering, scafolding, laying vibrating, curring and finishing cimp. with v groves. height from 0.0 to 5.0m. 127 providing and casting in situ ordinary cement concrete m 100 and providing necessary pin headers incl. shuttering, scafolding, laying vibrating, curring and finishing cimp. with v groves. height from 5.0 to 10.0m 128 providing and casting in situ ordinary cement concrete m 100 and providing necessary pin headers incl. shuttering, scafolding, laying vibrating, curring and finishing cimp. with v groves. height from 10.m to 15.0m 129 providing and casting in situ ordinary cement concrete m 100 and providing necessary pin headers incl. shuttering, scafolding, laying vibrating, curring and finishing cimp. without v groves. height from 0.0 to 5.0m. 130 providing and casting in situ ordinary cement concrete m 100 and providing necessary pin headers incl. shuttering, scafolding, laying vibrating, curring and finishing cimp. without v groves. height from 5.0 to 10.0m 131 providing and casting in situ ordinary cement concrete m 100 and providing necessary pin headers incl. shuttering, scafolding, laying vibrating, curring and finishing cimp. without v groves. height from 10.m to 15.0m 132 plain / reinforced cement concrete in sub structure complete as per drawings and technical specification clause 802, 804, 805, 806, 807, 1202 and 1204 of mord 2004. for height upto 5.00mt. ( i ) p.c.c. grade m 15 ( i ) nomial mix 1:2.5:5 133 providing and laying cement concrete 1:4:8 ( 1, cement, 4, sand, 8 machine cruhsed stone agg. 40mm nominal size ) and curring complete excluding cost of formwork in foundation and plinth. 134 providing and casting in situ ordinary cement concrete m 200 for average 75 / 100mm thick wearing coat laid as directed incuding. tamping, vibrating, finishing, curring and filling in joints with bitumen complete. 135 pointing on uncoursed stone masonary with cement mortar 1:3 ( 1, cement, 3, sand ) a. flush pointing. 136 providing 15mm thick cement plaster in single coat on brick / concrete wall for interior plastering upto floor two level, finished even and smooth in cement mortar 1:3 ( 1, cement, 3, sand ) 137 supplying, bending, binding and placing in position tmt bar reinforcement for r.c.c. work etc. complete. 138 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 2 of following internal diameter. ( a ) 300mm dia 139 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 2 of following internal diameter. ( b ) 450mm dia 140 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 2 of following internal diameter. ( c ) 600mm dia 141 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 2 of following internal diameter. ( d ) 750mm dia. 142 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 2 of following internal diameter. ( e ) 900mm dia. 143 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 2 of following internal diameter. ( f ) 1200mm dia. 144 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 3 of following internal diameter. ( a ) 300mm dia 145 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 3 of following internal diameter. ( b ) 450mm dia 146 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 3 of following internal diameter. ( c ) 600mm dia 147 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 3 of following internal diameter. ( d ) 750mm dia. 148 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 3 of following internal diameter. ( e ) 900mm dia. 149 supplying and fixing reinforced concrete heavy duty nonpresure pipes with collars for culverts including setting and jointing the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i.s. class np 3 of following internal diameter. ( f ) 1200mm dia. 150 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 2 of following internal diameter. ( at factory site. ) ( a ) 300mm dia 151 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 2 of following internal diameter. ( at factory site. ) ( b ) 450mm dia 152 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 2 of following internal diameter. ( at factory site. ) ( c ) 600mm dia 153 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 2 of following internal diameter. ( at factory site. ) ( d ) 750mm dia. 154 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 2 of following internal diameter. ( at factory site. ) ( e ) 900mm dia. 155 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 2 of following internal diameter. ( at factory site. ) ( f ) 1200mm dia. 156 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 3 of following internal diameter. ( at factory site. ) ( a ) 300mm dia 157 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 3 of following internal diameter. ( at factory site. ) ( b ) 450mm dia 158 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 3 of following internal diameter. ( at factory site. ) ( c ) 600mm dia 159 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 3 of following internal diameter. ( at factory site. ) ( d ) 750mm dia. 160 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 3 of following internal diameter. ( at factory site. ) ( e ) 900mm dia. 161 supplying reinforced concrete heavy duty non presure pipes with collars for culverts of i.s. class np 3 of following internal diameter. ( at factory site. ) ( f ) 1200mm dia. 162 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. 0 / 0 to 1 / 0 km. 163 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. 0 / 0 to 2 / 0 km. 164 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. 0 / 0 to 3 / 0 km. 165 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. 0 / 0 to 4 / 0 km. 166 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. 0 / 0 to 5 / 0 km. 167 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. above 5 km and upto 10km. 168 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. above 10km and upto 15km. 169 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. above 15km and upto 25km. 170 carting charge for r.c.c. pipe. with own wehicle as directed at site of work. above 25km and upto 50km. 171 demolition and disposal of un serviceable materials and stacking of serviceable materials.with all lead ( a ) lime concrete. 172 demolition and disposal of un serviceable materials and stacking of serviceable materials.with all lead ( b ) un reinforced cement concrete. 173 demolition and disposal of un serviceable materials and stacking of serviceable materials.with all lead ( c ) brick or / and ucr masonary. 174 demolition including stacking of serviceable material and disposal of un servicable materials with all lead and lift. r.c.c. work. 175 numbering of c.d. works with approved paint including all materials for painting etc. comp. 176 providing and fixing post and pipe railing as per detailed drawing including 3 coats of painting to steel works complete.considering 15 mtr. of pipe railling.post size 80 x 80 x 6 mm angle.pipe size 40mm dia pipe a class.foundation plat size 200mm x200mm x 5mm in cluding colour work 177 rectification of bump along 5.5 mt width road surface as per stander drawing by providing moulded frame and manually seal coat using 6 to 10 mm machine crushed stone aggregate and asphalt 80 / 100 at rate of 3.0 kg / cum, finishing the bump with asphalt painting at the rate of 5.0 kg / 10 sqmt area , scraping existing surface stone aggregate, asphalt and rolling with hand roller etc complete. 178 rectification of bump along 3.5 mt width road surface as per stander drawing by providing moulded frame and manually seal coat using 6 to 10 mm machine crushed stone aggregate and asphalt 80 / 100 at rate of 3.0 kg / cum, finishing the bump with asphalt painting at the rate of 5.0 kg / 10 sqmt area , scraping existing surface stone aggregate, asphalt and rolling with hand roller etc complete. 179 painting lines, dashes, arrows, letter etc. on roads, air fields and linke two coats with road marking paint, brushes including cleaning the surface of all dirt, dust and other foregn matter. ( ii ) over 10cm. in width. 180 painting lines, dashes, arrows, letter etc. on roads, air fields and linke two coats with road marking paint, brushes including cleaning the surface of all dirt, dust and other foregn matter. ( ii ) upto 10cm. in width. 181 providing and laying hot applied termoplastic compound 2.5mm thick including glass bend @250 gms per sqm area thickness of 2.55mm is exclusive of surlface to be level , uniform, free from streaks and hole . 182 cleaning and grubbing road length incl. uprooting rank vegetation, grass, bushed, shurbs, sapling and trees girth upto 300m removal of stumps of trees cut earlier and desposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto upto a lead of 100 mt. including removal and disposal of top organic soil not exceeding 150mm. in thickness ( c ) by mechanical means in area of light jungle. 183 maintenance of hume pipe culvert by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908hume pipe ( 900 mm dia ) 184 maintenance of hume pipe culvert by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908hume pipe ( 1200 mm dia ) 185 maintenance of slab type culverts by way of clearing, cleaning, erosion repair, repairs to cracks, parapet walls and protection works as per drawing and technical specification clasue 1908hume pipe ( per runnig meter 1 span ) 186 white washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per techincal specification clause 1015 187 providing and fixing flood gauge post confiming to irc 67, 2012 using high intensity grade retro reflecting sheeting including border as directed fo . existing structure 125*50*125*50*4 mm mild steel hollow sction 2.30 mt long supply reveting and fixing 2mm thick alluminum sheet on one side of m section with engineering grade retrefletive sheet on aluminium sheet including lettering and border and finishing as per drawing and instruction of engineer in charge etc comp rs 1000 / flood gauge post and cement concrete 1:2:4 ( 20mm nominal size agreegate ) and curing complete excluding cost of form work in a ) foundation and plinth a ) . existing structure 188 providing and fixing flood gauge post confiming to irc 67, 2012 using high intensity grade retro reflecting sheeting including border as directed fo . existing structure 125*50*125*50*4 mm mild steel hollow sction 2.30 mt long supply reveting and fixing 2mm thick alluminum sheet on one side of m section with engineering grade retrefletive sheet on aluminium sheet including lettering and border and finishing as per drawing and instruction of engineer in charge etc comp rs 1000 / flood gauge post and cement concrete 1:2:4 ( 20mm nominal size agreegate ) and curing complete excluding cost of form work in a ) foundation and plinth b ) new structure 189 supplying and fixing cat eye made out from acrilo beautile sterine injection high compressed molding with reflector made of mmc ( prismatic type of 12cm*6cm*2.5cm ) providing with bituminous adhesive 100g with each unit for fixing high intensity 190 cauntionarty warning sign : providing and fixing sign boards made out of 2mm aluminium sheet : siae 90x90x90 cms. equilated treangle as per design on irc 67 1977. preteated with phospheting process and acid etching : coated with one coat epoxy primer and two coats of best quality epoxy paint, reflectorised with retro reflective sheeting as oer latest most specification : 3.1 m. long stand post and frame fabricated from suitable size iron angle of 35x35 3mm. 75x75x6 mms. required painted with best quality epoxy coatings in black and white bends the details of symbole for each board shall be as per the struction of engineer in charge the fixing at site shall be in 1:2: cc block of size 45x45x60cms. for each leg: including excavation curing etc. comp. under the supervision of engineerin charge.engineer garde. 191 informatory sign : providing and fixing sign boards made out 2mm alluminium sheet size 90x60cms. rectangle as per design of irc 67 1977 pretrated with phospheting process and acid atching : coated with one coat of epoxy primet and two coats best quality epoxy paint, reflectrorised with retro reflective sheeting as per latest most specification. 3.1mt. long stand post and frame fabricated from suitable size iron angle 35x35x3 mm. 75x75x6mm. required painted with best quality epoxy coatings in black and white bends, the detail of symbols for each board shall be as per the instruction of the egoneer charge. the fixing at site shall be in c.c. 1:2:4 block of size 45x45x60 cms. for each leg. incl. excavation, curring etc. comp. under the supervision of engineer in charge. 192 men at work ( heavy ) sign ( direction sign ) : providing and fixing sign board made out 2mm aluminium sheet size 120*90cms rectengular . oretreted with thermplasting process and acid etching , coated with one coat of epoxy primer and two coat best quality epoxy paint : reflectorise with retro reflective sheeting as par letest m.o.s.t specification , letter and numerals should be as par irc 30 1968 , 3.1 m long ( 2 nos ) stand post and frame fabricated from sutailble size iron angle 50*50*5mm painted with best quailty epoxy coating in black and white bends. high intencity grade. 193 village name / bump ahed sign: providing and fixing sign board made out 2 mm aluminium sheet :size 90*60cm rectangular par the design of irc 67 1977 pre treated with phospeting process & acid etching : coated with one coat of epoxy primer and two coats of best quilty epoxy paint : reflectorised with retro reflective sheet .as per letest m.os.t specification high intensity grade 194 removal of defective concrete cleaning the surface, applying the shortcrete mixture mechanically with compressed air under pressure comprising of cement, sand, course agg. water and quick setting compund in the proportion as per clause 2807.1 sand and c.a. confirming to is.383 and table.1 of is.9012 respectivelly, water cement ratio ranging from 0.35 to 0.50, density of gunite not less than 2000kg / cum , strength not less than 25 mpa. and workmanship confirming to clause 2807.6 1 demolition of brick work or stone masonary including stacking of serviceable materials and disposal with serviciable materials with all lead and lift. lime mortar. 2 demolition of brick work or stone masonary including stacking of serviceable materials and disposal with serviciable materials with all lead and lift. cement mortar. 3 demolition and disposal of un serviceable materials with all lead and lift in lime mortar. 4 demolition and disposal of un serviceable materials with all lead and lift in unreinforced cement concrete. 5 demolition including stacking serviceable and disposal of un serviceable material with all lead and lift in r.c.c. work 6 dismentalling tiled or stone floors laid in mortar including stacking of serviceable materials and disposal with unserviceable materials with all lead and lift. 7 excavation for foundation including sorting out and stacking os useful materials and disposing of the excavated stuff with all lead and lift. in loose or soft soil. 8 excavation for foundation including sorting out and stacking os useful materials and disposing of the excavated stuff with all lead and lift. in dense or hard soil. 9 providing and laying cement concrete 1:5:10 ( 1, cement, 5, course sand, 10 hand broken stone agg. 40mm nominal size ) and curring comp. excluding cost of formwork in foundation and plinth. 10 providing and laying cement concrete 1:4:8 ( 1, cement, 4, course sand, 8 hand broken stone agg. 40mm nominal size ) and curring comp. excluding cost of formwork in foundation and plinth. 11 uncoursed rubble masonary with hard stone of approved quality in foundation and plint in c.m. 1:6 ( 1, cement, 6, course sand ) including levelling up etc. comp. 12 uncoursed rubble masonary with hard stone of approved quality in foundation and plint in c.m. 1:5 ( 1, cement, 5, course sand ) including levelling up etc. comp. 13 providing and laying ordinary cement concrete 1:2:4 ( 1, cement, 2, course sand, 4 graded stone agg. 20mm nominal size ) with curring etc. comp. excl. the cost of reinforcement for coping. 