40017157
annual rate contract of providing & fixing wall paneling, false ceiling, cupboard, platform, drawer, sliding window, shelves and etc. items gypsum wall paneling : providing and fixing gypsum board joint less wall paneling in accordance with green building act with eco friendliness, fire resistant, heat penetration, sound absorption, joint less, 1220mmw x 1830mml with 1 mm variation and 12.5 mm thickness (gyproc or equivalent) plain gypsum board. by using gi perimeter channel made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 20 mm x 28 mm x 30 mm x 0.45mm thick with effective thickness of approximately 1.0 mm and gi knurled runner 80 mm x 26 mm x 0.55 mm thick fitted on wall by pvc grip p rawl plug screw as per requirement. finally anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed should be done.,fiber cement board wall paneling : supplying and fixing fiber cement board wall paneling with fiber cement board shall have characteristics of eco friendliness, noncombustible with fire resistant as per bs 476, impact resistant, moisture resistant tested as per is 14862, 35db sound insulation, termite proof, 8.0 mm thickness fiber cemented board in accordance with indian green building council. by using gi perimeter channel made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 20 mm x 28 mm x 30 mm x 0.45mm thick with effective thickness of approximately 1.0 mm and gi knurled runner 80 mm x 26 mm x 0.55 mm thick fitted on wall by pvc grip p rawl plug screw as per requirement. finally anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed should be done.,acoustic gypsum board wall paneling : providing and fixing acoustic board wall paneling by using eco friendliness, moisture resistant, humidity resistant, better fire resistance, good noise reduction coefficient, grooved / without grooved, size 595mm (w) x 595mm (l) x 12.5 mm (thickness)/ 595mm (w) x 1220mm (l) x 12.5 mm (thickness) / 1220 mm (w) x 1830mm (l) x 12.5 mm (thickness) with face side paper based moisture resistant (gyptech or equivalent ) acoustic gypsum board, noise reduction, sound absorber with different types of perforation (4% to 22%) in symmetric form having patterns like round, round & capsule, irregular round, long capsules, inter sections of over lapping circles as per availability and requirement of authority in 610mm x 610mm or 595mm x 595mm equal blocks on panel . the boards / panels are backed with an acoustic tissue. by using gi perimeter channel made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 20 mm x 28 mm x 30 mm x 0.45mm thick with effective thickness of approximately 1.0 mm and gi knurled runner 80 mm x 26 mm x 0.55 mm thick fitted on wall by pvc grip p rawl plug screw as per requirement. finally anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed should be done.,glass wool : supplying and fixing of 25 mm thickness with 24 densities glass wool insulation between ceiling and/or wall /partition for acoustical, heat resistance and sound proofing.,glass wool : supplying and fixing of 50 mm thickness with 24 densities glass wool insulation between ceiling and wall/partition for acoustical, heat resistance and sound proofing.,sound proof wall paneling : providing and fixing 65mm thick solid prelam pvc wall paneling for reducing the noise made of insulated panels of size 600mm x 600mm whole thickness of 5mm solid pvc sheet on 60mm glass wool panel with different type of wholes. panel inserted in a frame made of 12mm thick solid pvc ply stuck on wall by screwing with pvc wall plug as per direction of engineer in charge for good looking and attractive corporate look.,wall paneling : p/f pvc made wall paneling of plastic section (250 x 6 mm) with internal grid of g.i. channel and angle frame structure. plastic section (sintex or equivalent hollow section) shall be fixed to internal grid in such a way that no nail and screw shall be visible.,pvc puff panel for wall & roof : for readymade for rooms cabins & partition, p/f pvc (sintex or equivalent hollow section) made puff sandwich panel of 40 mm thick wall panel fastener type with external 0.50 mm tct colour coated gi sheet and internal 0.50 mm tct colour coated gi sheet with puff insulation material sandwich in between fixed with tug and grew with each other of 1 meter width panel with required support structure of erw tube etc.com. (useful for readymade cabins, classrooms, conference room and godowns),pvc puff panel for wall & roof : for readymade for rooms cabins & partition, p/f pvc (sintex or equivalent hollow section) made puff sandwich panel of 20 mm thick roof panel trapezoidal sheet top site external 0.50 mm tct colour coated gi sheet and internal 0.50 mm tct colour coated gi sheet with puff insulation material sandwich in between fixed with tug and grew with each other of 1 meter width panel with required support structure of erw tube with fastener etc. com. (useful for roof of readymade cabins, classrooms, conference room and godowns),wall paneling : providing and fixing 5mm thick solid prelam pvc wall paneling using 12mm celuka pvc ply for framing etc complete.,mdmr panel wall paneling : providing and fixing perforated tongue n groove type panel wall paneling made from medium density moisture resistant fiber board substrate with laminated / melamine facing in different shade / species and finish with reverse side melamine balancing layer finish having size of 128mm w x 2440mm l and 15mm thickness. panel shall have fire retardant and monolithic appearance properties with perforated pattern where the visible surface has a helmholtz fluted perforation of 3.0 mm width and visible panel of 15 mm or 30 mm each maintaining 0.77 and 0.62 nrc respectively. the back side of each panel is being perforated with 10 mm round holes and a layer of standard acoustic textile for superior acoustic performance. the (gyptech or equivalent ) groowood panels with above mentioned characteristics are fixed by using special holed clips on specially extruded aluminum channel of 25 mm x 19mm x 0.80mm x 10 mm (gap between 7.50mm flanges) duly fixed by using screws and p rawal plugs spacing at 600mm c/c. edges and corners should be finished by using wooden or pvc molding. for leveling and plumbed of wall (if required) use gi perimeter channel made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 20 mm x 28 mm x 30 mm x 0.45mm thick with effective thickness of approximately 1.0 mm and gi knurled runner 80 mm x 26 mm x 0.55 mm thick fitted on wall by pvc grip p rawl plug screw as per requirement.,mdf board wall paneling : providing and fixing medium density perforated board wall paneling, boards are made from medium density engineer wood with groove lining / non groove lining, melamine / wood polish / pre laminated finished facing having size of 1220mm w x 1830mm l x 12mm thickness. board with different types of perforation (4% to 15%) in symmetric form having patterns like round, round & capsule, irregular round, long capsules, inter sections of over lapping circles as per availability and requirement of authority in 610mm x 610mm equal blocks on panel and non woven tissue on back side for superior acoustic performance. the (gyptech or equivalent ) perfona m panels with above mentioned characteristics are fixed with exposing groove / covering joints by bidding at paneling by using gi perimeter channel made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 20 mm x 28 mm x 30 mm x 0.45mm thick with effective thickness of approximately 1.0 mm and gi knurled runner 80 mm x 26 mm x 0.55 mm thick fitted on wall by pvc grip p rawl plug screw as per requirement. joints, edges and corners should be finished by using wooden or pvc molding.,high density compressed fiber glass panel with fabric wall paneling : providing and fixing wall paneling by using high density compressed fiber glass panel with fabric by using channel trim size of 2700/3000 mm l x 44 mm h fixed on wall by direct fixing plat with 400mm c/c fixing the bracket at periphery of paneling than recessed profile having size of 2700/2800 mm l x 55 mm w or t24 main runner having size of 3700 mm l x 24 mm w shall be kept in position with the channel trims for installation use br / mvl screw as per requirement. finally (gyproc or equivalent) ecophon panels having high density compressed fiber glass panel with size of 1200mm x 2700mm x 40 mm thickness should be install which has natural square edge, easily demountable, with fabric and wrapped around in concealed system with grippers, light weight, high strength, painted visible surface, back of the tile covered with glass tissue. having 0.90 noise reduction coefficient as per astm c 423, humidity resistance permanent ambient rh up to 95% at 30 * c without sagging, warping or delaminating (en13964:2014)., acoustic sound absorption (alpha w) 1 at minimum 50 mm o.d.s as per en iso, acoustics sound absorption class class a at 50 mm o.d.s as per en iso 11654, tested and classified as non combustible according to en iso 1182 with reaction to fire classification class a2 s1 d0 according to en 13501 1 european standard. more than 70% re cycled content, ce marked according to the harmonized standard en 13964:2014. indoor health & well being complying with the french regulation on voc emissions, a+ level.,high density compressed fiber glass panel wall paneling : providing and fixing false ceiling by using high density compressed fiber glass panel wall paneling by using impaler clip of size 100 x 75 x 1 mm at a distance of 300 mm c/c with screw and plug and hang the panel vertically by fixing it firmly towards the wall. the impaler clip should not be used less than 4 nos. per panel and for smaller size panel to get the secured grip to the wall. these clips can also be screwed on the wooden spacer to create more space between wall and phonetic panel. finally high density (min. 100 kg/m³) compressed fiber glass square edge akostika tiles (gyproc or equivalent)having size of 595mm x 595mm x 25mm / 595mm x 1195mm x 25mm should be install which has characteristics of easily demountable, manufactured from high density glass wool, light weight, high strength, visible surface is a batch painted glass tissue in white / black, back of the tile covered with glass tissue. and having 0.90 noise reduction coefficient as per astm c 423, shall have minimum 90 rh, acoustic sound absorption avg. as per en iso 354 is 0.81 at 300 mm ods, tested and classified as non combustible product.,aluminum composite panel exterior area application : providing and fixing of aluminum composite panel exterior wall / ceiling / other area applications by using 3.0 mm thick with actual 0.25mm top skin, 2.50mm ldpe core thickness & 0.25mm bottom skin aluminum composite panel, total structure should be made by using 38mm x 25mm x 1.0mm aluminum square pipe by placing aluminum square pipe on periphery of paneling than plant aluminum square pipe at 600mm c/c vertically and 1200 mm c/c horizontally which make 600mm x 1200mm blocks to complete plumb and level structure. if required to strengthen the structure additional square pipe should be placed in structure. aluminum square pipe should be fixed with metal screw as per requirement. finally 3.0 mm thick (eurobond or equivalent) above mentioned characterized aluminum composite panel shall be apply on plumb and level structure, for filling joints good quality of silicon and other necessary materials should be used.,aluminum composite panel interior area application : providing and fixing of aluminum composite panel interior wall / ceiling / other area applications by using 3.0 mm thick with actual 0.18mm top skin, 2.64mm ldpe core thickness & 0.18mm bottom skin aluminum composite panel, total structure should be made by using 38mm x 25mm x 1.6mm gi square pipe by placing