14 providing and laying ordinary cement concrete 1:1.5:3 ( 1, cement, 1.5, course sand, 3 graded stone agg. 20mm nominal size ) with curring etc. comp. excl. the cost of reinforcement for coping. 15 providing and laying ordinary cement concrete 1:3:6 ( 1, cement, 3, course sand, 6 graded stone agg. 20mm nominal size ) with curring etc. comp. excl. the cost of reinforcement and formwork for coping. 16 brick work using common brunt clay building brick having crushing strength not less than 35kg / cm2 in cement mortar 1:6 ( 1, cement, 6, fine sand ) in foundation and plinth ( conventional ) 17 brick work using common brunt clay building brick having crushing strength not less than 35kg / cm2 in cement mortar 1:6 ( 1, cement, 6, fine sand ) in superstructure. ( conventional ) 18 half brick masonary in common burnt clay conventional building bricks having crushing strength not less than 35kg / cm2 in super structure in cement mortar 1:3 ( 1, cement, 3, course sand ) with 2 nos of 6mm dia m.s. round bars after every three coarse embeded in c.m. for all floors. 19 half brick masonary in common burnt clay conventional building bricks having crushing strength not less than 35kg / cm2 in super structure in cement mortar 1:4 ( 1, cement, 4, course sand ) 20 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, graded stone agg. 20mm nominal size ) for r.c.c. lintel with curing comp. excl. the cost of reinforcement.including cost of formwork. 21 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, graded stone agg. 20mm nominal size ) for reinforced concrete chhaja not exceeding 10cm. thick. upto floor two level incl. finishing the exposed surface with c.m. 1:3 ( 1, cement, 3, fine sand ) to give a smooth surface incl. centering and formwork and curing comp. excl. the cost of reinforcement. 22 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, graded stone agg. 20mm nominal size ) with curring comp. excl.. the cost of reinforcment for reinforced concrete work in slabs having thickness more than 10cm. upto 13cm. 23 providing and laying cement concrete 1:1.5:3 ( 1, cement, 1.5, course sand, 3 graded stone agg. 20mm nominal size ) with curring comp. excl.. the cost of reinforcment for reinforced concrete work in slabs having thickness more than 10cm. upto 13cm. 24 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, graded stone agg. 20mm nominal size ) and finishing smooth with curing compl. including the cost of formwork but excl. the cost of reinforcment for reinforced concrete wotk in beams . cross section area more than 0.8 sqm and upto 0.12 sqm. 25 providing and laying cement concrete 1:1.5:3 ( 1, cement, 1.5, course sand, 3 graded stone agg. 20mm nominal size ) and finishing smooth with curing compl. including the cost of formwork but excl. the cost of reinforcment for reinforced concrete wotk in beams . cross section area more than 0.8 sqm and upto 0.12 sqm. 26 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, graded stone agg. 20mm nominal size ) and finishing smooth with curing compl. incl. the cost of formwork but excl. the cost of reinforcment for reinforced concrete work in columns area more than 0.8 sqm and upto 0.12 sqm. 27 providing and laying cement concrete 1:1.5:3 ( 1, cement, 1.5, course sand, 3 graded stone agg. 20mm nominal size ) and finishing smooth with curing compl. incl. the cost of formwork but excl. the cost of reinforcment for reinforced concrete work in columns area more than 0.8 sqm and upto 0.12 sqm. 28 providing and laying cement concrete 1:2:4 ( 1, cement, 2, course sand, 4, graded stone agg. 20mm nominal size ) with curing complete excl. cost of formwork and reinforcement for reinforced concrete work in staircase . 29 providing and laying cement concrete 1:1.5:3 ( 1, cement, 1.5, course sand, 3 graded stone agg. 20mm nominal size ) with curing complete excl. cost of formwork and reinforcement for reinforced concrete work in staircase . 30 t.m.t. steel reinforcement for reinforced concrete work including bending, binding and placing in position comp. 31 cold twised steel reinforcement for reinforced concrete work incl. bending, binding and placing in position comp. 32 mild steel reinforcement for reinforced concrete work including bending, binding and placing in position comp. for all floors. 33 filling available excavated earth ( excluding roack ) in trenches plinth sides of foundation etc. in layer not exceeding 20 cms. in depth consolidating each deposited layer by ramming and watering. 34 filling in foundation and plinth with murrum or selected soil in layer of 20cms. thickness incl. watering ramming and consolidating etc. comp. 35 filling in plinth with sand under floor incl. watering, ramming consolidating and dressing etc. comp. 36 providing and laying in foundation and plinth under floor lime concrete with hard stone agg. 40mm. nominal size and 40% mortar comprising of 1, lime : 2, fine sand and curring comp, . excl. the cost of formwork. 37 providing and fixing mild steel ornamental grill of required pattern to wodden frame of windows etc. comp. incl. one coat of primer and two coats of oil painting. 38 providing and fixing mild steel plain grill of required pattern to wooden frame of windows etc. comp. including one cost of primer and two coats of oil painting. 39 providing 15mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:3 ( 1, cement, 3, sand ) finished even and smooth incl. curring. 40 providing 15mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:4 ( 1, cement, 4, sand ) finished even and smooth incl. curring. 41 providing 10mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:3 ( 1, cement, 3, sand ) finished even and smooth incl. curring. 42 providing 10mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:4 ( 1, cement, 4, sand ) finished even and smooth incl. curring. 43 providing 15mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:3 ( 1, cement, 3, sand ) finished even and smooth incl. with floating coats of cement slurry curring comp. 44 providing 15mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:4 ( 1, cement, 4, sand ) finished even and smooth incl.with floating coats of cement slurry curring comp. 45 providing 10mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:3 ( 1, cement, 3, sand ) finished even and smooth incl. with floating coats of cement slurry curring comp. 46 providing 10mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering in c.m. 1:4 ( 1, cement, 4, sand ) finished even and smooth incl. with floating coats of cement slurry curring comp. 47 white washing with lime on undecorated wall surface ( two coats to give an even shade incl. throughly brooming the surface to remove all dirt, dust mortar drops and other foreign matters. 48 colour washing with lime on undecorated wall surface ( two coats ) to give and even shade including throughly brooming the surface to romove all dirt, dust mortrar drops and toehr foreign matters. 49 20mm. thick sand faced cement plaster on walls consisting of 12mm. thick backing coat of cement mortar 1:3 ( 1, cement, 3, sand ) and 8mm. thick finishing coat of c.m. 1:1 ( 1, cement, 1, sand ) etc. comp. 50 finishing wall with water proofing cement paint on wall surface on un decorated wall surface ( two coats ) to give an even shade of app. brand and manufacture and of requied shade even after throughly brushing the surface to remove all dirt, dust, mortar drops and ramings of sloose powdered materials. 51 providing and laying precast terrezo tiles 20mm. thick white and black ( or the colour specified directed by engineer ) marble chips of sizes upto 6mm. laid in floors treated of steps and landing on a bed of 25mm thick av. of l.m. 1:1.5 ( 1, cement putty : 1.5 sand ) or c.m. 1:6 jointed with pigment to match the shade of tiles incl. rubbing and polishing etc. comp. with precast terrezo tiles of light shad using white cement. 52 providing and laying precast terrezo tiles 20mm. thick white and black ( or of the colour specifiedas directed by engineer ) marble chips of sizes upto 6mm. laid in floors tred of steps and landing on a bad of 25mm thick av. of l.m. 1:1.5 ( 1, cement putty : 1.5 sand ) or c.m. 1:6 jointed with pigment to match the shade of tiles incl. rubbing and polishing etc. comp. with precast terrezo tiles of light shad using ordinary cement. 53 providing and laying precast tarrazo tiles 20mm. thick with marble chips of sizes upto 6mm. thick in skirting and resers of steps not exceeding 30cms. in height on 10mm. thick cement plaster 1:3 ( 1, cement, 3, course sand ) jointed with neat cement slurry incl. rubbing and polishing comp. with tiles of dark shade using white cement. 54 providing and laying precast tarrazo tiles 20mm. thick with marble chips of sizes upto 6mm. thick in skirting and resers of steps not exceeding 30cms. in height on 10mm. thick cement plaster 1:3 ( 1, cement, 3, course sand ) jointed with neat cement slurry incl. rubbing and polishing comp. with tiles of dark. shade using ordinary cement. 55 providing and laying polished kota stone slab flooring over 20mm ( average ) thick base of cement mortar 1:6 ( 1, cement, 6, course sand ) or l.m. 1:1.5 laid over and jointed with grey cement slurry incl. rubbing and polishing complete ( a ) 25mm thick. 56 providing and laying kotah stone slab flooring 25mm. thick in risers of steps, dedo and pillars laid on 10mm. thick cement mortar 1:3 ( 1, cement : 3, course sand ) and jointed with grey cement slurry including rubbing and polishing etc. comp. 57 providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bad of 12mm thick c.m. 1:3 ( 1, cement : 3, course sand ) finished with flush pointing in white cement. 58 providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bad of 10mm thick c.m. 1:3 ( 1, cement : 3, course sand ) finished with flush pointing in white cement slurry. 59 providing and laying cushionoing layer on r.c.c. slab consosting of 75mm thick lime concrete using brick agg. 20mm nominal size using brick agg. of 20mm nominal size and 50% mortar comprising of 1 lime : 2 fine sand etc. comp. 60 providing and laying brick on edge flooring laid dry grouted with cement mortar 1:6 incl. finishing the flush curing etc. comp. 61 providing and laying cement concrete flooring 1:2:4 ( 1, cement, 2, course sand, 20mm nominal size ) laid in one layer finished with al floating coat of neat cement 40mm thick. 62 providing and laying cement concrete flooring 1:2:4 ( 1, cement, 2, course sand, 20mm nominal size ) laid in one layer finished with al floating coat of neat cement 50mm thick. 63 providing and laying 20mm thick precast cement concrete tiles with agg. of size upto 6mm laid in flooring treads of steps and landing on 20mm thick bed of c.m. 1:6 ( 1, cement, 6, coarse sand ) or l.m. 1:1.5 jointed with neat cement slurry with pigment to match the shade of tiles with precast tiles of dark shade using ordinary cement. 64 providing and fixing white porcelain water closed squatting pan 580mm. size ( indian w.c. pan ) including p trap etc. comp. 65 providing and fixing white porcelain water closed squatting pan 580mm. size ( european pan ) including p trap etc. comp. 66 providing and fixing to wall cielling and floor galvanised mild steel tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 15mm dia. 67 providing and fixing to wall cielling and floor in pvc pipe tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 15mm dia. 68 providing and fixing to wall cielling and floor galvanised mild steel tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 25mm dia. 69 providing and fixing to wall cielling and floor in pvc pipe tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 25mm dia. 70 providing and fixing to wall cielling and floor galvanised mild steel tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 40mm dia. 71 providing and fixing to wall cielling and floor in pvc pipe tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 40mm dia. 72 providing and fixing to wall cielling and floor galvanised mild steel tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 50mm dia. 73 providing and fixing to wall cielling and floor in pvc pipe tubes ( medium grade of the following nominal bore tube fitting and clamps incl. making good the wall ceilling and floor 50mm dia. 74 providing and fixing cast iron spigot and socket soil waste and ventilating pipes of the following nominal size 75mm dia. 75 providing and fixing in pvc pipe spigot and socket soil waste and ventilating pipes of the following nominal size 75mm dia. 76 providing and fixing cast iron spigot and socket soil waste and ventilating pipes of the following nominal size 100mm dia. 77 providing and fixing in pvc pipe spigot and socket soil waste and ventilating pipes of the following nominal size 100mm dia. 78 providing and fixing a.c. soil down take pipe with necessary bending etc. comp. 100mm dia. 79 providing and fixing in pvc pipe with necessary bending etc. comp. 100mm dia. 80 providing and laying ( two level or slope ) and jointing with stiff misture of cement mortar in proporation 1:1 salt glazed stone were pipes of following nominal internal diameter including testing of pipes and joints etc. comp. 150mm dia. 81 providing and laying ( two level or slope ) and jointing with stiff misture of cement mortar in proporation 1:1 in pvc pipe of following nominal internal diameter including testing of pipes and joints etc. comp. 150mm dia. 82 providing and laying ( two level or slope ) and jointing with stiff misture of cement mortar in proporation 1:1 salt glazed stone were pipes of following nominal internal diameter including testing of pipes and joints etc. comp. 100mm dia. 83 providing and laying ( two level or slope ) and jointing with stiff misture of cement mortar in proporation 1:1 in pvc pipe of following nominal internal diameter including testing of pipes and joints etc. comp. 100mm dia. 84 providing and fixing stone ware gully trap with c.i. grating brick masonary chamber and water tight c.i. cover with frame of 300mm x 300mm size ( inside ) standrd weight ( i ) square mouth trap © 150mm x 100mm size p or s type. 85 providing and fixing in pvc pipe gully trap with c.i. grating brick masonary chamber and water tight c.i. cover with frame of 300mm x 300mm size ( inside ) standrd weight ( i ) square mouth trap © 150mm x 100mm size p or s type. 86 providing and fixing cast iron ( spun ) nahni trap of the following nominal diameter of self cleaning design with c.i. screwed down or hinged grating incl. cost of cutting and making good the walls and floors 100mm inlet and 50mm outlet. 87 providing and fixing in pvc pipe nahni trap of the following nominal diameter of self cleaning design with c.i. screwed down or hinged grating incl. cost of cutting and making good the walls and floors 100mm inlet and 50mm outlet. 88 providing cement vata ( 10cms x 10cms size ) square round in cement mortar 1:1 incl. neat cement finishing watering etc. comp. 89 pointing on coursed stone / brick masonary with cement mortar 1:3 ( 1, cement, 3, sand ) ( a ) flush pointing. 90 repairs to doors and window as directed. eingneer in charge. 91 painting one coat ( excl. priming coat ) on previously painted steel and other metal / wood / wall surface with enamel paint brushing to give an even shade including cleaning the surface to give an even shade incl. cleaning the surface of all dirt, dust, mortar drops and toher foreign matter. 92 painting two coat ( excl. priming coat ) on previously painted steel and other metal / wood / wall surface with enamel paint brushing to give an even shade including cleaning the surface to give an even shade incl. cleaning the surface of all dirt, dust, mortar drops and toher foreign matter. 93 distempering with two coats with oil bound washable distemper of approved brand and manufacture and of required shade on un decorated wall surface to give an even shade after throughly brushing the surface free from all dirt, dust, mortar drops and other foreign matter and also incl. preparing the surface even and smooth. 94 scrapping of plaster from brick or stone masonry incl. chiselling ramming, scafolding etc. comp. 95 providing and fixing sheet glass of 3mm thick etc. complete excluding the cost of wooden beading. 96 providing and laying cement concrete pavement ( 25 to 50mm thick ) with 1:2:4 ( 1, cement, 4, course sand, 4, stone agg. 20mm nominal size ) including finishing with a floating coat of neat cement slurry. 97 destmentalling g.i. pipes, c.i. pipes s.w. pipes and a.c. rain water pipes with fitting and clamps including stacking the materials with all lead and lift. ( for any dia of pipes. ) 98 desmentalling sanitory fitting like wash basin, w.c. pan ( indian and europian type ) flushing tank etc. incl. stacking the materials with all lead and lift. 99 providing and fixing wood work in existing frame of doors / windows and clerestory windows and other similar size of requied work incl. oil painting to match the shade of existing colour incl. labour of removing old frame etc. comp. ( a ) indian teak wood. 100 providing and fixing wood work in existing frame of doors / windows and clerestory windows and other similar size of requied work incl. oil painting to match the shade of existing colour incl. labour of removing old frame etc. comp. ( b ) chemically treated not teak wood 101 providing and fixing gun metal check or non return full way wheel valve in existing line incl. removing existing valve incl. providing and fixing union of requied size. ( a ) 15mm dia 102 providing and fixing gun metal check or non return full way wheel valve in existing line incl. removing existing valve incl. providing and fixing union of requied size. ( b ) 25mm dia. 103 providing and fixing gun metal check or non return full way wheel valve in existing line incl. removing existing valve incl. providing and fixing union of requied size. ( c ) 40mm dia, . 104 providing and fixing in pvc product standarad quality check or non return full way wheel valve in existing line incl. removing existing valve incl. providing and fixing union of requied size. ( a ) 15mm dia 105 providing and fixing in pvc product standarad quality check or non return full way wheel valve in existing line incl. removing existing valve incl. providing and fixing union of requied size. ( b ) 25mm dia. 106 providing and fixing in pvc product standarad quality check or non return full way wheel valve in existing line incl. removing existing valve incl. providing and fixing union of requied size. ( c ) 40mm dia, . 107 providing corrugated g.i. sheets rooting fixed with galvanixed iron j or l hooks bold and nuts 8mm diameter with biturnen and g.i. impets washers filled with white lead comp. excl. the cost of purlins, rafters and trusses. ( i ) 0.80mm thick sheet. 108 providing absetos cement sheets roofing with gal. iron plain and biturnen wahsers comp. exluding the cost of purlins, rafters and trusses. ( a ) corrugated sheet ( ii ) 6mm thick. 109 providing and fixing p.v.c. rain water pipes of i.s.i. approved quality 6kg / cm2 working presure as directed of 75mm dia. 110 providing and fixing p.v.c. rain water pipes of i.s.i. approved quality 6kg / cm2 working presure as directed of 100mm dia. 111 providing and fixing pvc rain water spout of 50mm dia and 30cm length. 112 providing and fixing 1.20 meter high fencing with 2.0 meter long m.s. angles posts 40mm x 40mm x 6mm and oil painting 3, coats fixed at 2.5mt. c / c with five horizontal lines and two diagonals of galavanized steel barbed wire weighting 9.39 kg. per 100 meter, strained and fixed to posts with g.i. staples, incl. fixing posts in ground with 0.5m x 0.5m x 0.5 m block in c.c. 1:5;10 etc. comp. 113 providing and fixing rajula stone 75mm thick 60cm x 45cm size incl. fixing in cement mortar as directed. 114 providing and laying ordinary cement concrete 1: 1½ : 3 ( m 20 ) 1, cement, 1½ sand, 3, graded stone aggregate 20mm. nominal size ) and finishing smooth with curing complete, including cost of formwork but excluding cost of reinforcement for r.c.c. work in column ( 3 ) having c.s. area more than 0.12 and upto 0.18 sqm. 115 providing and laying ordinary cement concrete 1: 1½ : 3 ( m 20 ) 1, cement, 1½ sand, 3, graded stone aggregate 20mm. nominal size ) and for r.c.c. lintels incl. finishing smooth with curring of formwork but excl. the cost of reinforcement. 116 providing and laying ordinary cement concrete 1: 1½ : 3 ( m 20 ) 1, cement, 1½ sand, 3, graded stone aggregate 20mm. nominal size ) and finishing smooth with curing complete, including cost of formwork but excluding cost of reinforcement for r.c.c. work in ( ) beam having cross sectional area 0.12 to 0.18 sqm. 117 providing and laying ordinary cement concrete 1: 1½ : 3 ( m 20 ) 1, cement, 1½ sand, 3, graded stone aggregate 20mm. nominal size ) afor reinforcement concrete chhajjas not exceeding 10cm. thickness upto floor two level incl. finishing the exposed surface with c.m. 1:3 ( 1, cement, 3, fine sand ) to give a smooth and even surface centering, formwork and curring comp. excl. the cost of reinforcement. 118 providing and laying 24x24 vitrified 8mm thick flooring aver 20mm. ( av ) base of c.m. 1:6 on new surface or fixing on existing flooring by adhesive materials incl. desmentalling of existing flooring and jointed with colour cement slurry including finished with flush pointing and cleaning the surface etc. complete. a. dark shade 119 providing and laying 24x24 vitrified 8mm thick flooring aver 20mm. ( av ) base of c.m. 1:6 on new surface or fixing on existing flooring by adhesive materials incl. desmentalling of existing flooring and jointed with colour cement slurry including finished with flush pointing and cleaning the surface etc. complete. b. light shade. 120 providing and laying 24x24 vitrified 8mm thick flooring aver 20mm. ( av ) base of c.m. 1:6 on new surface or fixing on existing flooring by adhesive materials incl. desmentalling of existing flooring and jointed with colour cement slurry including finished with flush pointing and cleaning the surface etc. complete. c. antiskid 121 providing and laying marbo granite tiles 8mm. thick flooring over 20mm. thick base. a. dark shade 122 providing and laying marbo granite tiles 8mm. thick flooring over 20mm. thick base. b. light shade. 123 providing and laying marbo granite tiles 8mm. thick flooring over 20mm. thick base. c. antiskid 124 ceramic flooring tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick c.m. 1:3 finishing with flush pointing in white cement. ( incl. materials and labour ) 125 ceramic flooring tiles 8mm thick in steps and dado on 10mm thick cement plaster 1:3 and jointed with white cement. ( incl. materials and labour ) 126 providng and fixing extruded aluminium window having extruded aluminium colour anodized section frame main outer size 127 mm *38.10 mm *1.35mm ( of jindal section no.2443@wt.1.384 kg / mt ) , horizontal four track member size 122.20 mm* 31.75*1.10mm ( of jindal section:8787, @wt.1.205 kg / mt ) vertical member of size 122.20mm*31.75*mm*1.50mm ( of jindal section no:8935, @wt.1.398 kg / mt ) with sliding shutter of horizontal member size 40mm*18mm*1.29mm ( of jindal section no:8949@wt. of 0.456 kg / mt ) , vertical member of size 40mm*18 mm*1.29 mm ( of jindal section no:8947@wt. of 0.456 kg / mt / / section 8948, @ wt.0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 127 providing and fixing window having extruded aluminium colour anodized section fram main outer size 95mm*24 mm*1.17mm ( of jindal section no:2459@wt. of 0.738 kg / mt / ) horizontal three track member size 92mm*31.75mm*1.30mm ( of jindal section no:8688, @ wt.1.07 kg / mt ) , vertical member of size 92 mm*31.75 mm*1.50 mm ( of jindal section no:8933, @wt.1.06 kg / mt ) with sliding shutters of horizontal member size 40 mm*18 mm*1.29mm ( of jindal section no:8947@wt.of 0.456 kg / mt ) , vertical member of size 40mm*18mm*1.29mm ( of jindal section no:8949 @wt. of 0.456 kg / mt / with 5 mm th trasparent bronze colour tinted float glass with powerd coated aluminum fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc. 128 providing and fixing window having extruded aluminium colour anodized section fram main outer size 63.50mm*38.10 mm*1.95mm ( of jindal section no:4605, @ wt.1.094 kg / rmt ) , horizontal two track member of size 61.85 mm*31.75 mm*1.20 mm ( of jindal section no:8687, @wt.of 0.695 kg / mt ) , vertical member of size 61.85 mm*31.75mm*1.30mm ( of jindal section no 8758@ wt. of 0.0.659 kg / mt ) with sliding shutters horizontal member size 40mm*18mm*1.29mm ( of jindal section no:8949@wt. of 0.456 kg / mt ) , vertical member of size 4mm*18mm*1.29mm ( of jindal section no:8947@wt. of 0.456 kg / mt / section no:8948@wt. of 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 129 providing and fixing standared extruded of allumunium section of size 63.50*38.10*1.95 mm ( of jindal section no:4605@wt. 1.094 kg per rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for window. 130 providing and fixing window having extruded of alluminium section of size 63 mm*38.10mm*1.2mm ( jindal section:2434, @wt.0.643 kg per mt ) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for ventilation. 131 providing and fixing standared extruded of aluminium section of size 63.50*38.10*1.95 mm ( of jindal section no:4605, @ wt. 1.094 kg per rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for fix window. 132 providng and fixing extruded aluminium window having extruded aluminum colour powder coated section frame main outer size 127 mm*38.10 mm*1.35 mm ( of jindal sectio no:2443, @wt.1.384 kg / mt ) , horizontal four track member size 122.20 mm*31.75 mm*1.10 mm ( of jindal section no:8787, @wt.1.205 kg / mt ) , vertical member of size 122.20 mm*31.75 mm*1.50mm ( of jindal section no:8935, @wt.1.398 kg / mt ) with sliding shutters of horizontal member size 40 mm*18 mm*1.29mm ( of jindal section no:8949@wt. of 0.456 kg / mt ) , vertical member of size 40 mm*18 mm*1.29mm ( of jindal section no:8947@wt. of 0.456 kg / mt / section 8948, @wt.0.456 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to fram as per details etc complete for window. 133 providing & fixing window having extruded alluminium colour power coated section frame main outer size 95 mm*24 mm*1.17 mm ( of jindal section no:2459@wt. of 0.738 kg / mt ) , horizontal three track member size 92 mm*31.75 mm*1.30mm ( of jindal section no:8688, @wt.1.07 kg / mt ) , vertical member of size 92 mm*31.75mm*1.50 mm ( of jindal section no:8933, @ wt.1.06 kg / mt ) with sliding shutters of horizontal member size 40 mm*18mm*1.29mm ( of jindal section no:8947@wt. of 0.456 kg / mt ) , vertical member of size 40mm*18mm*1.29mm ( of jindal section no:8949@wt. of 0.456 kg / mt / with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc. 134 providing & fixing window having extruded aluminium colour power coated section frame main outer size 63.50*38.10*1.95 mm ( jindal section no:4605, @wt.1.094kg / rmt ) , horizontal two track member size 61.85 mm*31.75mm*1.20mm ( of jindal section no:8687@ wt. of 0.695 kg / mt ) , vertical member of size 61.85 mm*31.75 mm*1.30 mm ( of jindal section no:8758@wt. of 0.0.659 kg / mt ) , with sliding shutters of horizontal member size 40mm*18mm*1.29 mm ( of jinal section no:8949@wt. of 0.456 kg / mt ) , vertical member of size 40mm*18mm*1.29 mm ( of jindal section no: 8947@wt. of 0.456 kg / mt / section 8948, @wt.0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc. 135 providing and fixing standared extruded of aluminium section of size 63.50*38.10*1.95 mm ( of jindal section no:4605, @ wt. 1.094 kg / rmt with colour powder coated alluminium frame with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminiumframe for ventilation with 5 mm thick frosted glass as details etc complete for window. 136 providing and fixing standared extruded of aluminium section of size 63mm*38.10 mm*1.2mm ( jindal section no:2434, @wt.0.643 kg per mt with colour powder coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for ventilation. 137 providing and fixing standared extruded of aluminium section of size 63.50*38.10*1.95 mm ( of jindal section no:4605, @wt. 1.094 kg / rmt with colour powder coated alluminium fram with 5 mm thick transparent bronze colour tinted float glass as details etc complete for fix window 138 providing erecting and fixing double coated syntex or equivlent pvc. ( isi ) mark water tank of reqd capacity each with all necessary fittings & connection etc. comp on terrace. 139 pro. & fixing in expansion joint 100 mm thick sil flex ( capcell hd 100 ) expansion joint board of best quality and approved make incl. cutting to required size and shape at all levels etc. complete as directed. 140 provindg and lying and fixing 50 mm thick expansion joint by hydro cell semi rigid uy resistance with high performance laminated closed cell polythene foam joint filler in sheet foam as directed , etc. complete. 141 providing and laying and fixing 25 mm thick expansion joint by hydro cell semi rigid uv resistance with high performance laminated closed cell polythene foam joint filler in shet foam as directed, etc. complete. 142 applying and providing expansion joint sealing system on 100 mm vide joint tincluding cleaning of exansion joint by mechanical means provision of adhesive and flexible membrane with required bond length as per menufracturer specificaion and 4 mm thick alluminium strip covering with one side sloted and bolted with suitable system, inclusive of all manpower, machinery and meterial as per specification and as directed 143 providing and filling the expansion joint by thioflex 600 polymer or equivalent confirm to bs 4254 1983 as per required shade and manufactured specification by making groove of 50mm*12.5mm lather by cutting or by repairing groove and removing mortar drop or any other foreign materials incl.applying primer and filling required size ( oversize of joint pu foam etc. complete. 144 providing and filling the expansion joint by thioflex 600 polymer or equivalent confirm to bs 4254 1983 as per required shade and manufactured specification by making groove of 25mm*12.5mm lather by cutting or by repairing groove and removing mortar. 145 providing and fixing 25 cm wide & 3mm thick exterior composite panel in existing expansion joint horizontally & vertically with all material, hardware, acessories & fittings etc completed. 146 providing and fixing pre cast concrete kerb stone of gray cement based concrete block 30 cm length, 30 cm height and 15 cm thick of m250 grade concret as per approved design and icluding excavation for fixing in proper line and level, filling the joint with c:m 1:3 ( 1 cement:3 fine sand ) etc complete. 147 providing and fixing pre cast rubber dye inter locking concrete block 60 mm thick with grade of concrete m200 pnumatic compressed by mechanically pressed and as per approved design including 75 mm sand layer for levelling and filling the joint with sand in proper line and level etc complete 148 providing and fixing pre cast rubber dye inter locking concrete block 60 mm thick with grade of concrete m250 pnumatic compressed by mechanically pressed and as per approved design including 75 mm sand layer for levelling and filling the joint with sand in proper line and level. 149 providing and fixing 6 mm thick lexan polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50*3 mm etc complete as directed by engineer in charge. 150 finishing wall with weather proof exterior emulsion paint on wall surface ( two coats ) to give an required shape even shade after thoroughly brushing the surface to rempve all dirt, and remains of loose powdered materials etc complete. 151 applying two coats of birla or asian acrylic lappy ( purty ) and two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matterand sand papered smooth. 152 providing and laying broken chine mosaic flooring or terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or shape and tobe tempered to bring mortar creme out upto surface using....