gi square pipe on periphery of paneling than plant gi square pipe at 600mm c/c vertically and 1200 mm c/c horizontally which make 600mm x 1200mm blocks to complete plumb and level structure. if required to strengthen the structure additional gi square pipe should be placed in structure. gi square pipe should be fixed with metal screw as per requirement. finally 3.0 mm thick (eurobond or equivalent) above mentioned characterized aluminum composite panel shall be apply on plumb and level structure, for filling joints good quality of silicon and other necessary materials should be used.,aluminum composite panel interior area application : providing and fixing of fr aluminum composite panel interior wall / ceiling / other area applications by using fire retardant 3.0 mm thick with actual 0.10mm top and bottom skin made from alloy 3xxx/5xxx with kynar 500 pvdf/feve lacquered surface on front and service coated on the rear and 2.80mm thick middle mineral core of fire resistant minerals (ath and / or mdh) filled core, total structure should be made by using 38mm x 25mm x 1.6mm gi square pipe by placing gi square pipe on periphery of paneling than plant gi square pipe at 600mm c/c vertically and 1200 mm c/c horizontally which make 600mm x 1200mm blocks to complete plumb and level structure. if required to strengthen the structure additional gi square pipe should be placed in structure. gi square pipe should be fixed with metal screw as per requirement. finally 3.0 mm thick (eurobond or equivalent) above mentioned characterized aluminum composite panel shall be apply on plumb and level structure, for filling joints good quality of silicon and other necessary materials should be used.,solid surface work : providing and fixing of solid surface work on any possible prefabricated area by using 6 mm thick solid surface sheet having non porous property, iso 45001 occupational health and safety management systems certificate, it should have ul2818 (green guard) stander for building materials, finishes and furnishings, it should be certified by nsf (national sanitation foundation) and can be used for the area where hygiene is essential, it should have class a flammability stander certification. the solid surface laying work should be done by using stander adhesive and other relevant process to complete the work as per requirement.,8 mm thick high density decorative pvc wall paneling /falls ceiling of d stona wall panel : providing fixing and supplying 8 mm thick high density decorative d pvc wall paneling the decorative membrane panel section should be 8 mmx 600mm heavy thick multy chamber hollow section for extra strength of panel, having size of 600 mm x 8 mm stone plastic section manufactured by iso 9000 2015 company polywood or equivalent inner frame of gi chanel framing . the g.i chanel section shall be fixed to the wall using 30 mm long m.s. self drilling through the groove in the strip by using pvc fasteners. the distance between two screws shall not be more than 600 mm. the fluted grew section fix over on gi frame by self drilling screw the joint of two panels for aesthetic looks. the exact size of the panel and correspondingly of grid may be vary depending on the size of the wall. entire work should be done in true line level and maintain aesthetic value as directed by engineer in charge.,15 mm thick high density decorative pvc wall paneling with pvc wood base panel wall panel : providing fixing and supplying 15 mm thick multy wall partition sheet with micro hollow section fix with wall with 5mm pvc strep fix with wall by self drilling screw as inner frame and decorative pvc laminated sheet 1mm fix by pvc solvent as wall paneling wall to wall cover paneling all plastic section manufactured by iso 9000 2015 company plywood or equivalent section shall be fixed to the wall using 30 mm long self drilling on the strip by using pvc fasteners. the distance between two screws shall not be more than 600 mm. the joint of two panels for aesthetic looks bending of dstona stone plastic biding for top cover bottom cover and joint cover. the exact size of the panel and correspondingly of grid may be vary depending on the size of the wall. entire work should be done in true line level and maintain aesthetic value as directed by engineer in charge.,24 mm thick high density decorative pvc wall paneling with pvc wood base panel wall panel : providing fixing and supplying 24 mm thick malty chamber hollow section fix with wall with 5mm pvc strip fix with wall by self drilling screw as inner frame and decorative pvc laminated sheet 1mm fix by pvc solvent as wall paneling wall to wall cover paneling all plastic section manufactured by iso 9000 2015 company plywood or equivalent section shall be fixed to the wall using 30 mm long. self drilling on the strip by using pvc fasteners. the distance between two screws shall not be more than 600 mm. the joint of two panels for aesthetic looks. the exact size of the panel and correspondingly of grid may be vary depending on the size of the wall. entire work should be done in true line level and maintain aesthetic value as directed by engineer in charge.,10 mm thick high density decorative pvc wall paneling with fluted panel wall : providing fixing and supplying 10 mm thick high density decorative pvc wall fluted paneling the decorative grew panel section should be 10 mm ( +/ 0.15mm) thick ,having size of 300 mm x 10 mm manufactured by iso 9000 2015 company polywood or equivalent inner frame of gi chanel framing . the g.i chanel section shall be fixed to the wall using 30 mm long m.s. self drilling through the groove in the strip by using pvc fasteners. the distance between two screws shall not be more than 600 mm. the fluted grew section fix over on gi frame by self drilling screw the joint of two panels for aesthetic looks. the exact size of the panel and correspondingly of grid may be vary depending on the size of the wall. entire work should be done in true line level and maintain aesthetic value as directed by engineer in charge.,polyfiber acoustic panels works : providing and fixing of polyester fiber acoustic panel used at various area for effective sound absorption having 2440mm x 1220mm x 9mm size with fire retardant (self extinguishing) property, made from 100% recycled formaldehyde free fiber without chemicals, 180 200 kg/m², nrc value should be 0.60 to 0.85, no chemicals should be used for making the panel, easy to clean, high water resistance and easy to apply for effective sound absorption including 6 mm plywood paneling including materials, adhesive and necessary hardware etc.,sound proof false ceiling : providing and fixing 65mm thick solid prelam pvc false ceiling for reducing the noise made of insulated panels of size 600mm x 600mm wall thickness of 5mm solid pvc sheet on 60mm glass wool panel with deferent type of holes. the panel inserted in a frame made of anodized aluminum 25mm x 25mm "t" section in square grid of 600mm x 600mm aluminum frame work is supported from ceiling with the help of "j" hook required size maintain the ceiling level. aluminum “l†section 1 inch x 1 inch supported on side wall. the galvanized square tube of 19mm x 19mm is supported to the whole ceiling as per direction of engineer in charge for good looking and attractive corporate look.,gypsum board false ceiling : providing and fixing gypsum board joint less false ceiling in accordance with green building act with eco friendliness, fire resistant, heat penetration, sound absorption, 1220mmw x 1830mml with 1 mm variation and 12.5 mm thick (gyproc or equivalent) plain gypsum. by using high quality gi parameter channel 20 mm x 27 mm x 30 mm x 0.55mm thick fitted on wall as per requirement, gi knurled angle suspender 25 mm x 10 mm x 0.55 mm total thick fitted on ceiling by pvc grip p rawl plug 38 x 12 screw or coach bolt, gi intermediate channel 15 mm x 45 mm x 15 mm x 0.70 mm thick fitted by screw on angel suspender, knurled gi ceiling section 80 mm x 26 mm x 0.55 mm thick fitted on intermediate channel by connecting clip, with anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed.,cemented board false ceiling : providing and fixing fiber cement board false ceiling. cement board having characteristics of eco friendliness, non combustible with fire resistant as per bs 476, impact resistant, moisture resistant sound insulation, termite proof, 8.0 mm thickness fiber cemented board in accordance with indian green building council. by using high quality gi parameter channel 20 mm x 27 mm x 30 mm x 0.55mm thick fitted on wall as per requirement, gi knurled angle suspender 25 mm x 10 mm x 0.55 mm total thick fitted on ceiling by pvc grip p rawl plug 38 x 12 screw or coach bolt, gi intermediate channel 15 mm x 45 mm x 15 mm x 0.60 mm thick fitted by screw on angel suspender, knurled gi ceiling section 80 mm x 26 mm x 0.55 mm thick fitted on intermediate channel by connecting clip, with anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed.,acoustic gypsum board ceiling panel false ceiling : providing and fixing acoustic gypsum board false ceiling acoustic gypsum board having characteristics of eco friendliness, moisture resistant, humidity resistant, better fire resistance, noise reduction coefficient shall be 0.50 (+ / 0.01), grooved / without grooved, 595mm (w) x 595mm (l) x 12.5mm (thickness)/ 595mm (w) x 1220mm (l) x 12.5 mm (thickness) / 1220 mm (w) x 1830mm (l) x 12.5 mm (thickness) with face side paper based moisture resistant (gyptech or equivalent) acoustic gypsum board, sound absorber value shall be 0.50 (+ / 0.01) as per astm c 423 with different types of perforation in symmetric form having patterns like round, round & capsule, irregular round, long capsules, inter sections of over lapping circles as per availability and requirement of authority in 610mm x 610mm or 595mm x 595mm equal blocks on panel . the boards / panels are backed with an acoustic tissue. by using high quality gi parameter channel 20 mm x 27 mm x 30 mm x 0.55mm thick fitted on wall as per requirement, gi knurled angle suspender 25 mm x 10 mm x 0.55 mm total thickness fitted on ceiling by pvc grip p rawl plug 38 x 12 screw or coach bolt, gi intermediate channel 15 mm x 45 mm x 15 mm x 0.60 mm thick fitted by screw on angel suspender, knurled gi ceiling section 80 mm x 26 mm x 0.55 mm thick fitted on intermediate channel by connecting clip, with anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed.,gypsum panel false ceiling : providing and fixing tiled false ceiling of size 595x595 mm in true horizontal level suspended on inter locking (gyproc or equivalent) plain center black metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive) consisting of 3000mm / 3600mm long main "t" runner size 15/24x32mm x 0.30mm thick, 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick, 600mm secondary cross "t" of size 15/24x25mm x 0.30mm thick and ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick. bottom exposed capping of width 15mm / 24 mm of all t sections shall be of 0.25mm thick ppgi. wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc. with rawl plugs and wooden screws at 300mm c/c. main "t" runners are then suspended from ceiling using 16 gauge gi wire fixed to ceiling with 8 mm dia and 38mm long specially designed dash fasteners spaced at max1200mm c/c along main t and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. then 1200mm long cross "t" is interlocked between the main "t" at 600mm center to center to form a grid of 1200x600 mm and then secondary cross “t" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. cross tees at the ends having length more than 600mm are to be supported independently. finally se plain board (gyproc or equivalent) gypsum tiles of size 595x595x 8 mm thick having 90 rh, > 0.75 