Archaeological Survey Of India - Gujarat

29042250 mw (maint.) to bhadra tower besides the bhadra kali temple, ahmedabad, mw (maint.) to tomb of saiyed mubarak tomb, sojali, district kheda, mw(maint.) to sidi saiyyad mosque at ahmedabad and mw(maint.) to qutbuddin shah mosque at ahmedabad laying lime concrete bedding, laying of fine dressed/ machine cut sand stone flooring, laying plain cement concrete flooring at bottom of the vaju kund, applying 12 mm thick cement plaster work inside wall of the vaju kund etc. as mentioned in boq....

Road And Building Department - Gujarat

28986105 annual rates for m&r & minor original civil works items for various buildings under navsari ( r&b ) division, navsari 26. excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead. ( a ) loose of soft soil 27. excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead. ( b ) dense of hard soil 28. excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead. ( c ) hard murrum 29. excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead. ( d ) soft rock not requiring blasting 30. excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 meter lead. ( e ) hard rock 31. filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc. complete 32. filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering ramming and consolidating etc. complete. 33. filling in foundation and plinth with brick bats / chhara in layers of 20 cm thickness including watering, ramming and consolidating. 34. drilling of 200 mm dia bore in over burden strata in hard and rock information by dth rig including lowering of pipes and vertically and testing etc including testing with ben meter 35. drilling of bore in bard strata of 200 mm dia depth beyond 30 mt 36. providing and lowering of 150 mm dia pvc casting pipe in over burden strata as per is 4985 37. providing and lowering of 150 mm dia pvc slotted pipe etc complete 38. providing and fixing bore cap suitable to 150 mm ida ms pipe 39. supplying and installing submersible pumping set manufactured as per is standard including non return valve sluice valve flexible cable ( as required 70 mt length ) volt meter capacitor starter switch pressure gauge with accessories of approved manufacture tools of 5 0 hours power capacity. 40. providing and fixing check or non return pully wheel valve of 40 mm diameter 41. providing and fixing 50 mm dia. hdpe pipe of standard quality and make as approved by engineer in charge including jointing with submersible, lowering the same in bore with all necessary couplers atc. complete 42. hire charges of compressor for cleaning of bores including cost of operators fuel etc. complete 43. providing and laying cement concentrate 1:3:6 ( 1 cement : 3 coarse sand : 6 hand broken stone aggregates 40 mm nominal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth. 44. providing and laying cement concentrate 1:4:8 ( 1 cement : 4 coarse sand : 8 hand broken stone aggregates 40 mm nominal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth. 45. providing and laying cement concentrate 1:5:10 ( 1 cement : 5 coarse sand : 10 hand broken stone aggregates 40 mm nominal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth. 46. providing and laying brick bat cement concentrate 1:3:6 ( 1 cement : 3 coarse sand : 6 brick bats ) and curing complete excluding cost of form work in ( a ) foundation and plinth. 47. providing and laying brick bat cement concentrate 1:5:10 ( 1 cement : 5 coarse sand : 10 brick bats aggregates 40 mm nominal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth. 48. providing and laying cement concentrate 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth. 49. providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( a ) foundations, footings, base or columns and mass concrete ( upto 10 ton ) 50. providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( b ) slabs, landing, shelves, balconis , lintels, beams, girders and cantilever upto floor two level. ( upto 10 ton ) 51. providing t m t. bar reinforcement of fe 415 for r.c.c.work including bending binding and placing in position complete for all floo 52. extra for additional lift of concrete for all r.c.c. work above floor two level excluding cost of reinforcment ( more than 10 ton ) 53. brick work using common burnt clay building brick having crushing strength not less than 35 kg / sq.cm in foundation and plinth in cement mortar 1:6 ( 1 cement:6 fine sand ) ( b ) conventional 54. half brick masonary in common burnt clay building brick having crushing strength not less than 35 kg / sq.cm in foundation and plinth in cement mortar 1:4 ( 1 cement:4 coarse sand ) in foundation and plinth ( b ) conventional 55. providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( a ) foundations footings bases of columns etc. and mass concrete. ( upto 10 ton ) 56. providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( b ) flat surfaces such as soffits of supspened floors slabs landings and the like. ( 1 ) floors etc. upto 200 mm in thickness. ( upto 10 ton ) 57. providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( b ) flat surfaces such as soffits of suspended floor roof slabs landings and the like. ( 2 ) floors etc. above 200mm in thickness. ( upto 10 ton ) 58. providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( g ) columns pillarsposts and struts. ( 2 ) circular or curved in plan. ( upto 10 ton ) 59. brick work using fly ash bricks having crushing strength not less than 35 kg / sq.cm in foundation and plinth in cement mortar 1:6 ( 1 cement:6 fine sand ) ( b ) conventional 60. half brick masonary in fly ash bricks having crushing strength not less than 35 kg / sq.cm in cement mortar 1:4 ( 1cement: 4 coarse sand ) in foundation and plinth ( b ) conventional 61. providing and fixing 35 mm thick shutters for doors, windows and clearstorey windows including black enameled m.s. butt hinges with necessary screws, ( a ) indian teak wood ( i ) fully paneled 62. providing and fixing 35 mm thick shutters for doors, windows and clearstorey windows including black enameled m.s. butt hinges with necessary screws, ( a ) indian teak wood ( ii ) fully glazed 63. providing and fixing 35 mm thick shutters for doors, windows and clearstorey windows including black enameled m.s. butt hinges with necessary screws, ( a ) indian teak wood ( iii ) partly paneled and partly glazed 64. providing and fixing 35 mm thick shutters for doors, windows and clearstory windows including blackenamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( ii ) fully glazed. ( upto 10 ton ) 65. providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood. ( i ) fully panelled. ( upto 10 ton ) 66. providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood. ( ii ) fully glazed. ( upto 10 ton ) 67. providing and fixing flush door shutters first class hard wood with cross band and face veneer or plywood face panels, including anodized aluminium butt hinges with necessary screws. ( b ) non decorative type and block board core anodized aluminum butt hinges in flush door shutters. 68. providing and fixing 30 mm wire gauge shutter using galvanized m.s. wire of i.s. gauge designation 85 g with wire of 0.56 mm dia. for doors windows and clearstory windows including anodized aluminium butt hinges with necessary screws. ( a ) indian teak wood 69. providing and fixing decorative plywood 4mm thick in partitions including fixing to frames with screws etc, complete with 50mm x 12mm teak wood beading ( frames tobe paid separately ) ( upto 10 ton ) 70. providing and fixing modular partition full or low with 1.35 m or more with whole frame strcture of aluminium extruded alloy sectionss with all sections powder coated ( 50 micron ) having overall partition thickness 80 mm ( double skin ) flussh on both sides, including partly 5mm thick glass on top of counter with no serewing / chhanelling or gluing etc. visible 71. providing and fixing plaster of perish 12mm thick board ceilling pattern shape suggested by architect fixed with alluminium pipe 40mm x 25mm & main supporting 25 x 48 mm site with cornish etc, including necessary suspending including fixing in line and level & one coat of primer and two coats of oil painting etc. complete 72. providing and fixing single layer waterproof gypusm board 12.5 mm thick of the make newgood group co. ltd. or equivalent & newgood group co. ltd. company sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm suspended by g.i suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimetre chanel a of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for light fitting, diffuser etc. complete as per detail drawing as directed 73. 25 mm thick wooden shelves supported on 40 x 40mm x 6 mm t or l iron brackets fixed at suitable distances but not exceeding 75 cm. apart with mango wood or equivalent quality. ( upto 10 ton ) 74. providing and fixing m.s. grills of required pattern to wooden frames of windows etc. with m.s. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws ( a ) plain grill. ( upto 10 ton ) 75. providing and fixing fly proof galvanised m.s. wire gauge of i.s.l gauge designation 85 g. with wire of dia.0.56 mm to windows and celevating windows including 60 x 20mm beading of teak wood. ( upto 10 ton ) 76. providing and fixing 35 mm thick shutter for doors windows and clearstory windows including indian teak wood frames 10cm x 7 cm size including black enameled iron oxidized fixtures and fastening including primer coat of approved quality and two coats of oil painting etc. complete. ( i ) fully glazed 77. providing and fixing 35 mm thick shutter for doors windows and clearstory windows including indian teak wood frames 10cm x 7 cm size including black enameled iron oxidized fixtures and fastening including primer coat of approved quality and two coats of oil painting etc. complete. ( ii ) fully panelled 78. providing and fixing 35 mm thick shutter for doors windows and clearstory windows including indian teak wood frames 10cm x 7 cm size including black enameled iron oxidized fixtures and fastening including primer coat of approved quality and two coats of oil painting etc. complete. ( iii ) partly panelled and partly glazed 79. providing and fixing frp frame size 125x65 mm and 35 mm thick frp shutter for office and residence purpose. 80. providing and fixing frp frame size 100x50 mm and 28 mm thick frp shutter for office and residence purpose. 81. providing and fixing 28 mm thick fiber glass shutter with 1.5 to 2 mm thick fire extinguishing grade frp skin in depressed panel design for toilet purpose. 82. providing and fixing 35 mm thick fiber glass shutter with 1.5 to 2 mm thick fire extinguishing grade frp skin in depressed panel design for toilet purpose. 83. steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. ( a ) in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like. ( upto 10 ton ) 84. steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. ( d ) in trussses and trussed purlins, upto 25 m. span and 15 m ovarall height. ( upto 10 ton ) 85. providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm braced with vertical channels 20x5 mm size with top and bottom rails of t iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolt, nuts, locking arrangements, stoppers handles including applying a priming coat of red lead paint. 86. providing and fixing rolling shutters of approved make made of 80 mm wide m.s. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracked plates geode, channels and arrangements for inside and outside locking with push pull operation complete including the cost of hood cover and spring. ( a ) shutters having width below 3.5 meters. 87. providing and fixing rolling shutters of approved make made of 80 mm wide m.s. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracked plates geode, channels and arrangements for inside and outside locking with push pull operation complete including the cost of hood cover and spring. ( b ) shutters having width above 3.5 meters 88. providing and fixing hood cover for rolling shutters ( a ) shutters having width below 3.5 meters. 89. providing and fixing hood cover for rolling shutters ( b ) shutters having width above 3.5 meters 90. providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094kg / rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for fix window. 91. providing and fixing extruded aluminum window having extruded aluminum colour powder coated section frame main outer size 127mm x 38.10mm x 1.35mm ( of jindal section no:2443, @ wt.1.384 kg / mt ) , horizontal four track member size 122.20mm x 31.75mm x 1.10mm ( of jindal section no:8787, @ wt. 1.205 kg / mt ) , vertical member of size 122.20mm x 31.75mm x 1.50mm ( of jindal section no:8935, @ wt. 1.398 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt. 0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 92. providing and laying black mirrior polished granite stone slab cill / jams over 20 mm ( average ) base of cement mortar 1:6 ( 1cement : 6 course sand ) or l.m. 1:1:5 laid and jointed with grey cement slurry including rubbing and polishing complete ( a ) marble slab 18 mm thick. 93. providing and fixing window having extruded alluminium colour anodized section frame main outer size 63.50 x 38.10 x 1.95mm ( of jindal section no: 4605 @ wt. of 1.094 kg / rmt ) , horizontal three track member size 61.85mm x 31.75mm x 1.20mm ( of jindal section no: 8687, @ wt. 0.695 kg / mt ) , vertical member of size 61.85mm x 31.75mm x 1.30mm ( of jindal section no:8758, @ wt. 0.0.659 kg / mt ) wih sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no: 8949@ wt. of 0.456 kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no: 8947 @ wt. of 0.456 kg / mt section 8948, @ wt. 0.457 kg / mt ) with 5mm th. transparent bronze colour tinted float glass with powder coated alluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc. complete for window. 94. providing and fixing of pvc wall paneling and ceiling of approved and standard make with all material and labour 95. vertical blinds providing & supplying curtain of vertical blinds with runners, blind fabric, roller thread manual, powder coated channel with necessary fittings, fixtures & fastening for moving of blinds, etc., completed as per image and directed by the architect and approved by the engineer in charge. 96. providing & fixing parking shed using m s pipe of 50 mm dia minimum wt. 3.2 kg / rmt. in required shape and design including bending of pipe & fixing it in controlled c.c. m 150 foundation of required size including okne cost of primer & two coat of oil painting with all fixue and fastening and labour etc. complete as directed. 97. providing 2 mm th frp sheet as per instruction and fixing on fabricated shade with bolts or screws as per situation with necessary washer in given size and slope incl covering joints and ridge line with overlapping etc complete 98. providing and fixing sheet glass ordinary quality bedded in putty and fixed with and necessary cutting of glass. ( a ) 3 mm thick 99. providing and fixing sheet glass ordinary quality bedded in putty and fixed with and necessary cutting of glass. ( b ) 4 mm thick 100. providing and laying white glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finished with flush pointing in white cement. 101. providing and laying white glazed tiles 6 mm thick in skirting risers of steps and dedo on 10 mm thick cement plaster 1:3 ( 1cement : 3 coarse sand ) and joint with white cement slurry. 102. providing and laying marble stone slab flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1cement : 6 coarse sand ) or l.m. 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing complete. ( a ) marble slab 25 mm thick 103. providing and laying polished kota stone slab flooring over 20 mm ( average ) thick base of cement mortar 1:6 ( 1cement : 6 coarse sand ) or l.m. 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing etc complete. ( a ) 25 mm thick 104. providing and laying polished kota stone slab flooring over 20 mm ( average ) thick base of cement mortar 1:6 ( 1cement : 6 coarse sand ) or l.m. 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing etc complete. ( b ) 30 mm thick 105. providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with a floating coat of neat cement. ( a ) 40 mm thick 106. providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with a floating coat of neat cement. ( b ) 50 mm thick 107. p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for dark shade ( upto 10 ton ) 108. p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit ( upto 10 ton ) 109. p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade ( upto 10 ton ) 110. providing and fixing pre cast concrete kerb stone of gray cement based concrete block 30cm length, 30cm height and 15cm thick of m250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with c:m 1:3 ( 1cement:3fine sand ) etc complete. ( upto 10 ton ) 111. providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m250 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc complete. 112. providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall, clearing with water and oxalic acid etc. as directed. 113. providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) & jointed with white cement slurry. 114. providing corrugated g.i. sheet of class 3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses. ( 1 ) 0.80 mm thick sheet. ( upto 10 ton ) 115. providing asbestos cement sheets roofing fixed with g.i j or l hooks, bolts & nuts 8mm dia. c.i. plain and bitumen washer complete excluding the cost of purlins, fagters and trusses. ( a ) corrugated sheet ( i ) 7mm thick ( upto 10 ton ) 116. providing 15 mm thick cement plaster in single coat on brick / concrete wall for interior plastering upto floor two level finished even and smooth in ( i ) cement mortar 1:3 ( 1 cement:3 sand ) 117. providing 15 mm thick cement plaster in single coat on brick / concrete wall for interior plastering upto floor two level finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement:4 sand ) 118. providing 15 mm thick cement plaster in single coat on brick / concrete wall for interior plastering upto floor two level finished even and smooth in ( iii ) cement mortar 1:6 ( 1 cement:6 sand ) 119. 20 mm thick sand faced cement plaster on wall upto height 10 meters above ground level consisting of 12 mm thick backing coat on c.m. 1:3 ( 1 cement:3 sand ) and 8 mm thick finishing coat of c.m. 1:1 ( 1cement : 1 sand ) and 8 mm thick finishing coat of c.m. 1:1 ( 1 cement : 1 sand ) etc. complete. 120. white washing with lime on wall surface ( two coats ) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter. 121. distempering ( two coast ) with oil bound washable distemper of approved brand and manufacture and or required shade on wall surface to given an even shade over and including a primer coat with alkali resistance primer of approved brand after thoroughly brushing the surface to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and smooth. 122. finishing wall with water proofing cement paint on wall surface ( two coats ) to vie an approved brand and manufactures and of required shape even shade after thoroughly brushing the surface to remove all dirts, and remains of loose powdered materials 123. wall painting ( two coats ) with plastic emulsion paint of approved brand and manufacture on wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings & other foreign matter & sand papered smooth 124. applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 125. painting two coats ( excluding priming coat ) on new steel and other metal surface with enamel paint brushing, interior to give enamel paint brushing interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 126. extra over item 7 and 11 for every subsequent coat of paint 127. painting two coats ( excluding priming coat ) on new wood and wood based surface with ready mixed paint, brushing oil gloss semi gloss to give an even shade including cleaning of all dust, dirt and other foreign matter sand papering and stopping. 