light reflectance, cac: 30, laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side are placed in this grid.,mineral fiber panel false ceiling : providing and fixing tiled false ceiling of size 595x595 mm in true horizontal level suspended on inter locking (gyproc or equivalent) plain center black metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive) consisting of 3000mm / 3600mm long main "t" runner size 15/24x32mm x 0.30mm thick, 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick, 600mm secondary cross "t" of size 15/24x25mm x 0.30mm thick and ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick. bottom exposed capping of width 15mm / 24 mm of all t sections shall be of 0.25mm thick ppgi. wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers. main "t" runners are then suspended from ceiling using 16 gauge gi wire fixed to ceiling with 8 mm dia and 38mm long specially designed dash fasteners spaced at max1200mm center to center along main t and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. then 1200mm long cross "t" is interlocked between the main "t" at 600mm center to center to form a grid of 1200x600 mm and then secondary cross “t" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. cross tees at the ends having length more than 600mm are to be supported independently. finally white colored mineral fiber se / re (gyproc or equivalent) tiles of size 595x595x15mm having nrc of 0.55, cac 35, lr 0.84 and suitable for use in relative humidity up to 95% and temperature up to 40 deg c are placed in this grid.,mineral fiber panel false ceiling : providing and fixing tiled false ceiling of size 595x595 mm in true horizontal level suspended on inter locking (gyproc or equivalent) plain center black metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive) consisting of 3000mm / 3600mm long main "t" runner size 15/24x32mm x 0.30mm thick, 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick, 600mm secondary cross "t" of size 15/24x25mm x 0.30mm thick and ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick. bottom exposed capping of width 15mm / 24 mm of all t sections shall be of 0.25mm thick ppgi. wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc. with rawl plugs and wooden screws at 300mm centers. main “t" runners are then suspended from ceiling using 16 gauge gi wire fixed to ceiling with 8 mm dia and 38mm long specially designed dash fasteners spaced at max1200mm center to center along main t and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. then 1200mm long cross "t" is interlocked between the main "t" at 600mm center to center to form a grid of 1200x600 mm and then secondary cross “t" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. cross tees at the ends having length more than 600mm are to be supported independently. finally white colored (gyproc or equivalent) mineral fiber se/ re tiles of size 595x595x15mm having nrc of 0.5, cac 34, lr 0.88 and suitable for use in relative humidity up to 90% and temperature up to 40 deg c are placed in this grid.,aluminum perforated tiles false ceiling : providing and fixing false ceiling by using metal tiles with lay in ceiling installation systems by using inter locking (gyptech or equivalent) 15mm / 24mm plain center black precoated gi t grid system in 600x600mm module made from hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive, which includes main runner and cross “tâ€. ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers shall fitted. than suspending 3000mm / 3600mm l x 15/24w x 32mmh x 0.30mm thick main "t" runner by using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12 mm dia and 38mm long dash fasteners, 4mm gi adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm at 1200mm c/c, and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall 1200mm long cross "t" of size 15/24x25mm (h +/ 1mm) x 0.30mm thick is then interlocked into the pre cut slots in the main tees at 600mm centers in direction perpendicular to the main tee to make a grid of 600x 1200mm. finally 600mm long secondary cross "t" of size 15/24x25mm (h +/ 1mm) x 0.30mm thick are then interlocked into the pre cut slots in the middle of 1200x600 grid and in direction parallel to the main tee to make a module of 600x600mm . cross tees having length more than 600mm are to be supported independently. finally (gyptech or equivalent) aluminum metal ceiling lay in perforated t 15 / 24 edge white color tiles of size 595x595 mm and 0.6 (+ / 0.1mm) / 0.7mm thick with 8mm drop; made of al alloy sheet and 20% perforation area with 1.8mm / 2.4mm dia holes and having nrc (noise reduction coefficient) of 0.5 and 0.75 respectively, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black glass fiber acoustical fleece are placed in this grid.,false ceiling : p/f pvc (sintex or equivalent hollow section) made false ceiling of plastic section (250 x 6 mm) with internal grid of g.i. channel and angle frame structure. sintex plastic section shall be fixed to internal grid in such a way that no nail and screw shall be visible tube light gaps shall be provided in the false ceiling work which shall be covered with bending etc. comp.,false ceiling : providing and fixing 5mm. thick solid prelam pvc flush type false ceiling by using frame work of gi “câ€, “u†and “l†section g.i. hook, wire and 6mm. road as per requirement etc. comp.,mdmr panel false ceiling : providing and fixing groowood perforated tongue n groove type panel false ceiling (gyptech or equivalent) made from medium density moisture resistant fiber board substrate with laminated / melamine facing in different shade / species and finish with reverse side melamine balancing layer finish having size of 128mm w x 2440mm l and 15mm thickness. panel shall have fire retardant and monolithic appearance properties with perforated pattern where the visible surface has a helmholtz fluted perforation of 2mm width and visible panel of 15 mm or 30 mm each maintaining 0.77 and 0.62 nrc respectively. the back side of each panel is being perforated with 10 mm round holes and a layer of standard acoustic textile for superior acoustic performance. the panels are fixed by using special holed clips on specially extruded aluminum channel of 25 mm x 19mm x 0.80mm x 10 mm (gap between 7.50mm flanges) duly fixed by using screws and p rawal plugs spacing at 600mm c/c. the channel is suspended from ceiling by using gi knurled angle suspender 25 mm x 10 mm x 0.55 mm total thickness fitted in ceiling at 750mm x 750mm c/c, high quality gi parameter channel 20 mm x 27 mm x 30 mm x 0.55mm thick fitted on wall as per requirement by using pvc grip p rawl plug 38 x 12 screw or coach bolt, gi intermediate channel 15 mm x 45 mm x 15 mm x 0.60 mm thick fitted at 750mm x 750mm c/c by screw on angel suspender, knurled gi ceiling section 80 mm x 26 mm x 0.55 mm thick fitted on intermediate channel by connecting clip edges and corners should be finished by using wooden or pvc molding.,mdf board ceiling panel false ceiling : providing and fixing medium density perforated board false ceiling boards (gyptech or equivalent) are made from medium density engineer wood with groove lining / non groove lining, melamine / wood polish finished facing having size of 1220mm w x 1830mm l x 12mm thickness. panel shall have 0.16 w/mk k value with different types of perforation in symmetric form having patterns like round, round & capsule, irregular round, long capsules, inter sections of over lapping circles as per availability and requirement of authority in 610mm x 610mm or 595mm x 595mm equal blocks on panel and non woven tissue on back side for superior acoustic performance. the panels are fixed with exposing groove / covering joints by bidding at ceiling by using gi knurled angle suspender 25 mm x 10 mm x 0.55 mm total thickness fitted in ceiling at 750mm x 750mm c/c, high quality gi parameter channel 20 mm x 27 mm x 30 mm x 0.55mm thick fitted on wall as per requirement by using pvc grip p rawl plug 38 x 12 screw or coach bolt, gi intermediate channel 15 mm x 45 mm x 15 mm x 0.60 mm thick fitted at 750mm x 750mm c/c by screw on angel suspender, knurled gi ceiling section 80 mm x 26 mm x 0.55 mm thick fitted on intermediate channel by connecting clip. joints, edges and corners should be finished by using wooden or pvc molding.,high density compressed fiber glass panel false ceiling : providing and fixing false ceiling by using high density compressed fiber glass panel with lay in ceiling installation systems by using inter locking (gyptech or equivalent)15mm / 24mm plain center black precoated gi t grid system in 600x600mm module made from hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive, which includes main runner and cross “tâ€. ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers shall fitted. than suspending 3000mm / 3600mm l x 15/24w x 32mmh x 0.30mm thick main "t" runner by using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12 mm dia and 38mm long dash fasteners, 16 gauge gi wire / 4mm gi adjustable rods with galvanized butterfly level clips (if required) of size 85 x 30 x 0.8 mm at 1200mm c/c, and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick is then interlocked into the pre cut slots in the main tees at 600mm centers in direction perpendicular to the main tee to make a grid of 600x 1200mm. finally 600mm long secondary cross "t" of size 15/24x25mm x 0.30mm thick are then interlocked into the pre cut slots in the middle of 1200x600 grid and in direction parallel to the main tee to make a module of 600x600mm . cross tees having length more than 600mm are to be supported independently. finally ecophon akostika high density compressed fiber glass tiles with tegular / square edge and 15 mm thickness, easily demountable tile, visible surface of each tile is 7 mm below the grid, manufactured from high density glass wool, light weight, high strength, visible surface is a batch painted glass tissue in white / black, back of the tile covered with glass tissue. size 595mm x 595mm x 15mm / 1195mm x 1195mm x15mm and having 0.90 noise reduction coefficient as per astm c 423, shall have minimum 90 rh, acoustic sound absorption avg. as per en iso 354 for ecophone shall be 0.95 at 200 mm ods for akostika it shall be 0.81 at 300 mm ods, tested and classified as non combustible product.,medium density fiber panel false ceiling : providing and fixing medium density perforated / non perforated square / tengular edged panel false ceiling panels are made from medium density engineer wood with melamine / wood polish finished facing having size of 595mm w x 595mm l x 12mm thickness. panel shall have 0.16 w/mk k value with different types of perforation (4% to 15%) in symmetric form having patterns like round, round & capsule, irregular round, long capsules, inter sections of over lapping circles as per availability and requirement of authority, non woven tissue on back side for superior acoustic performance. the panels are fixed by lay in ceiling installation systems by using inter locking (gyptech or equivalent)15mm / 24mm plain center black precoated gi t grid system in 600x600mm module made from hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive, which includes main runner and cross “tâ€. ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers shall fitted. than suspending 3000mm / 3600mm l x 15/24w x 32mmh x 0.30mm thick main "t" runner by using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12 mm dia and 38mm long dash fasteners, 16 gauge gi wire / 4mm gi adjustable rods with galvanized butterfly level clips (if required) of size 85 x 30 x 0.8 mm at 1200mm c/c, and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick is then interlocked into the pre cut slots in the main tees at 600mm centers in direction perpendicular to the main tee to make a grid of 600x 1200mm. finally 600mm long secondary cross "t" of size 15/24x25mm x 0.30mm thick are then interlocked into the pre cut slots in the middle of 1200x600 grid and in direction parallel to the main tee to make a module of 600x600mm . cross tees having length more than 600mm are to be supported independently.,mdf glass fiber composite panel false ceiling : providing and fixing mdf glass fiber composite perforated square / tengular edged panel false ceiling, panels are made from medium density engineer wood with pre painted facing and high density glass fiber padding and non woven fabric back covering having size of 595mm w x 595mm l x 18mm thickness. panel shall have 0.16 w/mk k value, as per astm c 423 noise reduction coefficient should 0.75 and sound absorption avg. should 0.72 with different types of perforation (4% to 15%) in symmetric form having patterns like round, round & capsule, square as per availability and requirement of authority, acoustic tissue on back side for superior acoustic performance. the panels are fixed by lay in ceiling installation systems by using inter locking (gyptech or equivalent) 15mm / 24mm plain center black precoated gi t grid system in 600x600mm module made from hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive, which includes main runner and cross “tâ€. ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers shall fitted. than suspending 3000mm / 3600mm l x 15/24w x 32mmh x 0.30mm thick main "t" runner by using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12 mm dia and 38mm long dash fasteners, 16 gauge gi wire / 4mm gi adjustable rods with galvanized butterfly level clips (if required) of size 85 x 30 x 0.8 mm at 1200mm c/c, and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick is then interlocked into the pre cut slots in the main tees at 600mm centers in direction perpendicular to the main tee to make a grid of 600x 1200mm. finally 600mm long secondary cross "t" of size 15/24x25mm x 0.30mm thick are then interlocked into the pre cut slots in the middle of 1200x600 grid and in direction parallel to the main tee to make a module of 600x600mm . cross tees having length more than 600mm are to be supported independently.,fiber cement panel false ceiling : providing and fixing fiber cement square edged panel false ceiling, panels are made from pre painted fiber cement with face side different textured in accordance with indian green building council having size of 595mm w x 595mm l x 4mm thickness. panel shall have 0.15 w/mk k value, non combustible with fire resistant as per bs 476, impact resistant, moisture resistant tested as per is 14862, termite proof. the panels are fixed by lay in ceiling installation systems by using inter locking (gyproc or equivalent) 15mm / 24mm plain center black precoated gi t grid system in 600x600mm module made from hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive, which includes main runner and cross “tâ€. ppgi wall angle of size 22x19mm / 24x24mm x 0.4mm thick along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers shall fitted. than suspending 3000mm / 3600mm l x 15/24w x 32mmh x 0.30mm thick main "t" runner by using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12 mm dia and 38mm long dash fasteners, 16 gauge gi wire / 4mm gi adjustable rods with galvanized butterfly level clips (if required) of size 85 x 30 x 0.8 mm at 1200mm c/c, and not more than 150mm from spliced joints. the last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall 1200mm long cross "t" of size 15/24x25mm x 0.30mm thick is then interlocked into the pre cut slots in the main tees at 600mm centers in direction perpendicular to the main tee to make a grid of 600x 1200mm. finally 600mm long secondary cross "t" of size 15/24x25mm x 0.30mm thick are then interlocked into the pre cut slots in the middle of 1200x600 grid and in direction parallel to the main tee to make a module of 600x600mm . cross tees having length more than 600mm are to be supported independently.,false ceiling : providing and fixing 12mm thick rigidlam pvc "u" shape patta for grid type false ceiling etc complete.,false ceiling : providing and fixing 5mm. thick solid prelam pvc 600mm x 600mm grid type false ceiling by using frame work of "t" section, “l†section g.i. hook, g. i. wire and 6mm. road as per requirement etc. comp.,10 mm thick high density decorative pvc falls ceiling fluted panel : for providing fixing and supplying 10 mm thick high density decorative pvc fluted falls ceiling the decorative grew panel section should be 10 mm ( +/ 0.15mm) thick ,having size of 300 mm x 10 mm manufactured by iso 9000 2015 company poly wood equitant inner frame of gi chanel framing . the g.i chanel section shall be fixed to the l section of 15mm x 15mm slab using 30 mm long m.s. self drilling through the groove in the strip by using pvc fasteners. the distance between two screws shall not be more than 600 mm. the fluted grew section fix over on gi frame by self drilling screw the joint of two panels for aesthetic looks. the exact size of the panel and correspondingly of grid may be vary depending on the size of the wall. entire work should be done in true line level and maintain aesthetic value as directed by engineer in charge,celuka ply solid pvc internal designer door with frame : providing and fixing 25mm thick solid prelam pvc designer door with frame size 225mm x 35mm with wall thickness of 15mm celuka ply. shutter should 15mm celuka rigidlam ply with both side 5mm prelam pvc sheet with 15mm x 15mm galvanized square tube of 18 gauge for frame work of extra strength of door with necessary solvent cement with all s.s. fixture and fastening with handles / lock etc complete.,solid pvc designer office door : providing and fixing 25mm thick prelam pvc designer door using 15mm celuka ply with both side 5mm prelam pvc sheet with 15mm x 15mm galvanized square tube of 18 gauge for extra strength of door with necessary solvent cement with all s/s fixtures & fastening with europa handle / locks etc. complete.,partly glaze partly prelam pvc designer door : providing and fixing 30mm thick partly glaze partly solid prelam pvc door shutter using 15mm rigidlam celuka ply with both side prelam pvc and 5mm thick glass with galvanized square tube of size 15mm x 15mm square tube of 18 gauge for extra strength of door with necessary solvent cement with all s.s. fixture and fastening with europa lock and door closer etc. comp.,partly glaze partly prelam pvc door : providing and fixing 30mm. thick partly glazed partly solid prelam pvc door shutter made from galvanized square tube 18 gauge of 19mm x 19mm for styles and 15mm x 15mm for top & bottom rails covered by heat molded prelam pvc “c†channel. the inner panel should be inserted with 5mm glass & 5mm solid prelam pvc sheet sealed with solvent cement adhesive with all s/s fixtures & fastening with door closer etc. complete.,entry lobby gate : providing and fixing 50 mm thick partly prelam pvc and partly glaze solid pvc door with fixed prelam pvc partition with frame work of 30mm x 30mm galvanized square tube of 18 gauge covered with 5mm thick heat molded prelam pvc sheet fixing top panel plain glass 5mm thick plain modiguard including fixing s/s fixtures & fastening with door closer etc. complete.,solid prelam pvc frame : providing and fixing prelam pvc door frame of size 50mm x 47mm with a wall thickness of 5mm made out of 5mm pvc prelam sheet miter cut corners 2 no. of 150mm long brackets of 15mm x 15mm galvanized square tube of 18 gauge the vertical door profiles to be reinforced with 19mm x 19mm galvanized square tube of 18 gauge epdm rubber gasket weather seal to be provided through out the frame etc. complete.,solid prelam pvc door : providing and fixing 30mm. thick single side prelam pvc door shutter (conforming to criteria of testing as per is 4020 with up to date amendments) shutter made from galvanized square tube of 18 gauge thickness and size 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails covered by heat molded pvc “c†channel of 5mm thick single side prelam sheet. the inner panel should be inserted with prelam sheet sealed with solvent cement adhesive with fixture and fastening etc. complete.,solid prelam pvc window frame : providing and fixing solid prelam pvc window frame of size 50mm. x 43mm. with wall thickness of 5mm made out of 5mm prelam pvc rigid sheet miter cut at four corners and welded with 15mm x 15mm galvanized square tube of 18 gauge in four corners. the window frame is reinforced with 15mm x 15mm galvanized square tube with fixtures and fastening etc. complete.,solid prelam pvc window : providing and fixing 25mm. thick solid prelam pvc window shutter made out of galvanized square tube of 18 gauge of size 15mm x 15mm for styles & rails and covered with 5mm thick heat molded “c†channel having width of 38mm to from styles and rails. on either side the inner panel any is of 5mm prelam pvc sheet or 5mm thick glass or acrylic as desired. the panel is inserted and sealed with solvent cement adhesive to the "c" channel and provided with 5mm x 25mm pvc sheet beading on all sides with fixtures and fastening etc. complete.,prelam pvc sliding window shutter : providing and fixing 25 mm thick prelam solid pvc sliding window made out of 12mm thick plastic ply for “e†channel & galvanized square tube of 18 gauge of 15mm x 15mm for style & rails covered with 5mm thick heat molded "c" channel with of 38mm to form styles and rails on either side. the inner panel may be 5mm pvc sheet or glass as desired. the panel is inserted & sealed with solvent cement to the "c" channel and 12mm rigidlam celuka pvc ply frame shall covered with 5mm pvc sheet on front sides with fixtures & fastening etc. complete.,partition door : p/f pvc (sintex or equivalent hollow section) made door with pvc section (250 x 6 mm) on framing of erw steel tube 25 x 25 mm including necessary fixture & fastening such both side with as lock, handle, door closer etc. comp.,entry lobby door : p/f 50 mm thick partly pvc (sintex or equivalent hollow section) made paneled and partly glazed allu. door with fixed partition with outer frame 65 x 40 mm style section & on two side and double or single shutter with shutter frame top & middle rail of 50 x 50 mm section and bottom rail of size 100 x 50 mm incl. fixing top panel plain glass 5 mm thick plane modi guard make and bottom panel of 250 x 12 mm thick pvc prelam section with necy. allu. beading, rubber packing etc. incl. fixing s/s hinges, handle, lock, door closer and door catcher etc. comp.,bath & toilet door : supply & fixing pvc (sintex or equivalent hollow section) made readymade door with panel section 20 mm thick panel door with outer frame of size of 59 x 24 mm with inside polymeric reinforcement corner, ss hinges & aluminum aldrap, tali etc. comp.,bath & toilet door : supply & fixing pvc (sintex or equivalent hollow section) made readymade door with frame of size of 40 x 48 and panel section 20 mm thick panel door with outer frame of shutter size of 59 x 24 mm with inside polymeric reinforcement corner, ss hinges & aluminium hal draf, tali etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made royal door 35 mm thick with (sintex or equivalent hollow section) section flush type door inside puff and fix with end cap and one side designer bidding with handle type locks etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made door of 28 mm thick section 20 mm thick with required inside polyurethane foam and shutter outer frame of size of 59 x 28 mm with ss hings, haldrafts, tadi, handle etc. comp.,p/f 25 mm thick prelam pvc (sintex or equivalent hollow section) make pvc frp door with inside poly urethane foam with reinforcement of steel wire mesh