128. polishing with french polish on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filter. 129. polishing with french polish on previously polished wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filter. 130. appliying wax polish on new wood and wood surface with bees wax polish in proportion of 2:1.5 :1:0.5 ( 2 bees wax : 1.5 linseed oil : 1 turpentine even surface including cleaning the surface of all dirt dust and sand papered smooth. 131. painting lines, dashes, arrows, letter etc. on roads air fields and like in two coats with road marking paint brushing including cleaning the surface of all dirt, dust and other foreign matter. ( i ) over 10 cm in width 132. painting lines, dashes, arrows, letter etc. on roads air fields and like in two coats with road marking paint brushing including cleaning the surface of all dirt, dust and other foreign matter. ( ii ) upto 10 cm in width 133. finishing wall with weather proof exterior emulsion paint on wall surface ( two coats ) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 134. applying two coats of birla ( white cement based ) or asian ( acrylic lapy putty ) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 135. demolition and disposal of unserviceable materials with all lead and lift. ( i ) lime concrete. 136. demolition and disposal of unserviceable materials with all lead and lift ( ii ) un reinforced cement concrete 137. demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift ( i ) r.c.c. work 138. demolition of brick work and stone masonary including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift 139. dismantling tiled or stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. 140. dismentaling of sheet roofing including ridges, hips, valleys, gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) g.i.sheet roofing. 141. dismentalings cement asbestos hard board in ceiling or partition walls, wooden trellies work including trellies work including frames , stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 142. dismentling wood work, wrought framed and fixed in frames trusses including stacking the materials with all lead and lift. 143. dismantling doors, windows, ventilators etc. ( wood or steel ) shutters including chow hats, architraves, hold fasts and other attachment etc. complete and stacking them within all lead and lift. ( i ) not exceeding 3 sq.mt. in area 144. dismantling doors, windows, ventilators etc. ( wood or steel ) shutters including chow hats, architraves, hold fasts and other attachment etc. complete and stacking them within all lead and lift. ( ii ) exceeding 3 sq.mt. in area 145. dismantling c.i. pipes g.s.w. pipes and a.c. rain water pipes with fittings and clamps including stacking the materials with all leas and lift ( for any dia of pipe ) 146. dismantling sanitary fitting like wash basin, w.c. pan indian and european type flushing tank etc. including stacking the materials with all lead and lift. 147. scraping oil paint from steel and other metal surface and making the surface even ( with hand scraping. ) 148. providing and fixing m.s. fan clamps of shape and size as specified in existing r.c.c. slab including cutting chase and making good. 149. providing and fixing 1.20 metre high fencing with 2.0 metre long m.s. angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 mt, c / c. with five horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 kg. per 100 metre, strained and fixed to posts with g.i, staples including fixing the postsin ground with 0.5 m x 0.5.m x 0.5 m. block in c.c1:5:10 etc complete. 150. constructing a sink ( chowkedi ) with c.c. 1:2:4, 12cm. thick over b.b. masonry in c.m, ( 1:6 ) in front and dwarf wall 1.0 mt.high and 23 cm.thick cement plaster to masonry / in c.m.1:3 ) and cement concrete flooring in 1:2:4: mi x 5 cm. dia. drain pipe etc.complete. 151. constructing a cooking platform 60 cm. width and 70 cm high resting on b.b.masonry walls 23 cm.thick in c.m. ( 1:6 ) with ( i ) fixing or precast r.c.c.1:2:4 ) 8 cm. thick slab with marble chips set in c.m. ( 1:6 ) ( 6mm thick terrazo ) with plastering on exposed faces walls in c.m. ( 1:4 ) etc complete. 152. providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore tube fitting and clamps including making good the wall, ceiling and floor. ( a ) 15 mm dia. 153. providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore tube fitting and clamps including making good the wall, ceiling and floor. ( b ) 20 mm dia. 154. providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore tube fitting and clamps including making good the wall, ceiling and floor. ( c ) 25 mm dia. 155. providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore tube fitting and clamps including making good the wall, ceiling and floor. ( d ) 32 mm dia. 156. providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore tube fitting and clamps including making good the wall, ceiling and floor. ( e ) 40 mm dia. 157. providing and fixing to wall ceiling and floor galvanised mild steel tubes ( medium grade ) of the following nominal bore tube fitting and clamps including making good the wall, ceiling and floor. ( f ) 50 mm dia. 158. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( a ) 20 mm dia. 159. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( b ) 25 mm dia. 160. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( c ) 32 mm dia. 161. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( d ) 40 mm dia. 162. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( e ) 50 mm dia. 163. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( f ) 75 mm dia. 164. providing and fixing to wall ceiling and floor 6.00 kg / cm2 working pressure polythene pipes of the following outside dia low density pipes complete with special flange compression type complete with special flange compression type fittings, wall clips etc. including making good the wall, ceiling and floor. ( g ) 110 mm dia. 165. providing and fixing water closet squatting pan ( indian type w.c. pan ) size 580 mm ( earth work, bed concrete, foot rests and trap to be measured and paid for separately ) ( a ) vitreous chine ( i ) long pattern white colour 166. providing and fixing wash down water closet european type w.c. pan with integral p or s trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement : 1 fine sand ) ( seat and cover to measured and paid for separately ) ( i ) long pattern white colour 167. providing and fixing 12.5 litres low level flushing cistern with a pair, of c.i. or mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, c.p brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately ) ( a ) vitreous china ( i ) in white colour 168. providing and fixing plastic seat and cover for wash down water closet with c.p. brass hinges and rubber buffers. ( b ) black plastic seat and cover 169. providing and fixing wash basins with single hole for pillar tap with c.i. or m.s. brackets painted white including cutting holes and making good the same but excluding fittings. ( a ) vitreous chine ( ii ) flat back wash basin 550mm x 400mm size ( i ) white colour 170. providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ a ] 15 mm. 171. providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ b ] 20 mm. 172. providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ c ] 25 mm. 173. providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ d ] 32mm. 174. providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ e ] 40mm. 175. providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ f ] 50mm. 176. providing laying and jointing in true line and level 15mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 177. providing laying and jointing in true line and level 25mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 178. providing laying and jointing in true line and level 32mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 179. providing laying and jointing in true line and level 40mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 180. providing laying and jointing in true line and level 50mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 181. providing and laying ( two level or slopes ) and jointing with stiff mixture of cement mortar in proportion 1:1 salt glazed stone ware pipes following nominal internal diameters including testing of pipes and joints complete ( a ) 100 mm dia 182. providing and laying ( two level or slopes ) and jointing with stiff mixture of cement mortar in proportion 1:1 salt glazed stone ware pipes following nominal internal diameters including testing of pipes and joints complete ( b ) 150 mm dia 183. providing and laying cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) bedding for stone ware pipes of following internal diameters and necessary form work and curing complete. ( a ) 100 mm dia ( 112 mm avg. bed thickness ) 184. providing and laying cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) bedding for stone ware pipes of following internal diameters and necessary form work and curing complete. ( b ) 150 mm dia ( 166 mm avg. bed thickness ) 185. constructing brick masonary road gully chamber 50mm x 450 mm x 660 mm including 500 mm x 450 mm c.i. horizontal grating with frame complete. 186. constructing brick masonary for underground c.i. inspection chamber and bends with bricks having crushing strength not less than 35 kg / cm2 in c.m. 1:5 c.i. cover with frame ( light duty ) 445mm x 610mm internal dimensions total weight of cover with frame to be not less than 38 kg ( wt. of cover 23 kg and wt. of frame 15 kg ) r.c.c. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm size ) foundation concrete 1:5:10 inside plaster 15 mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( i ) inside dimension 455mmx610mm and 450 mm deep for single pipe line. 187. providing and filling in foundation with ordinary cement concrete m 100 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete. ( more than 10 ton ) 188. providing & casting in situ ordinary cement concrete m 100 mix and providing necessary pin headers including shuttering, scaffolding, laying, vibrating, curing and finishing complete without v groves. ( a ) height from 0.0 m. to 5.0 m. ( more than 10 ton ) 189. providing and fixing paver block of approved colour and design including fixing in average mm thick sand / stone dust bedding including ramming and fitting blocks in line and level with necessary compaction by vibrator etc. complete as directed. 190. providing and laying water proofing treatment in terrace including ( a ) applying neat cement slurry @ 2.75 kg. / sq. mt. of cement admixed with water proofing compound ( as per instruction of manufacturers ) after cleaning the surface. ( b ) laying of cement concrete using brick bats 25 to 100 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound over 20 mm thick layers of cement mortar 1:5 to required slope including rounding of junction of walls and slabs. ( c ) after two days of proper curing, applying second coat off cement slurry at the rate of 2.75 kg. / sq.mt. ( d ) finishing the surface with 20 mm thick cement mortar 1:4 and china mosaic tilling in white colour design pattern as shown by engineer in charge over 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) and finally finishing the surface with trowel with white cement slurry. ( e ) after finishing the whole terrace shall be flooded with water for a period of two weeks as directed for two weeks. 191. applying of two costs of 100% weatfer proof acrylic exterior paint for apcolite apex or equivalent of approved shed on wall surface of approved brand and manufacture and of required shed even shed after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. 192. providing and laying water proofing treatment including ( a ) cleaning the surface thoroughly remove dirt, dust, grease, oil & any other foreign materials including applying minor crack filler ( elastic polymer base silicon rubber of 100 gmt. / sq.mt. after crack filling first coat @ second coat off chemical silane blend ( acrylic polymer base flm with cement admixture in proportion 1:1 ( 1 kg chemical : 1 kg cement ) 3rd coat diff. water proofing pearl metallic pearl ( eimele type of paint ) silver colour acrylic base heat resistant water proof chemical including, applying chemical & paint etc. complete. 193. providing and fixing 80 mm thick ruboreous top pre cast locking cement concrete pavvers blocks of best quality approved by engineer in charge fixing in sand / stonedust 75 mm thick in line level etc. complete. 194. providing and laying water proofing treatment on terrace slab having existing ips flooring including ( a ) cleaning the surface thoroughly remove dirt, dust, grease, oil & any other foreign materials ( b ) applying one coat of zycosil diluted in distilled water in proportion 1:10 using paint brush or roller or spray equipment. ( c ) after two to three day of zycosil ( in ratio 1:1 ) on the dry surface by using a paint brush. ( d ) after finishing the whole treatment terrace shall be flooded with water for the period of two weeks as directed 195. providing and fixing alimunium standard extruded section paneled & partly glazed fixed type partition of aluminum section of 63.50 x 38.10 x 1.95 mm or as specified detailed drawing or as directed having panels of 12 mm thick both side exterior grade pre laminated particle board of approved make and shade including fixing in true line and level at bottom panel and 5 mm tinted glass at top panel including all fixtures and factenings like glazing clips rubber gasket and hardware and labour as required etc. compete. 196. providing and fixing partly glazed alluminium single cabin door with frame of powder coated alluminium section of size 63.50 mm x 38.10 x 3.18 mm ( 1.777 kg / mtr ) and shutter outer frame for size 44mm x 47 mm ( wt. 0.976 kg / mt ) and middle frame of size 101mm x 44 mm ( wt. 1.608 kg / mtr ) and 5 mm float 5 glass as top panel and 12 mm th. both side pre laminated particle board as bottom panel with necessary alluminium anodized fixtures and fastenings etc. completed as directed. 197. chipping & removing loose concrete cover etc.upto the steel rebar for beams , slabs colum by chisel and hammer , including scaffolding the place , etc. and cleaning away the debris as directed. 198. cleaning the scales of existing corroded reinf.with wire brush etc. to remove rust / scales etc. of existing col / beams / slabs, and treating the exposed steel bars of bi polar migratory concrete inhibitor ( epco kp 100 ) by spray over the concrete surface at coverage of 4.0 sq mt / lit. to be followed by rinsing the coated surface of residule material by clean water 199. guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per technical specification with wire mesh 50 mm x 50 mm x 3 mm wire etc.complete 200. providing and inserting nipples with approved fixing compound after drilling holes for grouting as per technical specifications including subsequent cutting / removal and sealing of the hole as necessary of nipples after completion of grouting with cement / epoxy 201. sealing of cracks / porous concrete by injection process through nipples / grouting complete as per technical specification. cement grout 202. jacketing 0.1 m. thick with m25 concrete with microconcrete polypropylene fibre polymer mortar and super plastisizer using 50% micro concrete +50% 1:1.5:3 concrete + 12 mm poly propylene fibre + super plastisizer with shuttering curing with all material and labour including removing loose concrete cleaning the surface with wire brush and applying anti corrosve liquid on reinforcement as instructed by engineer in charge including applying zinc rich primer and proper shuttering etc. complete. 203. 12 mm rebar excluding bar it should minimum 160 mm embedded in the concrete drill dia. should be minimum 24 mm for rebar material should be used will fischer fisv 360 or equivalent 204. 8 mm rebar for shear contractor excluding bar it should minimum 100 mm embedded in the concrete drill dia. should be minimum 14 mm for rebar material should be used will fischer fisv 360 or equivalent 205. carrying out timber treatment to all wood work including drilling holes and spraying oil based chemical solution on surface of timber work for termite control including labour and material etc. complete.using chlorpyriphos20 ec as per 6313 2013 part iii ( 1 % concentration by mass ) is recommended one litre chemical emulsion diluted with 19 litres kerosene. total diluted concentration will be 20 litres inclusive of 1 litre chemical emulsion application in drilled holes and 0.75 / litre chemical per one sqmt two coat on wood surface not protected by paint or varnish. 206. applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc complete. using imidacloprid 30.5 sc as per 6313 2013 part iii ( 1 % concentration by mass ) is recommended 10.5 ml chemical diluted with 5 litres of water application 0.5 litre chemical / sqm of surface is recommended as per i.s. 207. carrying out wall treatment for termite control including spraying with chemical solution in oil based including labour and material using chlorpyriphos 20 ec as per 6313 2013 part ii ( 1 % concentration by mass ) is recommended one litre chemical emulsion diluted with 19 litres oil base. total solution will be 20 litres inclusive of 1 litre chemical emulsion application at the rate of 7.5 litre chemical / sqmt of surface is recommended as per i.s. 208. anti termite system :providing and lying of permanent piping technology anti termite treatment before flooring work by installing lldp ( low linear density polyethylene ) tube of 8 mm o.d. & 6.4 mm i.d. with inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of 2 kg / cm2 and release rate of 1.9 ltr / hour fixed by p clips and nails. the lldp pipe shall be installed at the entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c / c distance ( adjust as per building layout ) & ends of loopp pass through a pvc elbow of minimum 32 mm i.d. at juction box andthe loops shall be terminate in juction boxex & test every juction during injecting chemicals for termite control treatment. the anti termite chemical imidacloprid 30.5 % sc mix as per is 6313 ( part iii ) shall be injected by the pressure pump diluted with water @ 10.5 ml / 5 ltr of water at the rate of 2 kg / sq.cm @ 5 ltr / smt. the contractor shall submit approved line plan for piping system and juction boxex dully approved by enginer in charge with bond of 5 year warranty. ( a ) permanent pipe system with junction boxex ( only pipe network ) 209. anti termite system :providing and lying of permanent piping technology anti termite treatment before flooring work by installing lldp ( low linear density polyethylene ) tube of 8 mm o.d. & 6.4 mm i.d. with inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of 2 kg / cm2 and release rate of 1.9 ltr / hour fixed by p clips and nails. the lldp pipe shall be installed at the entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c / c distance ( adjust as per building layout ) & ends of loopp pass through a pvc elbow of minimum 32 mm i.d. at juction box andthe loops shall be terminate in juction boxex & test every juction during injecting chemicals for termite control treatment. the anti termite chemical imidacloprid 30.5 % sc mix as per is 6313 ( part iii ) shall be injected by the pressure pump diluted with water @ 10.5 ml / 5 ltr of water at the rate of 2 kg / sq.cm @ 5 ltr / smt. the contractor shall submit approved line plan for piping system and juction boxex dully approved by enginer in charge with bond of 5 year warranty. ( b ) anti termite chemical injected area ( chemical injecting incl. labour cost ) 210. labour 211. mason 212. carpentor 213. chokidar 214. plumber 215. wireman...