in frp sheets and pvc strips for fittings including all fixture etc. comp.,p/f 25 mm thick prelam pvc (sintex or equivalent hollow section) make pvc frp door with outer frame of 53 x 60 multi chamber hollow section and frp door with inside poly urethane foam with reinforcement of steel wire mesh in frp sheets and pvc strips for fittings including all fixture etc. comp.,p/f 50 mm thick partly pvc (sintex or equivalent hollow section) made partly panelled and partly glazed allu. door shutter with top rail and style section of 50 x 50 mm middle rail section and bottom rail of size 100 x 50 mm incl. fixing top panel plain glass 5 mm thick one side visible modi guard make and bottom panel of 250 x 12 mm thick pvc prelam section with necy. allu. beading, rubber packing etc. incl. fixing s/s hinges, handle, lock, door closer and door catcher etc. comp.,p/f 50 mm thick partly pvc (sintex or equivalent hollow section) made partly panelled and partly glazed allu. door shutter with rail and style section of 50 x 50 mm middle rail section and bottom rail of size 100 x 50 mm incl. fixing top panel plain sun glass 5 mm thick modi guard make and bottom panel of 250 x 12 mm thick pvc prelam section with ney. allu. beading, rubber packing etc. incl. fixing s/s hinges, handle, lock, door closer and door catcher etc. comp.,p/f 50 mm thick partly pvc (sintex or equivalent hollow section) made party panelled and partly glazed allu. door shutter with frame section 65 x 40 mm with shutter frame top rail and style section of 50 x 50 mm middle rail section and bottom rail of size 100 x 50 mm incl. fixing top panel plain glass 5 mm thick one side visible modi guard make and bottom panel of 250 x 12 mm thick pvc prelam section with necy. allu. beading, rubber packing etc. incl. fixing s/s hinges handle, lock, door closer and door catcher etc. comp.,openable windows : p/f pvc (sintex or equivalent hollow section) made openable type window with 40 x 48 section and glaze bidding of 19 mm for rubber gasket special type hinges for openable and handle for locking arrangement available in glossy furnished with glass or smc sheet.,40mm thick solid prelam pvc full glass door : providing and fixing 40mm thick fully glazed designer door using 15mm thick celuka pvc ply with "c" chanel of 5mm prelam pvc sheet using 30mm x 30mm g.i. square tube of 18 gauge for extra strength of door with necessary solvent cement with all s.s. fixture and fastening etc. comp.,wpc frame : providing and fixing factory made 100 % solid wood plastic composite (wpc) door frame 90mm x 45mm made from wood plastic composite (single extruded process) material with density 780 kg/ cbm and manufactured by an iso 9001 2015 certified company all as per directed by engineer in charge.,three layer solid pvc co extruded both side laminated 24mm door : providing and fixing factory made 100 % solid pvc 24mm thick flush door shutter made from co extruded three layer rigid pvc foam sheet (single extruded) with density not less than 600 kg/cbm outer layer (0.8 1mm) thick should be of rigid pvc with density of not less than 1400 kg/cbm manufactured by an iso 9001 2015 certified company. both surface to be laminated with 0.25mm thick pvc film with suitable adhesive and all as per directed by engineer in charge. door should be 100% water proof, termite proof, fire retardant and having good screw holding capacity.,three layer solid pvc co extruded both side laminated 28mm door : providing and fixing factory made 100 % solid pvc 28mm thick flush door shutter made from co extruded three layer rigid pvc foam sheet (single extruded) with density not less than 600 kg/cbm outer layer (0.8 1mm) thick should be of rigid pvc with density of not less than 1400 kg/cbm manufactured by an iso 9001 2015 certified company. both surface to be laminated with 0.25mm thick pvc film with suitable adhesive and all as per directed by engineer in charge. door should be 100% water proof, termite proof, fire retardant and having good screw holding capacity.,membrane coated multi chambered hollow pvc section cabinet or loft shutter or cup board shutter : providing, supplying & installation of membrane coated multi chambered hollow pvc section cabinet or loft shutter with iso 9001 certified “poly wood“ or equivalent and membrane coated poly vinyl chloride extruded section of heavy grade. both the wall thickness of infill panel must be 1.5 to 1.8 mm minimum. the framing section should be of same brand and having size of 65mmx24mm section. the section used for outer frame should be reinforced with seasoned wood of required size. for assembling of outer frame solid heavy density polymeric corner having size of 200mmx85mmx25mm should be used at four corners .aluminum" cleat or section having size of0.5mm x 25 mm x 25mm should be used to fixed the outer frame to wall of the cabinet or loft. the shutter frame should be membrane coated “poly wood “or equivalent and poly vinyl chloride extruded section having size of 40mm x 24 mm section code or 30mm x 60 mm section code. for assembling of outer frame solid heavy density polymeric corner having size of 200mmx 85mmx25mm should be used at four corner for each the infill panel should be 20mmthick membrane coated polyvinyl chloride multy chambered hollow plastic section in one piece only “poly wood “or equivalent. to give flush look of shutter instead of shutter framing 20mm wide beading cap can be with required hinges, magnate, handel 75mm x 6mm e.t.c. complete. entire work should be done in true line level and maintain aesthetic value as directed by engineer in charge,28 mm thick pvc laminated flush door : providing, supplying & installation of pvc laminated door all the profile used for door fabrication should be “poly wood “or equivalent and heavy grade not economy series . both the wall thickness of infill panel must be 1.8 mm minimum .the outer frame of door should be having size 30 mm /24 mm. the panel should be 28mm thick pre laminated poly vinyl chloride multi chambered hollow plastic section in one piece only. to fix hinge at side of shutter frame and to handle or knob with accessory required reinforcement should be 15 mm x 300 mm solid heavy density polymeric piece. three nos or required number of hinges should be of 75 mm x 19 mm x 19 mm stainless steel with quality zinc plated screw having size of 16 mm x 06 mm or required size in required quantity. two number of approved quality 125 mm x 15 mm stainless steel handle, two nos. of s.s. aldraf having size of 200 mm x 10mm should be with all required accessory. care should take while installing hardware all screws should be through in reinforcement. all gap and panel and channel should be joined using "thanga bond†adhesive or equivalent.,upvc window sliding type 2 track upvc window : supplying and fixing factory made polywood or equivalent upvc 2 track window with wall thickness 1.4mm ± 0.25mm made out of extruded section plain upvc sections 100% termite proof water proof with sound and noise reduction epdm gasket section high gloss long lasting section with essay operated smoothly without making noise. the window frame made out of rigid upvc sections poly wood or equivalent size 55 x 35mmmain frame section meter cut at 4 corners & joint with plastic fusion welding of main frame with internal gi reinforce if required. the shutter section made out of extruded rigid upvc section 35 x40mm with internal reinforced with provision of 5mm glaze with glass biding 25 x15mm with epdm gasket. the window shall be fixed to the wall using 100mm long pvc fasteners with screw at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and design and direction of engineer in charge.,tailor made multipurpose wooden storage : providing and fixing of tailor made multipurpose wooden storage made from 18 mm plywood with both side 1.0 mm thick lamination and two side post forming & two side pvc lapping or all side pvc lapping on top. storage shall have 457mm depth, height and width will be as per requirement, glossy / ss finished post forming or pvc edge bidding finished door with lock and handle, adjustable shelves and one locker with lock as per requirement, back side of cupboard is made from both side laminated 8 mm plywood, shelves of storage will be made from both side laminated 18 mm plywood or 12mm plain glass. glassing of 5 mm normal plain glass with necessary hardware shall be done in door of storage on demand of concern authority. measurement will be taken as total height of storage x total width of storage = total sq.mtr. of storage.,cupboard shutter with frame : providing and fixing solid prelam pvc cupboard shutter with frame for cupboard using 12mm rigidlam celuka pvc ply for shutter and 15mm rigidlam celuka pvc ply for frame covered by 5mm thick prelam pvc sheet with necessary adhesive with s.s. fixture and fastening with handle / lock etc comp.,rigidlam cupboard : providing and fixing solid prelam pvc rigidlam cupboard consisting of 15mm solid rigidlam celuka pvc ply frame and shutter with vertical & horizontal slaves of 15mm rigidlam celuka pvc ply, covered 5mm solid prelam pvc sheet with solvent and with s.s. fixture and fastening handle / lock etc. complete drawer should be extra. depth 0.45 meter.,supply & fixing pvc (sintex or equivalent hollow section) made office cupboard for office use size : 1.80 x 0.90 x 0.45 with side section of size of 20 mm thick inside horizontal & vertical self of 20 mm thick section of inside two drawer in center of cupboard with required lock, handle etc. comp.,p/f pvc (sintex or equivalent hollow section) made cupboard shutter with prelam section 20 mm and shutter frame and outer frame size of 40 x 48 mm etc. comp.,p/f pvc (sintex or equivalent hollow section)made cupboard shutter with prelam section 20 mm thick and end cape of 311 section and outer frame size of 32 x 38 mm etc. comp.,self for vertical & horizontal with extra strength pvc section : supply & fixing heavy duty pvc multy chamber hollow section of 25 mm thick hollow section self with require suitable pvc reinforcement for extra strength use for loft or cup board self fix by side support of ( box section fully reinforced by pvc polymeric reinforce meant size 28mm x 40 mm by using self taping screw and thanga bond adhesive or equivalent .,tailor made multipurpose plb platform desk, providing and fixing of tailor made multipurpose platform desk made from wood base plb having size as per requirement, top is made from 25 mm wood base plb with 0.8 mm (+/ 0.1) lamination on outer side and two side post forming & two side pvc lapping / all side pvc lapping, one side (front or back) is covered up to 600 mm from top to bottom with 17 mm wood base plb, vertical under supports (as per requirement of stability according to width and length) are made from 17 mm wood base plb, drawer or key board try or self under top should be provided as per requirement, pvc lapping as per requirement, measurement will be taken as total length of platform top x width of platform top = total sq.mtr. of platform.,laboratory platform shutter with frame, providing and fixing solid prelam pvc platform shutter with frame for platform using 12mm rigidlam celuka pvc ply for shutter and 15 mm rigidlam celuka pvc ply for frame covered by 5mm thick prelam pvc sheet with necessary adhesive with s.s. fixture and fastening etc comp.,p/f pvc (sintex or equivalent hollow section) made platform of of 25 mm thick pvc section including vertical support at 0.75 mt. center to center including fixing the support to wall and floor etc. comp.,rigidlam prelam pvc platform, providing and fixing solid rigidlam prelam pvc platform made out of 15mm rigidlam celuka solid pvc ply for framework with vertical partition & horizontal slaves. 5mm prelam pvc sheet covered on top and both side of platform. using 15mm x 15mm galvanized square tube of 18 gauges for extra strengthening of top and salves with necessary stainless steel fixture and fastening etc complete. drawer should be extra. height 0.75 meter.,rigidlam prelam pvc platform : providing and fixing solid rigidlam prelam pvc laboratory platform made out of 15mm rigidlam celuka solid pvc ply for framework with vertical partition & horizontal slaves. 15mm granite on top and 5mm prelam pvc on both side of platform. using 15mm x 15mm galvanized square tube of 18 gauges for extra strengthening of top and shelves with necessary stainless steel fixture and fastening etc complete. drawer should be extra. height 0.75 meter,tailor made plb base conference / dais table : providing and fixing of tailor made conference / dais table in different shape made in one or more parts having total length and width as per requirement, with / without serving gape, equal usable top width on all parts of table, top is made from wood base plb with 0.8 mm (+/ 1) lamination on outer side having all side 34 mm edge border with two side post forming & two side pvc lapping / all side pvc lapping, one hydraulic d. p. (if required) with different types of sockets shall be fitted in the center of top, self under the top, legs are made from 25 mm plb wood base, front side is closed up to 600 mm made from 17 mm plb wood base, dual tone finished. measurement will be taken as total length of usable table top x total width of usable table top = total sq.mtr. of conference table.,tailor made multipurpose plb office desk : providing and fixing of tailor made multipurpose office desk made from wood base plb having size as per requirement, top is made from 25 mm wood base plb with 0.8 mm (+/ 0.1) lamination on outer side and two side post forming & two side pvc lapping / all side pvc lapping, front side is covered up to 600 mm from top to bottom with 17 mm wood base plb, vertical under supports (as per requirement of stability according to width and length) are made from 17 mm wood base plb. one side storage cabinet and drawer with lock and handle should provided, pvc lapping as per requirement etc. complete. measurement will be taken as total length of table top x total width of table top = total sq.mtr. of table,tailor made wooden executive desk : providing and fixing of tailor made plywood based wooden executive desk in different shape of top with 38mm front horizontal and vertical edges made from 18mm plywood having size as per requirement, top is made from 18 mm plywood having both side 1.0 mm thick lamination with two side post forming & two side pvc lapping or all side pvc lapping, front side is covered from top to bottom with 18 mm both side laminated 1.0 mm thick plywood, both end vertical under supports are having width equal to top width with maximum 50mm variation. while inner supports (as per requirement of stability according to width and length) having width should be less than or equal to 150mm of top width are made from 18 mm both side laminated (1.00 mm) plywood, adjoin or separate facility of one storage cabinet and drawer or all drawers having 12mm plywood base and lock & handle should provided, pvc lapping as per requirement etc. complete. measurement will be taken as total length of desk top x total width of desk top = total sq.mtr. of desk,rigidlam prelam pvc table/ conference table : providing and fixing solid rigidlam prelam pvc exe. table/ table/ conference table or computer table using 15mm rigidlam celuka pvc ply for framework with vertical partition & horizontal slaves. 5mm prelam pvc sheet covered on top and both side of table. using 15mm x 15mm galvanized square tube of 18 gauges for extra strengthening of top and salves with necessary stainless steel fixture and fastening etc complete. drawer should be extra. height 0.75 meter.,rigidlam prelam pvc drawer : providing and fixing solid rigidlam prelam pvc drawer consisting of 15mm thick rigidlam celuka pvc ply vertical partition and horizontal side with telescopic channel with necessary adhesive and s.s. fixture and fastening etc comp. depth 0.15 meter.,p/f pvc (sintex or equivalent hollow section) make keyboard drawer with section of size 0.75 x 0.30 x 0.08 mtr. including cost of necessary fixture such handle etc. comp.,supply & fixing executive table of size 1.22 mtr. x 0.65 mtr. pvc (sintex or equivalent hollow section) made with drawer & openable shutter and back side file cabinet size 1.25 x 1.22 mtr. as per detail drawing and design and revolving sitting system,supply & fixing executive table of size 1.22 mtr. x 0.75 mtr. pvc (sintex or equivalent hollow section) made with drawer & openable shutter and back side file cabinet size 1.25 x 1.22 mtr. as per detail drawing and design and revolving sitting system,supply & fixing pvc (sintex or equivalent hollow section) made executive table size of table 1.22 x 0.75 mtr. (side section of table of 20 mm thick multi chamber hollow section seats and top 25 mm thick of mdf board) with one side drawer and openable cabinet of 20 mm thick plastic section with low height revolving chair of fiber base revolving stand and puff handle etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made executive table size of table 1.22 x 0.75 mtr. (side section of table size of 20 mm thick multi chamber hollow section seats and top 25 mm thick of mdf board) with one side drawer and openable cabinet of 20 mm thick plastic section etc. comp. (only table),supply & fixing pvc (sintex or equivalent hollow section) made executive table size of table 1.50 x 0.90 mtr. (side section of table of 20 mm thick multi chamber hollow section seats and top 25 mm thick of mdf board) with one side drawer and openable cabinet of 20 mm thick plastic section etc. with executive full height revolving chair of fiber stand and pu handle etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made executive table size of table 2.15 x 0.90 x 0.75 mtr. (side section of table size of 20 mm thick multi chamber hollow section seats and top 25 mm thick of mdf board) with two side cabinet and drawer of size of 20 mm thick plastic section etc. with full height revolving chair of fibre stand and pu handle etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made conference table (side table) size of table 0.60 width and length 1.80 mtr. and height 0.75 (sintex or equivalent hollow section) section size of 20 mm thick for vertical support and side cover by 250 x 6 mm, top of table section 20 mm thick etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made conference table half round (main table) for executive seating width 0.60 and half round total length 2.10 with required vertical support etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made corner table side section of size of 20 mm thick and bottom section of size of 15 mm thick size : 0.75 x 0.75 mtr. with open able shutter for three seater and two seater sofa set etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made round center table size : 0.60 dia, height : 0.50 top of table glass plain type 8 mm thick base stand of plastic section 20 mm thick cross design section etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made rectangular center table size : 0.75 x 0.45 x 0.50 top of table glass plain type 8 mm thick base stand of plastic section 20 mm thick cross design section etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made computer table (for computer use) size : 0.90 length x 0.60 width x 0.75 height side cover by size of 20 mm thick multi chamber hollow section required self for cpu & printer with cd drawer & keyboard drawer etc. comp.,tailor made multipurpose wooden office desk : providing and fixing of tailor made multipurpose plywood based wooden office desk with 38mm front and back horizontal and / or vertical edges made from 18mm plywood having size as per requirement, top is made from 18 mm plywood having both side 1.0 mm thick lamination with two side post forming & two side pvc lapping or all side pvc lapping, front side is covered up to 600 mm from top to bottom with 18 mm both side laminated 1.0 mm thick plywood, vertical under supports (as per requirement of stability according to width and length) are made from 18 mm both side laminated (1.00 mm) plywood, one side storage cabinet and drawer with lock and handle should provided, pvc lapping as per requirement etc. complete. measurement will be taken as total length of desk top x total width of desk top = total sq.mtr. of desk,tailor made plywood base conference / dais table : providing and fixing of tailor made conference / dais table in various shape made in one or more parts having total length and width as per requirement, with / without serving gape, equal usable top width on all parts of table, top is made from 18mm plywood having 38mm edges with both side 1.0 mm thicklamination having two side post forming & two side pvc lapping or all side pvc / lamination lapping, one hydraulic d. p. (if required) with different types of sockets shall be fitted in the center of top, both end vertical under supports of each parts are having width equal to top width with maximum 50mm variation. while inner supports (as per requirement of stability according to width and length) having width less than or equal to 150mm of top width are made from 18 mm both side 1.00 mm thick laminated plywood, self under the top and legs are made from 18 mm both side laminated 1.00 mm thick plywood, front side is closed up to 600 mm made from 18 mm both side laminated plywood, single / dual tone finished. measurement will be taken as total length of usable top x total width of usable top = total sq.mtr. of conference / dais table.,tailor made multipurpose plywood based wooden platform desk : providing and fixing of tailor made multipurpose wooden platform desk made from 18mm plywood having size as per requirement, top is made from 18 mm plywood having 38mm edges with both side 1.0 mm thick lamination with two side post forming & two side pvc lapping or all side pvc / lamination lapping, one side (front or back) is covered up to 600 mm from top to bottom with 18 mm both side laminated 1.00 mm thick plywood, vertical under supports (as per requirement of stability according to width and length) are made from 18 mm both side laminated 1.00 mm thick plywood, drawer or key board try or self under top should be provided as per requirement, pvc lapping as per requirement, measurement will be taken as total length of platform top x total width of platform top = total sq.mtr. of platform.,tailor made multipurpose plb desk : providing and fixing of tailor made multipurpose desk made from wood base plb having size as per requirement, top is made from 25 mm wood base plb with 0.8 mm (+/ 0.1) lamination on outer side and two side post forming & two side pvc lapping / all side pvc lapping, front side is covered up to 600 mm from top to bottom with 17 mm wood base plb, vertical under supports (as per requirement of stability according to width and length) are made from 17 mm wood base plb. one side storage cabinet and drawer with lock and handle should provided, pvc lapping as per requirement etc. complete. measurement will be taken as total length of table top x total width of table top = total sq.mtr. of table,tailor made multipurpose wooden desk : providing and fixing of tailor made multipurpose plywood based wooden desk with 38mm front and back horizontal and / or vertical edges made from 18mm plywood having size as per requirement, top is made from 18 mm plywood having both side 1.0 mm thick lamination with two side post forming & two side pvc lapping or all side pvc / lamination lapping, front side is covered up to 600 mm from top to bottom with 18 mm both side laminated 1.00 mm thick plywood, vertical