Archaeological Survey Of India - Gujarat

28828839 mw (maint.) to bhadra tower besides the bhadra kali temple, ahmedabad, mw (maint.) to tomb of saiyed mubarak tomb, sojali, district kheda, mw(maint.) to sidi saiyyad mosque at ahmedabad and mw(maint.) to qutbuddin shah mosque at ahmedabad laying lime concrete bedding, laying of fine dressed/ machine cut sand stone flooring, laying plain cement concrete flooring at bottom of the vaju kund, applying 12 mm thick cement plaster work inside wall of the vaju kund etc. as mentioned in boq....

Nagar Palika Nigam - Gujarat

28064304 boriavi nagar palika area annual item rate for boriavi nagar palika vistar 1 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( a ) loose or soft soil 2 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( b ) dense or hard soil 3 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( c ) hard murrum 4 filling available excavated earth ( excluding rock ) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 5 filling in plinth with sand under floors including watering ramming, consolidating and dressing complete. ( executed with manual labour ) 7 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter meter lead. ( a ) loose or soft soil 8 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( b ) dense or hard soil 9 excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. ( c ) hard murrum 10 providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 crushed stone aggregates 20 mm nominal size ) and curing complete including cost of formwork in ( a ) wall caps / coping 11 providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork in ( a ) foundation and plinth 12 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( a ) foundations, footings, base or columns and mass concrete 13 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( b ) slabs, landing, shelves, balconis , lintels, beams, girders and cantilever upto floor two level. 14 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in ( d ) columns, pillars posts and struts upto floor two level. 15 providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) for reinforced concrete chhajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 ( 1 cement, 3 fine sand ) to give a smooth and even surface centering and formwork and curing complete excluding cost of reinforcement. 16 providing tmt bar fe 500 / 500d reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level 17 providing upto floor two level precast cement concrete jali or grill 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size ) inforced with 1.6 mm dia. mild steel wire including roughening, cleaning, fixing and finishing in cement mortar 1:3 and curing complete. ( d ) 75mm thick 18 providing upto floor two level precast cement concrete jali or grill 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size ) inforced with 1.6 mm dia. mild steel wire including roughening, cleaning, fixing and finishing in cement mortar 1:3 and curing complete. ( e ) 100mm thick 19 providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in ( a ) foundations, footings, base of columns and mass concrete 20 providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in ( b ) walls, from top of foundation level upto floor two level 21 providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in ©slabs, landing, shelves, balconies lintels, beams, girders and cantilever upto floor two level. 22 providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in ( d ) columns, pillars posts and struts upto floor two level. 23 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( ii ) slabs having more than 8 cm and upto 10 cm.thickness 24 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( iii ) slabs having more than 10 cm and upto 13 cm. thickness 25 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with curing etc. complete including the cost of formwork but excluding the cost of reinforsement for r.c.c work in ( iv ) slabs having more than 13 cm and upto 15 cm. thickness 26 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( a ) beams : ( ii ) having cross sectional area more than 0.08sq.m and upto 0.12 sq.m 27 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( a ) beams : ( iii ) having cross sectional area more than 0.12sq.m and upto 0.18 sq.m 28 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( b ) columns: ( ii ) having cross sectional area more than 0.08 sq.m and upto 0.18 sq.m 29 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( b ) columns: ( iii ) having cross sectional area more than 0.12sq.m and upto 0.18 sq.m 30 providing and laying in position ready mixed m 150 grade concrete for reinforced cement conctere work , using cement content as per approved design mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of r.m.c. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per is:9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer in charge. without fly ash ( min cement level as per latest is 456 shall be maintained ) ( cement level 320 kg ) 31 providing and laying in position ready mixed m 200 grade concrete for reinforced cement conctere work , using cement content as per approved design mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of r.m.c. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per is:9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer in charge. without fly ash ( min cement level as per latest is 456 shall be maintained ) ( cement level 400 kg ) 32 providing and laying in position ready mixed m 250 grade concrete for reinforced cement conctere work , using cement content as per approved design mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of r.m.c. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per is:9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer in charge. without fly ash ( min cement level as per latest is 456 shall be maintained ) ( cement level 450 kg ) 33 labour for ready mix with trimix vaccume dewatering process cement concrete all grade & curing comp. and finishing of cement concrete road by trimix process providing extra labour charge for trimix ( vaccume dewatering service ) process on cement concrete road surface by using vaccume dewatering pump floter surface vibrator incl. making groove cutting bituminous joint filler 8mm thick rough finish to surface as per instruction etc. comp. 34 providing and laying cement concrete 1:3:6 ( 1: cement:3 course sand : 6 crushed stone agg 40mm nomonal size ) & curing comp. excluding the cost of formwork in ( a ) foundation and plinth 35 providing and laying trimix vaccume dewatering process cement concrete m 200 & curing comp. and finishing of cement concrete road by trimix process providing extra labour charge for trimix ( vaccume dewatering service ) process on cement concrete road surface by using vaccume dewatering pump floter surface vibrator incl. making groove cutting bituminous joint filler 8mm thick rough finish to surface as per instruction etc. comp. 36 providing and doing upgradation of under ground drainage chamber including removing chamber cover and debris from chamber, cement concrete 1:2:4 and fixing cover and frame at road level as directed by eic ( circular chamber ( 600x600 ) 37 brick work using common burnt clay building bricks having crushing strength not less than 35 kg. / sq.cm. in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 fine sand ) ( b ) conventional 38 extra for brick work in superstructure above plinth level upto floor two level ( b ) conventional 39 brick work using common burnt clay building bricks having crushing strength not less than 35 kg. / sq.cm. in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 fine sand ) ( c ) fly ash bricks 40 extra for brick work in superstructure above plinth level upto floor two level ( c ) fly ash bricks 41 extra for brick work in superstructure above floor two level item no.2 ( 6.13 ) ( b ) conventional 42 extra for brick work in superstructure above floor two level item no. 2 ( 6.13 ) ( c ) fly ash bricks 43 ( i ) half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg / sq.cm. in cement mortar 1:4 ( 1 cement : 4 coarse sand ) in foundation and plinth ( b ) conventional 44 ( i ) uncoursed rubble masonry with hard stone of approved quality in foundations and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand including levelling up etc. complete 45 extra over item 7.6 for super structure above plinth level upto floor two level 46 coursed rubble masonry with hard stone of approved quality in foundations and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand ) etc. complete. 47 extra over item no. 7.17 for superstructure above plinth level upto floor two level 48 providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. and removal of the same for in situ reinforced concrete and plain concrete work in. ( c ) vertical surface such as walls ( any thickness ) partitions and the like including attached buttresses & string course & the like. 49 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) for r.c.c lintel including finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement. 50 providing wood work in frames of doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. ( a ) indian teak wood 51 providing and fixing 35 mm thick shutters for doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood ( ii ) fully glazed. 52 providing and fixing 35 mm thick shutters for doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. ( a ) indian teak wood ( iii ) partly panelled and partly glazed. 53 providing and fixing 35 mm thick shutters for doors, windows and clearstory windows including blackenamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( i ) fully panelled. 54 providing and fixing 35 mm thick shutters for doors, windows and clearstory windows including blackenamelled m.s. butt hinges with necessary screws. ( a ) indian teak wood. ( iii ) partly panelled and partly glazed. 55 providing and fixing m.s. grills of required pattern to wooden frames of windows etc. with m.s. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws ( a ) plain grill. 56 ( i ) providing and fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood work etc.complete. 57 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( i ) fully glazed. 58 providing and fixing 35 mm thick shutters for doors, windows and clerestory windows including indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. ( iii ) partly panelled and partly glazed. 59 steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. ( a ) in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like. 60 providing and fixing extruded aluminum window having extruded aluminum colour anodized section frame main outer size 127mm x38.10mm x 1.35mm ( of jindal section no:2443, @ wt.1.384 kg / mt ) , horizontal four track member size 122.20mm x 31.75mm x1.10mm ( of jindal section no:8787, @ wt. 1.205 kg / mt ) , verticalmember of size 122.20mm x 31.75mm x 1.50mm ( of jindal section no:8935, @ wt. 1.398 kg / mt ) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm ( of jindal section no:8949 @ wt.of 0.456kg / mt ) , vertical member of size 40mm x 18mm x 1.29mm ( of jindal section no:8947 @ wt.of 0.456kg / mt / section 8948, @ wt.0.457 kg / mt ) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. 61 providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm ( of jindal section no:4605, @ wt 1.094kg / rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window 62 providing and laying 40mm thick marble chips flooring rubbed and polished ( i.e. terrazo ) to granolithic finish with under layer 30mm thick cement concrete 1:2:4 ( 1 cement:2 coarse sand :4 graded stone aggregate 10 mm and down gauge ) and top layer 10mm thick with white, black or white and blak marble cihps of required sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 ( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4 cement:7 marble chips by volume ) ( a ) dark shade pigment with ordinary cement ( in top layer only ) 63 providing and laying 40mm thick marble chips flooring rubbed andpolished ( i.e. terrazo ) to granolithic finish with under layer 30mmthick cement concrete 1:2:4 ( 1 cement:2 coarse sand : 4 graded stone aggregate 10 mm and down gauge ) and top layer 10mm thick with white, black or white and blak marble cihps of required sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 ( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4 cement:7 marble chips by volume ) ( b ) light shade pigment with white cement ( in top layer only ) 64 providing and laying marble chips skirting ( terrazo ) or dedo rubbed, and polished to granolithic finish top layer 6mm thick with white, black or white and black marble chips of size from smallest to 4mm nominal size laid in cement marble powder mix 3:1 ( 3 cement :1 marble powder by weight ) in proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by volume ) 20mm thick with under layer 14mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) ( a ) dark shade pigment with ordinary cement ( in top layer only ) 65 providing and laying marble chips skirting ( terrazo ) or dedo rubbed, and polished to granolithic finish top layer 6mm white, black or white and black marble chips of size from smallest to 4mm nominalsize laid in cement marble powder mix 3:1 ( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by volume ) 20mm thick with under 14mm thick layer cement plaster 1:3 ( 1 cement : 3 coarse sand ) ( b ) light shade pigment with white cement ( in top layer only ) 66 providing and laying ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with flush pointing in white cement. 67 providing and laying ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with flush pointing in white cement. 68 providing and laying marbo grenite tiles 8 to 10 mm thick , 24 x 24 in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with flush pointing in white cement. 69 providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) and jointed with white cement slurry 70 providing and laying 40mm thick marble chips flooring rubbed and polished ( i.e. terrazo ) to granolithic finish with under layer 30mm thick cement concrete 1:2:4 ( 1 cement:2 coarse sand :4 graded stone aggregate 10 mm and down gauge ) and top layer 10mm thick with white, black or white and blak marble cihps of required sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 ( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4 cement :7 marble chips by volume ) ( d ) white cement without any pigment ( in top layer only ) 71 providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) and jointed with white cement slurry 72 providing and laying marbo grenite tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand ) and jointed with white cement slurry 73 providing and laying polished kota stone slab flooring over 20mm ( average ) thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) or l.m. 1.1.5 ( 1 lime putty :1.5 coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. ( a ) 25mm thick 74 providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) laid in one layer and finished with a floating coat of neat cement. ( a ) 40mm thick. 75 providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) laid in one layer and finished with a floating coat of neat cement. ( b ) 50mm thick. 76 p & l 24 x 24 vitrified 8 mm thick tile flooring over 20 mm ( average ) base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for dark shade 77 providing and fixing pre cast concrete kerb stone of gray cement based concrete block 30cm length, 30cm height and 15cm thick of m250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with c:m 1:3 ( 1cement:3fine sand ) etc complete. 78 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m200 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc complete. 79 providing and fixing pre cast rubber dye inter locking concrete block 60mm thick with grade of concrete m250 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc complete. 80 providing 15mm thick cement plaster in single coat on rough ( similar ) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement :4 sand ) 81 providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement : 4 sand ) 82 extra over items 58 to 64 for finishing with a floating coat of neat cement slurry. ( upto 10 ton ) 83 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of c.m. 1:3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of c.m. 1:1 ( 1 cement : 1 sand ) etc. complete. 84 providing cement vata ( 10cm. x 10 cm. size ) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. 85 white washing with lime on wall surface ( two coats ) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter. 86 distempeing ( two coats ) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. 87 distempeing ( two coats ) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth. 88 finishing wall with water proofing cement paint of on wall surfaces ( two coats ) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. 89 wall painting ( two coats ) with plastic emulsion paint of approvedbrand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 90 extra over item 57 for every subsequent coat of wall painting with plastic emulsion pain of approved brand. 91 applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 92 demolition and disposal of unserviceable materials with all lead and lift. ( i ) lime concrete. 93 demolition and disposal of unserviceable materials with all lead and lift. ( i ) lime concrete. 94 demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) r.c.c. work 95 demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) in lime mortar. 96 demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( ii ) in cement mortar. 97 dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 98 dismentaling of sheet roofing including ridges, hips, valleys, gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( i ) g.i.sheet roofing. 99 dismentaling of sheet roofing including ridges, hips, valleys, gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. ( ii ) a.c. sheet roofing. 100 dismentalings cement asbestos hard board in ceiling or partition walls, wooden trellies work including trellies work including frames, stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 101 dismentling doors, windows, ventilators etc. ( wood or steel ) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. ( i ) not exceeding 3 sq.m. in area. 102 dismentling c.i. pipes g.s.w.pipes abd a.c. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of pipe ) 103 dismantling santtary fittings like wash basin . w.c. pan indian and european type, flushing tank etc. including stacking the materials with all lead and lift. 104 removing and scraping of old deteriorated plaster of any thickness fromm wall / r.c.c member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift 105 carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with i.s.i specification. using chlordene and chiorpurfiles 20 ec. as per 6131_paret ii consentration weight one percent is recommended i.e one litre 20 ec chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 litre chemical / sqm of surface is recommended as per i.s 106 providing and fixing rajula stone 75mm thick 60mm x 45mm size including fixing in cement mortar as directed. 107 providing erecting and fixing double coated syntex pvc. ( isi ) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. 108 providing and fixing to wall ceiling and floor 6.0 kg. f / cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor. ( b ) 25mm 109 providing and fixing cast iron ( spun ) nahni trap of the following nominal diameter of self cleaning design with c.i. screaed down or higned grating luding cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. ( c ) 100mm dia. 110 providing and fixing water closet squatting pan ( indian type w.c. pan ) size 580mm ( earthwork, bed concrete, foot reste and trap to be measured and paid for separately ) ( a ) vitreous china. ( i ) long pattern = white colour 111 providing and fixing wsh down water closet ( european type, w.c. pan ) with integral p or s trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement : 1 fine sand ) ( seal and cover to be measured and paid for separately ) ( a ) vitreous china pattern : ( i ) in white colour 112 providing and fixing in cement mortar 1:3 ( 1 cement : 3 coarse sand ) a, pair of white vitreous china 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet. 113 providing and fixing g.i. inlet connection for flush pipe with w.c. pan 114 providing and fixing plastic seat and cover for wash down water closer with c.p. brass hinges and rubber buffers. ( b ) black plastic seal and cover. 115 providing and fixing washbasin with single hole for pillar tap with c.i. or m.s. brackets painted white including sutting holes and making good the same but excluding fittings. ( a ) vitreous china: ( ii ) flat back washbasin 550 mm x v 400mm size. ( i ) in white colour. 116 providing and fixing c.p. brass waste for washbasin or sink. ( a ) 32mmdia. 