under supports (as per requirement of stability according to width and length) are made from 18 mm both side laminated 1.00 mm thick plywood, one side storage cabinet and drawer with lock and handle should provided, pvc lapping as per requirement etc. complete. measurement will be taken as total length of desk top x total width of desk top = total sq.mtr. of desk,gypsum board partition : supplying and fixing 75 mm thickness partition in accordance with green building act with eco friendliness, fire resistant, heat penetration, sound absorption, joint less, 1220mmw x 1830mml with 1 mm variation and 12.5 mm thickness (gyproc or equivalent) plain gypsum board. by using strapped c stud is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 48mm x 34mm x 36mm x 0.50mm and f & c channel is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 50mm x 32mm x 32mm x 0.50mm, fitted on ceiling and / or wall and floor by pvc grip p rawl plug, coach bolt / screw as per requirement. finally anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed should be done on both side. glassing of 5 mm normal plain glass with necessary hardware should be done in partition on demand of concern authority.,cemented board partition : supplying and fixing 65 mm thickness partition by using 8 mm fiber cement board having characteristics of eco friendliness, non combustible with fire resistant as per bs 476, impact resistant, moisture resistant tested as per is 14862, 35db (+/ 0.01) sound insulation, termite proof, 8.0 mm thickness fiber cemented board in accordance with indian green building council. by using strapped c stud is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 48mm x 34mm x 36mm x 0.50mm and f & c channel is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 50mm x 32mm x 32mm x 0.50mm, fitted on ceiling and / or wall and floor by pvc grip p rawl plug, coach bolt / screw as per requirement. finally anti fungal shield dust proof, stain resistance, durable, smoother finish, plastic emulsion paint as directed should be done on both side. glassing of 5 mm normal plain glass with necessary hardware should be done in partition on demand of concern authority.,solid prelam pvc partition : providing and fixing 40mm thick prelam solid prelam pvc partition using 30mm. x 30mm. galvanized square tube of 18 gauge covered by 5mm prelam pvc sheet for frame work and inner panel should be stuck on both side 5mm solid prelam pvc sheet etc. comp.,50mm thick solid prelam pvc semi height partition : providing and fixing 50mm thick semi height solid prelam pvc partition consisting of 40mm sandwich prelam pvc panel made out of 30mm thick solid pvc ply stuck on both side 5mm thick prelam pvc sheet reinforced with frame work made from 40mm x 40mm galvanized square tube of 18 gauge frame 5mm thick prelam pvc heat molded prelam pvc channel of size 50mm x 100mm with feathered hedges be fixed on the floor as per directed etc. complete.,partly glaze / partly prelam pvc partition : providing and fixing 40mm thick partly glazed / partly prelam pvc partition using 30mm x 30mm. galvanized square tube of 18 gauge covered by 5mm prelam pvc ‘c’ channel for frame and inner panel may be stuck on both side 5mm solid prelam pvc sheet and 5mm. glass etc comp.,pvc partition : p/f pvc (sintex or equivalent hollow section) made partition with (both side paneling) on steel tube 250 x 6 mm section joint with screws on steel tube with tug and grew.,pvc partition : p/f pvc (sintex or equivalent hollow section) made partition with one piece moulded hollow section sheets of 760 x 20 mm frame with end cape with prelam design.,glass partition : p/f fully glazed partition of 5 mm thick one side visible glass of modi guard make 1st quality with pvc (sintex or equivalent hollow section) frame of (53 x 60) for side and t section 53 mm x 70 mm for center with required glass bedding 40 mm size rubber gasket both sides etc. comp.,glass partition : p/f fully glazed partition or glass portion of partition pvc (sintex or equivalent hollow section) made section 40x48 with required rubber glazed bidding and glass of 5 mm thick color glass(grey or black) of modi guard make 1st quality etc. comp.,partition for prefab building : providing and fixing 57mm thick solid pvc partition for prefab building for wall and ceiling using 40mm x 40mm galvanized square tube 18 gauge for framing and 12mm thick rigidlam celuka ply outside and inside 5mm thick prelam pvc sheet and 40 mm thick e.p.s. screwed into the wall as required including all joints and junctions covered by 5mm thick prelam pvc sheet with solvent cement and fixing in position with 25mm thick fully glass window and 25mm thick prelam pvc door as per requirement etc. comp. as directed by e.i.c.,fully glazed partition : providing and fixing solid 50mm thick solid prelam pvc fully glazed partition using 30mm x 30mm galvanized square tube of 18 gauge covered by 5mm. prelam pvc sheet for frame work and inner panel should be 8mm thick glass with necessary solvent cement with all s.s. fixture and fastening etc. comp.,mdf board partition : providing and fixing 75mm thick partition by using medium density perforated / plain board (gyptech or equivalent) on both side of partition, boards are made from medium density engineer wood with groove lining / non groove lining, melamine / wood polish / pre laminated finished facing having size of 1220mm w x 1830mm l x 12mm thickness. board with plain finished or different types of perforation (4% to 15%) in symmetric form having patterns like round, round & capsule, irregular round, long capsules, inter sections of over lapping circles as per availability and requirement of authority in 610mm x 610mm equal blocks on panel and non woven tissue on back side for superior acoustic performance. the panels are fixed with exposing groove / covering joints, edges and corners by using wooden or pvc molding. by using strapped c stud is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 48mm x 34mm x 36mm x 0.50mm and f & c channel is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 50mm x 32mm x 32mm x 0.50mm, fitted on ceiling and / or wall and floor by pvc grip p rawl plug, coach bolt / screw as per requirement. glassing of 5 mm normal plain glass with necessary hardware should be done in partition on demand of concern authority.,aluminum composite panel partition : providing and fixing of aluminum composite panel sandwich type partition by using 3.0 mm thick having actual 0.18mm top skin, 2.64mm ldpe core thickness & 0.18mm bottom skin aluminum composite panel on both side of partition, total inner structure should be made by using 38mm x 25mm x 1.6mm gi square pipe, structure should be done by placing gi square pipe on periphery of partition center end to floor, wall, ceiling / top than plant 600mm c/c vertical and 1200 mm c/c horizontally gi square pipe to complete plumb and level structure. gi square pipe should be fixed with metal screw as per requirement. finally 3.0 mm thick (eurobond or equivalent) above mentioned characterized aluminum composite panel shall be apply on both side of partition, for filling joints good quality of silicon and other necessary materials should be used. glassing of 5 mm normal plain glass with necessary hardware & bidding should be done in partition on demand of concern authority.,aluminum composite panel partition : providing and fixing of fr aluminum composite panel sandwich type partition by using fire retardant 3.0 mm thick with actual 0.10mm top and bottom skin made from alloy 3xxx/5xxx with kynar 500 pvdf/feve lacquered surface on front and service coated on the rear and 2.80mm thick middle mineral core of fire resistant minerals (ath and / or mdh) filled core panel on both side of partition, total inner structure should be made by using 38mm x 25mm x 1.6mm gi square pipe, structure should be done by placing gi square pipe on periphery of partition center end to floor, wall, ceiling / top than plant 600mm c/c vertical and 1200 mm c/c horizontally gi square pipe to complete plumb and level structure. gi square pipe should be fixed with metal screw as per requirement. finally 3.0 mm thick (eurobond or equivalent) above mentioned characterized aluminum composite panel shall be apply on both side of partition, for filling joints good quality of silicon and other necessary materials should be used. glassing of 5 mm normal plain glass with necessary hardware & bidding should be done in partition on demand of concern authority.,plywood based wooden partition : providing and fixing 68mm thick partition with both side 8 mm plywood board having 1 mm lamination on outer side with covering polished wooden bidding / pvc bidding / lamination on all open edges. inner structure and frame shall be made by using 50mm x 36mm plywood supports and necessary hardware or gi stud & fc. gi strapped c stud is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 48mm x 34mm x 36mm x 0.50mm and gi f c channel is made with a cool rolled pre forming process to create a dimpled surface & ribbing effect across the surface having size of 50mm x 32mm x 32mm x 0.50mm, fitted on ceiling and / or wall and floor by pvc grip p rawl plug, coach bolt / screw as per requirement. glassing of 5 mm normal plain glass with necessary hardware & bidding (wooden / pvc) should be done in partition on demand of concern authority as per site requirement.,sandwich type acp aluminum partition : providing and fixing of sandwich type partition work by using solid coloured 3.0 mm thick acp panel having both side actual 0.20mm thick aluminum skin and 2.60mm ldpe core thickness, total inner structure should be made by using 38mm x 25mm x 1.5mm gi / alu. square pipe. the structure should be done by placing gi / alu. square pipe on periphery of work area than fix 600mm c/c vertical and 1200 mm c/c horizontally square pipe to complete plumb and level structure. square pipe should be fixed with metal screw as per requirement. finally 3.0 mm thick solid colored archer aluminum composite panel having above mentioned characteristics shall be apply on both side of partition, for filling joints good quality of silicon and other necessary materials should be used. glassing of 5 mm normal plain glass with necessary hardware & bidding should be done in partition on demand of concern authority as per site requirement.,single layer plywood aluminum partition : providing and fixing of single layer partition by using 8.0mm both side 1.0 mm laminated plywood frame structure should be made by using 63mm x 38mm x 1.2 mm actual thick aluminum framing. the structure should be done by placing vertical support at 600mm c / c and two horizontal support should be give in such a manner that first horizontal support should be place at 750mm from floor level than after second support at 1200mm above from first support to complete plumb and level structure. complete framing should be fixed with metal screw as per requirement. finally 8.0mm both side 1.0 mm laminated plywood or 4.0 mm thick wooden / metallic / stone / marble / solid finished archer aluminum composite partition panel having above mentioned characteristics shall be apply at center of partition framing gape by using rubber gasket (if required). glassing of 5 mm normal plain glass with necessary hardware & bidding should be done in partition on demand of concern authority.,aluminum door fabrication : providing and fixing of door having aluminum frame fabrication work having aluminum framing and 8.0 mm both side 1.0 mm laminated plywood section of 45mm x 45mm having 1.2mm actual thickness and top, center (if required) and bottom section of 110 mm x 45mm having 1.2 mm actual thickness with regular / anodized g4 coating. 8.0 mm both side 1.0 mm laminated plywood or 4.00 mm acp partition paneling fixed in aluminum door frame with necessary heard wears etc. acp should have wooden/ metallic / solid / stone / marble skin tone and actual 0.08 mm thick top and bottom skin. on demand of authority 4.00 mm clear glass will be fixed, inclusive of door handle, door stopper and door closer of stander make with labor.,door frame covering work : providing and applying of 8.0 mm plywood with 1.0 mm lamination sheet pre fabricated wooden frame and surrounding area of frame as per the frame size and look including tape sky folding and other necessary material with labour etc. complete.,sound proof and insulated sandwich panel partition : providing and fixing sound proof insulated sandwich panel partition with panel should be of 40 mm thick insulated puf panel with 0,35 ppgi sheet sandwich panels approved brand by having unique tongue and groove joining system and made out from two 0.35 ppgi materials aggregates. cold rolled formed “c" channel having dimension 32mm x 51 mm x 35 mm x 1.0 mm thick should be fixed to plinth/floor and roof using 100 mm x 8 mm screw with pvc wall plug reinforcement having dimension 125mm x10mm as per floor plan. the average distance of screw used for floor and top channel should be 450 mm minimum. the required height panel will be placed in floor mounted channel. for “l†shape, “t†shape “c†shape partition at corner of two panel 1mm thick 75 mm x 75 mm x 75 mm inner and 1 mm thick 75 mm x 75 mm x 125 mm outer corner should be placed at top and bottom using75 mm x 10 mm nut bolt with washer. the top of panels should be covered with "c" or l channel. the channel and panel should be fixed using self tapping screw having sizeof25mmx 8mm.required“c" channel for pillars covered or side wall or top should be used with required size screw and fastener. during panel installation all window, door and ventilation should be considered and all opening panel edges should be covered with g.i."c" channel and 60mm x 25mm or required size seasoned teakwood batten patti. as and where required fixed type 5mmthick plain glass window should be provided. if pillar required it should be of 50 mm x 50 mm m.s. square pipe with 100 mm x 100 mm x 5 mm base plate .the pillar with base plate should be rested on floor using 100mm x 15 mm self expanding nut bolt. steel structure cost will be considered seperetly. after installation of panel all gap between two panels should be fill up with silicone and top both side cover by laminated d stona decorative wood grain or italian marble stone design polywood or equivalent sheet 3mm or by specific grade glue if required sliding type window or fix type aluminum partly glazed, fully glazed or pvc window fix in required gap , pvc all top bottom and corner covered by d stona heavy laminated biding corner l of 30mm for covered of laminated sheet with wall pillar and top slab. all work should carry out with good finish and in true line as directed by officer in charge.,8 mm thick membrane coated stone plastic composite section double screen steel track & stud partitions : providing, supplying & installation of 8 mm thick membrane coated stone plastic composite section double screen steel track & stud partitions should be assembled at site using light gauge cold rolled formed galvanized steel sections having minimum thickness 0.55 mm to make a frame. iso 9001 certified “poly wood“ equivalent and approved make 8 mm thick membrane coated stone plastic composite panel designer series section should be fixed to either side of this frame using self drilling csk screws of suitable length 25mm/38mm etc cold rolled form 0.0.55 mm thick g.i floor channel having size of 30 mm x 50 mm x 30 mm should be fixed as per the layout plan at floor using nylon sleeve and screws or anchor fasteners of 6mm or 8mm diameter of suitable length at 450 mm / 610mm spacing. “cold rolled form 0.55 mm thick g.i top channel having size of 30 mm x 50 mm x 30 mm should be fixed to the slab or soffit in line and plumb to the floor channel. then the. 0.55 mm thick g.i studs section having size of 34 mm x 48.5 mm x 37 mm will be inserted into the floor channel at 601 mm centers or 450 mm centers. the cut outs should be provided in the web of studs are kept in a line to accommodate the service pipes like electrical and plumbing in the cavity of the partition. the studs will be cut short in length by 5 mm before inserting into the floor channel, to maintain the line and level through out the length of the partition. for the door and window opening head and bottom track should be g.i 0.55 mm thick having size of 30 mm x 50 mm x 30 mm. the door and window head and bottom track should be rain forced with seasoned wood having size of 47 mm x 34 mm. the distance between two studs should not be more than 300 mm at door and window opening. 9mm thick membrane coated spc 250 mm wide iso 9001 certified “ “polywood†make or equivalent and approved brand membrane coated designer series malty chambered hollow plastic section having minimum wall thickness 0.2 mm + 0.015 x 300 / 250 mm wide and tongue and groove joining system should be will be screws fixed to either side of the frame work using self drilling and tapping screws of csk head while making an “l†or “t†joint, care will be taken for panel inserted fixed at this junction, between two studs. . all opened end will be covered with “u†shape 9 mm x 28 pvc section or “l†shape pvc section having size of 25 mm x 25 mm. vertical wall panel and ceiling panel should be decorated at join point 35 x 35mm double side cornice section or 25 mm x30 mm single cornice section cynoacrylate adhesive of "thanga bond s 302" equivalent and approved brand should be used for joining panel and capping section. entire work should carry out in true line, design and finish as directed by engineer in charge.,vinyl carpet flooring : supplying and fixing of vinyl sports / commercial welded joint flooring having total thickness is 6.5 mm, europe standard glass fiber stable layer and europe glass fiber grid stable layer, tpu surface treatment, 100% pure pvc wear layer, closed foam bottom, roll width appro. 1.8 mtr, roll length appro. 15 to 20 mtr., abrasion resistance is = 300 mg, shock absorption is = 27 %, energy return is 0.4m/s.,vinyl carpet flooring : supplying and fixing of vinyl sports / commercial welded joint flooring having total thickness is 4.5 mm, six layers including uv layer wear layer, printing layer, glass fiber stable layer, foam bottom and honeycomb bottom, roll width appro. 1.8 mtr, roll length appro. 15 to 20 mtr.,vinyl carpet flooring : supplying and fixing of sports / commercial vinyl flooring having total thickness is 4.0 mm, 0.5 mm wear layer, pur (uv cured), printing layer, k class fiber layer, foam layer, roll width appro. 1.8 mtr., roll lagth is appro. 16 mtr.,vinyl carpet flooring : supplying and fixing of 3.0 mm thickness pvc laminated vinyl floor plank / tiles having size of 184 mm x 950 mm in plank and 470 mm x 470 mm in tiles, wear layer 0.3 mm, pu and antibacterial surface treatment, appro. weight per unit is 0.46 kg. / sqft.,vinyl carpet flooring : supplying and fixing of vinyl flooring commercial flooring having total thickness is 1.6 mm, four layers including compact layer, dimensional layer, printing layer, wear layer, uv pur surface treatment on surface, roll length appro. 25 mtr. , roll width appro. 2 mtr.,vinyl carpet flooring : supplying and fixing of 2.0 mm thickness pvc laminated vinyl floor plank having size of 184 mm x 950 mm in plank, wear layer 0.2 mm, appro. weight is 0.46 kg. / sqft. 0.30 kg./sqft.,vinyl carpet flooring : supplying and fixing of 17 mm pvc cushion mat having weight of 7.5 kg. /sq. mtr. , role width 1.22 mtr, role length 8 mtr. to 12 mtr.,vinyl carpet flooring : providing and fixing of vinyl carpet flooring having total thickness of 1.0 mm, homogeneous with 0.1 mm wear layer pvc flooring shall have antibacterial property, four layers should contained easy clean uv treated wear layer, print layer, dimensional layer and compact layer, dimensional stability shall be less than or equal to 0.4 as per stander en iso 23999, light fastness shall be greater than or equal to 6 as per en iso 105 b02 stander, roll length appro. 25 mtr., roll width appro. 2 mtr. the1.6 mm lg familia role form pvc carpet having above mentioned characteristics shall be fixed on floor by using required grade of water base / oil base solvent for easy maintenance.,decorative pvc sofa set : supply of solid pvc sofa set for officer chamber / waiting room using 15mm thick solid rigidlam celuka pvc ply in framing with 32 d.p.u. foam 3†in back and 4†in sheet folding cushions with micro velvet etc. complete. back side height 0.75 meter and total width 0.75 meter.,tailor made sofa : providing & fixing of tailor made sofa made from 18mm plywood frame (as per the requirement of area) having total height (including back) 860mm, total width should be mini. 685mm and up to 760mm, length should be as per requirement; seat depth of finished sofa should be mini. 460mm and up to 535mm, 5†32d foam at seat and 2.5†32 d foam at back, with / without handle, steel legs, good quality of upholstery at seat, back, front and side and back side should be covered with madapat, bottom of sofa seat should be supported by spiral spring mechanism with inside burlap or equivalent fabric covers.,pvc meter box : providing and fixing electric meter box with shutter using 19mm. x 19mm. galvanized square tube of 18 gauge for frame with 5mm thick pvc partition and shutter using 12mm thick solid rigidlam celuka pvc ply with 5mm prelam pvc sheet with necessary adhesive with s.s. fixture and fastening etc comp. depth 0.45 meter.,solid pvc plastic ply selves : providing and fixing 15mm thick solid rigidlam celuka pvc ply for selves with solvent cement to achieve sturdy vertical and horizontal shelves which can be screwed from the size of the cupboard /platform or rack at the required height with 15mm x 15mm galvanized square tube on front side with "c" chanel of 5mm thick prelam pvc sheet for extra strength of selves etc comp.,p/f pvc (sintex or equivalent hollow section) made shelves with vertical and horizontal support of section size of 415x25mm with steel tube etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made file cabinet system section of 20 mm thick with required inside self horizontal & vertical of size of 20 mm thick section, size of cabinet 1.20 x 1.20 x 0.40 mtr.,supply & fixing pvc (sintex or equivalent hollow section) made rack (side rack) open type size : 0.90 length x 0.40 width x 0.75 height section size of 20 mm thick for side and center shelves total three shelves etc. comp.,supply & fixing pvc (sintex or equivalent hollow section) made laboratory / library rack size : 1.85 height x 0.40 width x 0.90 height section size of 20 mm thick for side and center shelves total five shelves etc. comp.,pvc sheet/ ply & celuka ply supplying of (rajshri plastiwood indore or equivalent) made solid pvc, prelam pvc sheets/ solid pvc ply and celuka pvc ply as per company’s current price list. (a) 5mm thick pvc sheet.,pvc sheet/ ply & celuka ply supplying of (rajshri plastiwood indore or equivalent) made solid pvc, prelam pvc sheets/ solid pvc ply and celuka pvc ply as per company’s current price list. (c) 12mm celuka ply,pvc sheet/ ply & celuka ply supplying of (rajshri plastiwood indore or equivalent) made solid pvc, prelam pvc sheets/ solid pvc ply and celuka pvc ply as per company’s current price list. (d) 15mm celuka ply,pvc sheet/ ply & celuka ply supplying of (rajshri plastiwood indore or equivalent) made solid pvc, prelam pvc sheets/ solid pvc ply and celuka pvc ply as per company’s current price list. (b) 5mm thick s.s. prelam pvc sheet...
Due Date : October 27, 2023
Tender Value : ₹ Ref. Documents