117 providing and fixing m.i. fisher union for washbasin or sink. ( a ) 32mm dia. 118 providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick a.c. sheet or plywood sheet and fixing to wooden pluge with c.p. brass screws and washers. 119 providing and fixing screw down bib taps of following size. ( a ) brass screw down bib tap polished bright. ( i ) 15mm dia. 120 providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. ( i ) 15mm dia. 121 providing and fixing brass screw down stop tap. ( a ) 15mm dia. 122 providing and fixing gun metal check or nonreturn fullway wheel valve. ( a ) 15mm dia. 123 providing and fixing gun metal check or nonreturn fullway wheel valve. ( b ) 20mm dia. 124 providing and fixing gun metal check or nonreturn fullway wheel valve. ( c ) 25mm dia. 125 providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete. ( ii ) 25mm dia. 126 providing and fixing urinal of approved quality including connection with trap and with integral longitudinal flush pipe. ( a ) squating plate pattern white earthenware 550mm x 300mm. 127 providing and fixing c.i. manhole cover 0.60 m. x 0.45m. size having weight not less than 35kg. 128 providing and fixing g.i. rain water spout of 50mm dia. and 30cm. length. 129 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ a ] 15 mm. 130 providing and fixing concealed center point to wall ceiling & floor cpvc ( sdr 13.5 ) pipe having national sanitation foundation ( nsf ) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [ c ] 25 mm. 131 providing laying and jointing in true line and level 15mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 132 providing laying and jointing in true line and level 25mm dia. u.p.v.c. pipe ( sch 40 ) for cold water including fittings make prince / supreme / astral / finolex or equivalent as approved by engineer in charge. pipe shall be fixed on the wall with the help of clamp at every two metre c / c or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 133 providing and fixing pvc swr nahni trap is 14735 for drain 100 mm diameter with jali of the following nominal diameter of self cleansing design with c.i scread down or hinged grating including the cost of cutting and making good the walls. 134 providing and fixing pvc swr nahni trap is 14735 for drain 75 mm diameter with jali of the following nominal diameter of self cleansing design with c.i scread down or hinged grating including the cost of cutting and making good the walls. 135 providing and laying ( to level or slopes ) and jointing with stiff mixture of cement mortar in proportion 1:1 selt glazed stoneware pipes including testing of pipes and joints complete. ( a ) 100mm dia. 136 providing and laying ( to level or slopes ) and jointing with stiff mixture of cement mortar in proportion 1:1 selt glazed stoneware pipes including testing of pipes and joints complete. ( b ) 150mm dia. 137 providing and fixing s.w. gully trap with c. grating brick masonry chamber and water tight c.i. cover with frame of 300mm x 300mm size ( inside ) with standard weight. ( i ) square mouth traps. ( b ) 150mm x 100mm size p or r type 138 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( b ) 150mm 139 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( c ) 250mm 140 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( d ) 300mm 141 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( e ) 450mm 142 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( f ) 500mm 143 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( g ) 600mm 144 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( h ) 900mm 145 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( k ) 1000mm 146 providing laying ( to level or slopes ) and jointing reinforced concrete light duty non pressure pipes i.s. class np2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. ( m ) 1200mm 147 constructing manhole with r.c.c. top slab in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 + 50mm size ) inside plastering 15mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size ) finished smooth complete including curing and festing ( i ) inside size 900mm x 1200mm and 1.5m. deep including c.i. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. ( wt. of cover 64 kg. and wt. of frame 64 kg. ) ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 1 ) a type depth 0.90 metre for 150mm diameter sewer. 148 constructing manhole with r.c.c. top slab in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 + 50mm size ) inside plastering 15mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size ) finished smooth complete including curing and festing ( i ) inside size 900mm x 1200mm and 1.5m. deep including c.i. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. ( wt. of cover 64 kg. and wt. of frame 64 kg. ) ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 2 ) b type depth 1.50 metre for 150mm diameter sewer. 149 constructing manhole with r.c.c. top slab in 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 + 50mm size ) inside plastering 15mm thick with cement mortar 1:5 ( 1 cement : 5 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 coarse sand :4 stone aggregate 20mm nominal size ) finished smooth complete including curing and festing ( i ) inside size 900mm x 1200mm and 1.5m. deep including c.i. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. ( wt. of cover 64 kg. and wt. of frame 64 kg. ) ( a ) with 230mm thick walls of brick msonry using brick having crushing strength not less than 35kg. / sq.cm. in cement mortar 1:5 ( 1 cement: 5 coarse sand ) ( 3 ) c type depth 2.25 metre for 150mm diameter sewer. 150 constructing brick masonry chamber for underground c.i. inspection chamber and bends with briocks having croshing strength not less than 35kg. cm2 in c.m. 1:5 c.i. cover with frame ( light duty ) 455mmx 610mm intenal dimensions total weight of cover with frame to be not less than 38kg. ( wt. of cover 23 kg. ) and wt. of frame 15kg. ) ( r.c.c. top slabe with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm size ) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( i ) inside dimensions 455mmx 610mm and 450mm deep for single pipe line. 151 constructing brick masonry chamber for underground c.i. inspection chamber and bends with briocks having croshing strength not less than 35kg. cm2 in c.m. 1:5 c.i. cover with frame ( light duty ) 455mmx 610mm intenal dimensions total weight of cover with frame to be not less than 38kg. ( wt. of cover 23 kg. ) and wt. of frame 15kg. ) ( r.c.c. top slabe with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm size ) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. ( ii ) inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets. 152 box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50mt.lead. 153 preparing surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc. ( ii ) black top surface. 154 supplying and fixing reinforced concrete heavy duty non pressurepipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( 300mm dia. 155 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( 450mm dia. 156 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( iii ) 600mm dia. 157 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( 800mm dia. 158 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( 900mm dia. 159 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( 1100mm dia. 160 supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts including setting and joining the pipes in c.m. 1:2 watering and laying ( to level or slope ) of i. class np2 of following internal diameters. ( vii ) 1200mm dia. 161 providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and between returns directed. 162 excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed. ( a ) depth upto 3.0 m.and lead upto 100m for 10 cum 163 providing and filling in foundation with ordinary cement concrete m 100 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete. 164 providing and casting in situ ordinary cement concrete m 150 for r.c.c. raft and cut off walls including necessary shuttering laying, vibrating, ramming and curing complete. 165 providing and casting in situ ordinary cement concrete m 200 for r.c.c. raft and cut off walls including necessary shuttering laying, vibrating, ramming and curing complete. 166 extra for providing khanki facing over coursed rubble stone masonry for sub structure including raking out joints, cement pointing in cement mortar 1:1 and curing complete. 167 clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials ( a ) by manual means in area of light jungle 168 clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials ( b ) by manual in area of thorny jungle 169 clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials ( c ) by mechanical means in area of light jungle 170 clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials ( d ) by mechanical means in area of thorny jungle 171 providing and laying compacted w.b.m. 200 mm. thick on b.t. crushed metal 40mm. size including spreading using 25% sand as filler in layer including spreading watering and consolidation using power roller etc. complete. 172 providing and laying wetmix base coarse macadam 200 mm thick in required layer using machine crush chips as per required gradation mixing with required optimum quantity of water and spreading in to grade & camber in with mechanical paver consolidation wit 173 providing and laying asphalt painting on b.t. surface with bitumen grade 60 / 70 ( vg 30 ) @ 5.00 kg / 10 sqmt by mechanical sprayer and spreading the fine sand on prepared surface at the rate of 0.03 cum / 10 sqmt including brushing etc. complete 174 providing and laying built up spray grout 150 mm thick compacted with asphalt vg 30 ( 60 / 70 ) grade @1.99% by total weight of premix for mixing and 4 kg / 10 sq.mt. of bitumen is 8887 ( rapid setting ) for tack coat and including b.t. chips of required morth gradation including cleaning and heating asphalt premix material by contractors drum mix plant machinery in proper graduation and laying with paver finisher and consolidation as per morth specification including cost of all materials, asphalt, fuel, oil, lubricants, aggregate, labour charges, royalty charges etc. complete as directed. 175 providing and laying 50 mm thick compacted bituminous macadam using b.t chips ( as per most required duration ) and mixing binder asphalt of grade vg 30 ( 60 / 70 ) at rate of 3.40% by total weight of premix and using emulsion rs 1 for tack coat @ 2.5 kg / 10sqmt and mixing by contractors own drum mix plant & machinery and laying by paver finisher including consolidation with vibratory roller 8 to 10 tonne etc. and providing and operating plant machinery fuel , oil, lubricant, cost of all materials and labour charges including flushing stone dust and existing road surface cleaning by mechanical means etc. complete 176 providing and laying 25 mm thick semi dense bituminous concrete using crushed stone b.t. chips as per required morth graduation and using asphalt grade vg 30 ( 60 / 70 ) for making at 5% by total weight of mix using drum mix plant and using emulsion rs 1 as per is 8887 for tack coat @ 2.5 kg / 10sqmt including heating the asphalt and aggregates by continuous drum mix plant, transportation the mix and spreading the same by paver finisher and consolidation as per morth specification including fuel, oil, lubricants, labour, materials & labour charges of flushing stone dust and existing road surface cleaning by mechanical means etc. complete. 177 road marking with hot applied thermoplast compound with reflectorising glass beads on bitumineous surface and laying of hot applied thermostatic compound 2.5mm thick including reflectorised glass beads @ 250 grams / sq.mt. area, thickness of surface applied glass beads as per irc 35. the finished surface to be level uniform and free form streaks and holes. 178 supplying and fixing cat eye ( stimsonite ) made out from acrilo beautile sterine injuction high compressed molding with reflector made of mmc ( prismatic type of size 12cm x 6cm 2.5cm ) provided with bituminous adhesive 100g. with each unit for fixing. ( high intensity grade ) 179 construction of granular sub base naturally available material of ( 26.50 to 9.50 mm ) size 35%, ( 9.50 to 2.36 mm ) size 25 % and mix with sand or equivalent finer particle at 40 % ( below 2.36 mm size ) so as provide well graded grade ii material, spreading in uniform layers on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory rollers of 80 to 100 kn static weight to achieve the desired density, complete as per technical specification clause 401 for grading machined in table 400.1 ( cbr 20 or more ) ( i ) for grading ii material 180 resetting the rough chiselled dressed floring stones on average 10cm thick sand bed and filling the joints with 1:2 and curing etc. complete including labour charges for dismentalling, laying and required materials like cement, sand etc. 181 labour charges of laying paver blocks and 10 cm sand beding and mechanicaly completed by using vibrator. 182 supplying coloring precast rcc benches laid with including carting, loading, unloading and all taxes etc complete. ( as per drawing, approve quality & instruction of in charged engineer. ) in various area of godhra nagarpalika 183 providing and laying cement concrete 1:4:8 ( cement : 4 course sand :8 crushed stone agg 40mm nomonal size ) and curing complete excluding cost of form work in ( a ) foundation and plinth 184 providing and laying cement concrete m 200 and curing complete including cost of form work and reinforcement for reinforced cement concrete work in ( b ) slab, landing shelves, balconies, linteles, beam, girders and centiever up to floor two level ( do for bottam slab ) 185 providing and laying cement concrete m 200 and curing complete including cost of form work and reinforcement for reinforced cement concrete work in ( b ) slab, landing shelves, balconies, linteles, beam, girders and centiever up to floor two level ( do for top slab ) 186 providing and laying cement concrete m 200 and curing complete including cost of form work and reinforcement for reinforced cement concrete work in ( k ) vertical and horizontial its up to floor two level ( vertical wall ) 187 wall: providing and laying controlled cement concrete m 200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in vertical and horizontial its upto floor two level. 188 direction sign ( junction board ) : providing and fixing sign boards made out of 2mm aluminium sheet; size 244 x 122cms. rectangle as as per the design of irc 67 1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest m.o.s.t. specifications; letters and numerals should be as per irc 30 1968, 3.1m long ( 2 nos ) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. the fixing at site shall be in 1:2:4 cc block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge. ( a ) engineer grade 189 village name / bump ahed sign : providing and fixing sign boards made out of 2mm aluminium sheet; size 90 x 60cms. rectangle as as per the design of irc 67 1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest m.o.s.t. specifications; letters and numerals should be as per irc 30 1968, 3.1m long ( 2 nos ) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. the fixing at site shall be in 1:2:4 cc block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge. ( a ) engineer grade 190 cautionary warning sign : providing and fixing sign boards made out of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of irc 67 1977. pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest m.o.s.t.specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with bestquality epoxy coatings in black andwhite bends. the details of symbol foreach board shall be as per theinstruction of engineer in charge. the fixing at site shall be in 1:2:4 cc blockof size 45 x 45 x 60 cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. ( a ) engineer grade 191 informatory signs : providing and fixing sign boards made out of 2mm aluminium sheet; size 80 x 60cms. rectangle as per the design of irc 67 1977 pre treated with phospheting process & acid teching; coated with one coat of epoxyprimer and two coats of best qualityepoxy paint; reflectorised with retro refiective sheeting as per latest m.o.s.t. specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm as required; painted with best qualityepoxy coatings in black and whitebends. the details of symbol for eachboard shall details of symbol for eachboard shall be as per the instruction ofengineer in charge. the fixing at site shall be in 1:2:4 cc block of size 45 x45 x 60cms. for each leg. including excavation curing tec. complete under the supervision of engineer in charge. ( a ) engineer grade 192 hazard mark signs :providing and fixing sign boards made out of 2mm aluminium sheet; size 90 x 30cms. rectangle as as per the design / drawing attached ( irc ) pretreated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest m.o.s.t. specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x 50 x 5mm painted with best quality epoxy coatings the fixing at site shall be in 1:2:4 cc block of size 45x45x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge. ( a ) engineer grade input material 1 cement 2 t.m. t bars fe 415 3 water proofing materials 4 white cement 5 marble powder 6 fiber insulation board ( i ) 12 mm thick ( ii ) 18 mm thick ( iii ) 25 mm thick 7 playwood sheet 9 mm thick 8 playwood sheet 6 mm thick 9 distemper primer 10 dry distemper 11 oil bound distemper 12 water proofing cement 13 plastic emulation paint 14 enamel paint 15 bituminuous paint 16 enamel primer 17 sprit 18 bees wax 19 linseed oil 20 turpentine oil 21 white paint 22 ready mixed red lead paint 23 urinal ( i ) flat back ( ii ) squatting type 24 white vitreous china wc squatting pan ( indian type 580 mm size ) 25 white vitreous china wc washdown wc ( european ) 26 white vitreous china footrest for wc 27 white vitreous 100 mm p or s trap 28 12.5 liter level white vitreous flushing cistern with cp brass handlw etc. 29 12.5 liter high level ci flushing cistern with fittings. 30 black plastic seat with cover with cp brass hinges and rubber buffer white vitreous china. 31 flat back wash basin 550 mm x 400 mm 32 white vitreous china sink 600 mm x 450 mm x 150 mm 32 s.w. gulley trap 150 mm x 100 mm size 32 ci cover i ) 300 mm x 300 mm ii ) 455 mm. x 610 mm iii ) 500 mm x 700 mm iv ) 600 mm x 850 mm 33 ci cover for manholes 34 soft brushes 35 thickwire brushes 36 ordinary km stone ( for odr and vr 37 ordinary km precast r.c.c. stone ( for odr and vr ) 38 ordinary km stone ( for nh, sh & mdr ) 39 ordinary km precast r.c.c. stone ( for nh, sh & mdr ) 40 5th km stone as irc type design 41 5th km precast r.c.c. stone as irc type design 42 indicator stone as per type design 43 indicator stone as per rcc type design 44 ms road sign board i ) non reflective type ii ) reflective type ms village name board or junction board marble year plate 20 cm x 15 cm x 2.50 cm marble number plate 45 is class np 2 rcc heavy duty non pressure pipe i ) 300 mm ii ) 450 mm iii ) 600 mm iv ) 750 mm v ) 900 mm vii ) 1200 mm 46 is class np 3 rcc heavy duty non pressure pipe as per indian railway standard specifications i ) 300 mm ii ) 450 mm iii ) 600 mm v ) 900 mm vii ) 1200 mm viii ) 1400 mm ix ) 1600 mm xi ) 1800mm 47 pvc pipe 10 kg / sqcm i ) 20 mm dia ii ) 25 mm dia iii ) 32 mm dia iv ) 40mm v ) 50 mm dia vi ) 75mm dia vii ) 110mmdia 48 pvc pipe 6 kg / sqcm i ) 20 mm dia ii ) 25 mm dia iii ) 32 mm dia iv ) 40 mm dia v ) 50 mm dia vi ) 75 mm dia vii ) 110 mm dia 49 welding charges 50 rajula stone ( size to be measured ) 51 fine sand 52 coarse sand 53 hand broken aggregate ( i ) 90mm to 25 mm size ( ii ) 63 mm to 40 mm size 54 crushed stone aggregate 20mm. size crushed stone aggregate 40mm. size crushed stone aggregate 10mm. size crushed stone aggregate 10mm.to20mm size ( a ) crushed stone aggregate 6mm.to10mm size ( b ) crushed stone aggregate 40mm. to 63mm size 55 brick aggregates 40 mm size 56 brick aggregates 20 mm size 57 burnt clay bricks. ( i ) conventional ( iii ) modular 58 rubble 59 rubble heavy ( weight not less than 40 kgs. ) 60 murrum / brinders material 61 bricks aggregate 20mm size 62 bricks aggregate 40mm size 63 screened rounded gravel 10mm. 64 screened rounded gravel 20mm. 65 unscreened gravel 66 hard murrum 67 stone dust 68 quarry spall 69 white bela stone 70 granite slab ( 18mm thick ) one side polished 71 ceramic vetified flooring tiles input labour 1 mazdoor ( male ) 2 mazdoor ( female ) 3 bhisti 4 mate 5 excavator 6 breaker 7 hole driller 8 chowkidar 9 mason ( 1st class ) 10 mason ( 2nd class ) 11 bandhani 12 carpenter ( 1st class ) 13 carpenter ( 2nd class ) 14 mistry 15 blacksmith ( 1st class ) 16 blacksmith ( 2nd class ) 17 welder 18 fitter 19 glazier 20 painter 21 white washer 22 polisher 23 plumber 24 plumber ( fitter ) asstt. 25 spraymen 26 hand craft with mazdoor 27 crane man with helper 28 extra labour for sinking and chiselling 29 superviser for machinery 30 winch operator 31 compressor operator...

Gujarat State Electricity Corporation Limited - Gujarat

27756308 tender for various civil works in colony at gtps. 117 1 excavation for foundation upto 1.5 m. depth including sorting out and stacking of useful materials and disposing of excavated stud up to 50m. lead. ( b ) dense or hard soil 2 filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. 3 demolition of r c c work including stacking of serviceable materials and disposal of unserviceable materials with all lead & lift. 4 demolition of r unreinforced concrete work including stacking of serviceable materials & disposal of unserviceable materials with all lead & lift. 5 demolition of brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead & lift. 6 brick work using common fly ash bricks having crushing strength not less than 50 kg. / sq.cm in foundation and plinth in cement mortar 1:6 ( 1 cement: 6 fine sand ) in foundation & plinth . 7 brick work using common fly ash bricks having crushing strength not less than 50 kg. / sq.cm. above plinth level up to floor two level in cement mortar 1:6 ( 1 cement: 6 fine sand ) 8 providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse sand :8 hand broken stone aggregates 40 mm nominal size or crushed stone aggregate ) and curing complete excluding cost of form work in : ( a ) foundation and plinth 9 providing & laying cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size ) laid in one layer finished with a floating coat of neat cement ( b ) 50 mm thick 10 providing 15 mm. thick cement plaster in single coat on brick / concrete walls for interior plastering up to floor two level finished even and smooth including floating coat of neat cement slurry in cement mortar 1 : 3 ( 1 cement : 3 sand ) 11 providing 20 mm thick cement plaster in double coat on wall up to 10 meter above ground level consisting of 12 mm thick backing coat of c m 1;3 ( 1cement : 3 sand ) and 8mm thick finishing coat of c m 1:1 ( 1 cement : 1 sand ) etc complete 12 providing and applying two coats of washable interior emulsion paint ( excluding priming coat ) of approved brand and make as mentioned below on surface to give an even shade including finishing and thinning as per manufacture’s specification after thoroughly cleaning the surface free from mortar dropping and other foreign matter. item includes very minor touching with lapis whenever required making the surface even and smooth by sand paper. a gap of 6 hours should be given between two subsequent coats. rate are inclusive of all the material and laborers and scaffolding work, cleaning of the floors etc. required for the work. basic rate including taxes per liter rs 280.00 ) ( 1 ) asian paint – premium emulsion. ( 2 ) nerolac paint lotus touch ( 3 ) ici dulux ( akzo nobel ) ici dulux 3 in 1 ( 4 ) berger paint – easy clean. ( 5 ) growel super acroplast plastic emulsion paint 13 providing and applying two coats of exterior premium emulsion paint ( excluding priming coat ) of approved brand and make as mentioned below on existing plastered surface including finishing and thinning as per manufacture’s specification. a gap of 6 hours should be given between two subsequent coats. the work should be carried out strictly as per manufacturer’s specification and requirement including scaffolding jhoolas, etc. complete as directed by e.i.c. basic rate including taxes per liter rs 280.00 ) ( 1 ) asian paint – apex ultima ( 2 ) nerolac paint excel total ( 3 ) ici dulux ( akzo nobel ) weathershield max ( 4 ) berger paint – weather coat allguard 14 providing and applying two coats of synthetic enable paint ( excluding priming coat ) on new / existing structural steel and other metal surface of approved brand and make as mentioned below, up to any height with all tools, tackles and risk of accident. the rate is inclusive of labour cost and scrapping out the corrosion cleaning the surface by course paper air / brush / cloth, removing all rust, grease oil, dust, any foreign materials like cement mortar splashes etc, with wire brush and emery paper including scaffolding platform, jhoolas and machinery, equipment required for the work shall be arranged by the contractor at his own cost and take all safety measures etc. complete as directed by eic. basic rate including taxes per liter rs 225.00 ) 1 ) asianpaint – apex ultima ( 2 ) nerolac paint excel total ( 3 ) ici dulux ( akzo nobel ) weathershield max ( 4 ) berger paint – weather coat allguard ( 5 ) . growel paint : pentolite super synthetic enamel 15 providing and applying one coat of water based cement interior primer of approved brand and make as mentioned below on surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter. item includes making the surface even and smooth by sand papers / brush / cloth etc. rates are inclusive of all the material and labourers and scaffolding work, cleaning of the floors etc. required for the work. basic rate including taxes per liter rs 90.00 ) 1. asian paint : decoprime cement primer 2. nerolac paint : nerolac cement primer 3. ici dulux ( akzo nobel ) : lite master primer 4. berger paint: bp cement primer 5. growel paint : kangaroo cement primer 16 providing and applying one coat of water based exterior primer of approved brand and make as mentioned below on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter. item includes making the surface even and smooth by sand papers. rates are inclusive of all the material and laborers and scaffolding work, cleaning of the floors etc. required for the work. basic rate including taxes per liter rs 105 ) 1. asian paint : exterior wall primer 2. nerolac paint : nerolac exterior primer 3. ici dulux ( akzo nobel ) weatherguard acrylic primer 4 berger paint : berger bp weathercoat exterior wall primer 17 providing and applying two coat of acrylic wall putty up to required thickness to make surface even of approved brand as mentioned below on internal wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter. item includes making the surface even and smooth by sand papers after each coat. rates are inclusive of all the material and labourers and scaffolding work, cleaning of the floors etc. required for the work. ( basic rate including taxes per litre rs. 42.00 ) 1. asian paint : acrylic wall putty 2. nerolac paint : nelolac wall putty 3. ici dulux ( akzo nobel ) : ici dulux acrylic wall putty 4 .berger paint : happy wall acrylic wall putty 5. growel paint : walguard acrlic wall putty 18 steel work , welded in built up section framed work including cutting hoisting fixing, in position and applying a priming coat of read lead paint, ( a ) in beams and joist, channels, angles tees, flats, with connecting plates or angles cleats as in main and cross beams , hips and jack rafters purlins connected to common rafters and the like. 19 providing and laying 1st quality finished vitrified tiles of size not less than 600mm x 600mm x 8 mm thick, in line and level, as approved by eic, from the listed standard manufacturers and brand names as mentioned below for flooring / skirting / dado / etc. wherever required up to any floor, over under bed with minimum 20 to 40 mm thick cement sand mortar of 1:3 ( 1 cement: 3 coarse sand ) and necessary cement slurry as approved by eic. the joint between tiles shall be as close as possible and not more than 1.5 mm wide. surface having proper leveling, flush pointing by filling the joints with appropriate pigment / chemicals and white cement to match with the shade of tiles, well finishing, curing, to hand over neat and clean surface, including of labour and all materials etc complete as directed by eic. ( 1 ) somany vitro soluble salt nano, 1 ) splash nanovated, 2 ) fabiananovated, 3 ) livananovated, ( 2 ) simpolo soluble salt vitrified tiles sparkle series with neno, 1 ) ivory, 2 ) corus, 3 ) gravel, ( 3 ) asian polished vitrified tiles, 1 ) royal ivory , 2 ) brazilla, 3 ) maharaja, ( 4 ) varmora soluble salt nano 1 ) pear ivory 2 ) glacier 3 ) woodland 20 providing & laying polished kota stone slab flooring over 20mm average ) thick base of cement mortar 1:6 ( 1 cement: 6 coarse sand ) or l m 1:1.5 ( 1lime : 5 coarse sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete ( a ) 25 mm thick 21 providing and laying ceramic tiles 8 mm thick in flooring treads of step and landing laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with flush pointing in white cement 22 providing and laying ceramic tiles 8 mm thick in skirting risers of step and dado on 10mm thick cement plaster 1:3 ( 1cement : 3 coarse sand ) and jointed with white cement slurry. 23 providing & fixing white colored orrisa w / c pan of approved quality the item includes to remove old damaged w / c pan , removing of existing flooring , hidden pipe & fixing of new w / c pan , p or s trap , etc.& providing glazed tiles in w / c line & level etc. complete. all joints should be water tight. the w / c pan and p or s trap joint may be filled up by sanitary m seal. ( all required materials like w / c pan, p or s trap, pvc pipe, cement, white cement , sand , grit , glazed tiles, etc. arrange by contractor at his own cost. ) 24 providing and fixing colored wash down water closet wall hung , european type, w.c. pan with integral p or s trap, cera, parryware, hind ware or equivalent color make as approved by eic including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement : 1 fine sand ) ( including seat & cover ) .the w / c pan and p or s trap joint may be filled up by sanitary m seal. 25 dismantling door, window ventilators etc. ( wood or steel ) shutters including chowkhat, architraves, holdfasts and other attachments etc, complete and stacking the materials with all lead & lift ( not exceeding 3 smt area. ) 26 service charges for fixing door, window ventilators cubboard etc. ( wood or steel ) shutters including chow hat, architraves holdfasts embedded in wall with grouting and other attachments , etc , complete as directed. ( materials like shutters, frame & fixtures & fasting supply by department. ) 27 providing tmt fe 415 bar reinforcement for r c c work including bending binding and placing in position complete up to floor two level. 28 removing dry or oil bound distemper and scrapping and sand papering the wall surface smooth including necessary repairs to scratches complete 29 removing and scrapping of old deteriorated plaster of any thickness from masonry / r c c member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift. 30 providing and laying cement concrete work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. nominal size ) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in foundation, footing, base of column and mass concrete work. 31 providing formwork of ordinary timber planking so as to give a rough finish including centering. shuttering and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.00 mtr height and removal of the same for in situ reinforced concrete and plain concrete work in ( a ) foundation footing bases of columns etc. and mass concrete. 32 providing and fixing to wall ceiling and floor 6.0 kgf / cm2 working pressure polyethylene pipes of finolex, prince or equivalent brand and of the following outside dia low density pipes complete with special flage compression type fittings i.e. y bend, tee, plug bend, wall clips etc. including making good the wall ceiling and floor ( a ) 110 mm dia. 33 providing & laying cement concrete 1:3:6 ( 1 cement 3 coarse sand 6 hand broken stone 40mm nominal size ) & curing complete excluding cost of form work in ( foundation & plinth. ) 34 providing & fixing three layer combination of outer uv stabilized white layer to provide heat deflection ( low absorption of heat on the surface of tank ) , middle black layer for restricting light transmission as well further uv stability and the inner most layer blue for better visibility of made from 100 % virgin food grade material having antibacterial properties to ensures quality of the water , durability and flexibility to perform indian environment conditions of manufacturers sintax pure / kaka tlw or its equivalent brand having weight @ 20 kg. tank is to be fitted on terrace of third / forth floor over the base platform made of cc 1:3:6 having approximate size 1.2 mtx 1.2 mt x 0.1 meter height, top finish with neat coat of cement neeru. item rates are inclusive of providing and fixing of one brass ball coke valve 3 / 4 dia with all fitting and out let connection with outlet pipe 1 dia with austeral / prince or equivalent upvc ball valve with air vent of appropriate size as approved etc complete as directed by engineer incharge. 35 providing and applying ( acc salt out efflorescence solution with grey cement slurry ) for outside detoretad plaster on walls up to height 10 meters above ground level. the work includes with scaffolding and all tools tackles etc. apply chemical of 270 gms per smt. etc. complete as directed by eic. 35. any item of gog sor for year 2015 2016...

Gujarat State Watershed Management Agency - Gujarat

26707892 tender for item rate contract for integrated watershed management programme ( iwmp ) i.w.m.p.: 48 bitiyari, village: khanoth ta. lakhapat. dist. kutch 1 construction of farm bund as per design and given typical sanction. 2 leveling work in all soft soil is including breaking of clods, dressing depositing and spreading the excavated materials in lower part of terrace within 10mt leads by tractor of hired machinery like jcb, tractor, and loader etc. as per engineers instruction. 3 jungle clearance ( ganda baval etc ) of light / heavy dance ( work done by manually or by machinery ) including grabbing of & removing the roots & girth completely from the ground & back fill with earth & making surface good as directed including depositing & removing the material away from the site of work at own risk and cost as and where directed etc completed for following. ( a ) light density ( irrigation sor 2015 16, ch 08, item no. 32 ) 4 quarrying, transporting & spreading selected materials from borrow area for raising of embankment work in homogeneous section in uniform layers of specified thickness ( up to 23cm ) as directed including dressing breaking clods and dry rolling of earth work with light rollers of upto 2.0 tones capacity as directed with all lift etc complete. ( irrigation sor 2015 16, ( ch 01, item no. 6 ch 01, item no.11 ch 01, item no. 12 + ch 06 item no. 6 ( 73.00 7.40 6.80 + 4.60 = 63.40 ) 5 excavation in all sort of strata and formations incl. depositing the unuseful excavated stuff as and where directed including sorting and stacking useful materials as directed up to 200 mt lead and all lift etc. complete incl. dewatering. ( irrigation sor 2015 16, ch 05, item no. 1 ) ( a ) in overburden incl. hard murrum. ( b ) in soft rock. ( c ) in hard rock. 6 prov. & laying in position cement concrete using cement, sand and crushed metal coarse aggregate and machine mix for pcc / rcc including necessary formworks compaction by vibrator, curing as directed with all lead & lift etc complete. ( excluding cost of steel ) for .body wall, apron, training wall, side wall, splay wall, key wall, cut of wall etc. ( irrigation sor 2015 16, ch 5, item no. 4 ) ( 4 a ) controlled concrete grade m 15 and msa 40mm 7 providing and laying dry rubble stone pitching without base , inverted filter / murrum bedding and header stone including hand packing & trimming & dressing slopes etc complete. ( irrigation sor 2015 16, ch 1, item no. 16 ) ( a ) 15 cms thick stone pitching ( b ) 23 cms thick stone pitching 8 providing and fixing in position white marble plate of size 45x45x1.8 cm including engravings the letters as per drawing / as directed etc complete. ( irrigation sor 2015 16, ch 5, item no. 17 ) 9 transporting including rehandling and spreading of the useful excavated materials of c.o.t spillway foundation, approach channel, tail channel, hr, inspection road, approach road, etc for embankment raising including spreading in uniform layers of specified thickness, dressing, breaking clods & rolling at requisite moisture content to required dry density with suitable type of roller and watering at omc for lead upto 1.0 km and all lift etc complete. 10 prov. & laying in position nominal mix concrete using cement , sand & h.b.metal by mass and machine mix for pcc including necessary formworks, compaction, ramming, curing as directed with all lead and lift etc complete for foundation concrete / other general purpose a ) concrete gradem 10 metal size 40 to 63mm 11 excavation in all sort of strata and formations incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as directed upto 30 mt lead etc. complete incl. dewatering. ( for all type canal & foundation trenches of c.d. works ) in overburden incl. hard murrum. ( a ) depth from 0.00 mt to 3.00 mt ( b ) depth from 3.00 mt to 6.00 mt ( c ) depth above 6.00 mt 12 providing and laying graded filters of sand, gravel / metal and over size metal ( 100 to 150 mm ) behind the retaining wall & wing walls as directed as per approved drawing with all lead and lifts etc complete. 13 drilling of 250mm dia pilot bore hole in all type of strata by mud flush direct rotray rig from 0.00mtr to specified depth. 14 reaming of 250mm dia bore hole to following size of bore including assembling, jointing, clamping, lowering rcc, housing, casing, strainer pipes and other assembly items with black crush metal packing and clay packing etc. complete. i ) 600mm dia bore hole from specified depth. 15 uncoursed rubble masonry with hard stone of approved quality in foundation and plinth in cement mortar 1:5 ( 1 cement: 5 course sand ) including levelling up etc. complete. ( irrigation sor 2015 16, ch 05, item no.7 ( a ) ) 16 providing and filling sand 17 providing and filling black trape metals of size 20mm to 60mm dia 18 excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff up to 50 meter lead. ( b ) dense or hard soil r & b sor 2015 16 ch 04 item no.1 19 filling available excavated earth ( excluding rock ) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. r & b sor 2015 16 ch 04 item no.6 20 providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 hand broken stone aggregates 40 mm nominal size ) and curing complete excluding cost of formwork in ( a ) foundation and plinth ( up to 10 ton ) r & b sor 2015 16 ch 05 item no.5.3.3 21 providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 crushed stone aggregates 20 mm nominal size ) and curing complete including cost of formwork in ( a ) wall caps / coping ( up to 10 ton ) r & b sor 2015 16 ch 05 item no.5.3.14 22 ( i ) uncoursed rubble masonry with hard stone of approved quality in foundations and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand including leveling up etc. complete ( up to 10 ton ) r & b sor 2012 13 ch 07 item no.7.6 23 providing and laying ordinary cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stone aggregates 20 mm nominal size ) and finishing smooth with, curing etc. complete including the cost of formwork but excluding the cost of reinforcement for r.c.c work in ( b ) columns: ( i ) having crosssectional area 0.05 to 0.08 sq.m r & b sor 2015 16 ch 05 item no. 69 24 precast concrete block masonry ( including quoin blocks jamb blocks closer etc. ) with solid concrete blocks of approved size made of cement concrete 1:3:6 mix ( 1 cement : 3 coarse sand: 6 graded stone aggregates of 20 mm and down grade ) in foundation and plinth cement mortar 1:6 ( up to 10 ton ) r & b sor 2015 16 ch 07 item no. 7.75 25 providing 15mm thick cement plaster in single coat on rough ( similar ) side of single or half brick walls for interior plastering up to floor two level and finished even and smooth in ( ii ) cement mortar 1:4 ( 1 cement :4 sand ) r & b sor 2015 16 ch 17 item no.17.6 26 white washing with lime on wall surface ( two coats ) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter. r & b sor 2015 16 ch 18 item no.18.11 27 providing and fixing m.s. grills of required pattern to wooden frames of windows etc. with m.s. flats at required spacing and frame around, square or round bars with round headed bolts and nuts or by screws ( a ) plain grill. ( up to 10 ton ) r & b sor 2015 16 ch 10 item no.10.1 28 providing tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete up to floor two level ( up to 10 ton ) r & b sor 2015 16 ch 5 item no. 5.4.11 29 providing and laying cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size ) laid in one layer and finished with a floating coat of neat cement. ( a ) 40mm thick. ( up to 10 ton ) r & b sor 2015 16 ch 14 item no. 14.71 30 providing corrugated g.i. sheet of class roofing fixed with galvanized iron j or hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses. ( 1 ) 0.80 mm thick sheet. ( up to 10 ton ) r & b sor 2015 16 ch 15 item no. 15.1 31 providing and fixing rolling shutters approved make made of 80 mm wide m. laths inter locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push pull operation complete but excluding the cost of hood cover and spring. ( a ) shutters having width below 3.5.m. r & b sor 2015 16 ch 11 item no. 11.9 32 panting and lettering with enamel paint coats etc complete. ( v ) road sign board. r & b sor 2015 16 ch 26 item no. 26058...

Kandla Port Trust - Gujarat

23651663 providing of concrete flooring underneath pipeline inside oil jetty area at old kandla deendayal port trust , gandhidham , kutchh...

Archaeological Survey Of India - Gujarat

22876746 cdw to revitalization of bhadra fort precints , ahmedabad . and removing dead damaged lime concrete , demolishing r . c . c , dismantling of wood work , relaying lime concrete flooring , applying anti termite treatments , re erection of dismantled wood works , re fixing wooden boarding etc...

Nagar Palika Nigam - Gujarat

20958629 tender for proposed construction for sanetry garege buliding work and concrete flooring work for santry and garage ground at okha for okha nagar palika under f f c 2018 2019=> open...

Nagar Palika Nigam - Gujarat

13521268 tender for hiring of j.c.b., masonry work, r.c.c. work, plain cement concrete, flooring work, compound hole, colour work, plaster work, road repairing, gutter repairing, providing tractor, labour work, rain water harvesting work, cross boring / boring work, demolition work, general trenching work, de watering work, centering shuttering work, water work related plumbing and piping fitting and manhole cover work....

Essar Group - Gujarat

13042640 tender for reinforced cement concrete flooring of cdp de dusting area....

Rajkot Municipal Corporation - Gujarat

10629801 tender for excavation for foundation upto 0.00 to 1.5 m, 1.51 to 3.00 m, 3.01 to 4.50 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff within repair maintenance contract limit lead in loose or soft soil or soft rock hard rock etc, removal of excavated stuff and laying, cement concrete flooring ( ips ) 50 mm thick in proportion of 1:2:4 with a floating coat of neat cement, finishing, curing etc....

Gujarat State Road Transport Corporation - Gujarat

10202539 expression of interest for consultancy services construction of new bus stations, cement concrete flooring in circulation area & special repair works in depot at various districts of gujarat state....

Department Of Roads And Transport - Gujarat

10167111 expression of interest for recognized and relevant experienced consultant firm for supervision and quality control for construction of new bus stations , cement concrete flooring in circulation area and special repair works, road work, project management consultancy building work...